TOSHIBA Field Effect Transistor Silicon N Channel Junction Type
2SK30ATM
Low Noise Pre-Amplifier, Tone Control Amplifier and
DC-AC High Input Impedance Amplifier Circuit
Applications
•High breakdown voltage: V GDS = −50 V
•High input impedance: I GSS = −1 nA (max) (V GS = −30 V)
•Low noise: NF = 0.5dB (typ.)
(V DS = 15 V, V GS = 0, R G = 100 kΩ, f = 120 Hz)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics Symbol
Rating
Unit
Gate-drain voltage V GDS−50V
Gate current I G 10
mA
Drain power dissipation P D 100
mW
Junction temperature T j125 °C
Storage temperature range T stg−55~125 °C
Note: Using continuously under heavy loads (e.g. the application of
high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and
individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
tm2007>
丁度.
巴拉斯Characteristics Symbol Test
Condition Min
Typ.
Max Unit Gate cut-off current I GSS V GS=−30 V, V DS= 0 ⎯⎯−1.0nA Gate-drain breakdown voltage V (BR) GDS V DS= 0, I G=−100 μA −50 ⎯⎯ V
Drain current I DSS
(Note)
V DS= 10 V, V GS= 0 0.3 ⎯ 6.5 mA
雅安市委书记徐孟加
Gate-source cut-off voltage V GS (OFF)V DS= 10 V, I D= 0.1 μA −0.4 ⎯−5.0V Forward transfer admittance ⎪Y fs⎪V DS= 10 V, V GS= 0, f = 1 kHz 1.2 ⎯⎯ mS Input capacitance C iss V GS= 0, V DS= 0, f = 1 MHz ⎯ 8.2 ⎯ pF Reverse transfer capacitance C rss V GD=−10 V, V DS= 0, f = 1 MHz ⎯ 2.6 ⎯ pF Noise figure NF V DS= 15 V, V GS= 0
内家
拳法R G= 100 kΩ, f = 120 Hz⎯ 0.5 5.0 dB
Note: I DSS classification R: 0.30~0.75, O: 0.60~1.40, Y: 1.20~3.00, GR: 2.60~6.50 Unit: mm
JEDEC TO-92 JEITA SC-43 TOSHIBA 2-5F1C Weight: 0.21 g (typ.)
加勒比
彭真
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL •The information contained herein is subject to change without notice.
•TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation i
nstruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
•The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议