product: 物料 | Ordinary Cement 水泥 |
bulk density: 物料容重: | 0.9 – 1.1 kg/dm³ (fluidized) 0.9 – 1.1 kg/dm³〔流性〕 |
fineness: 粒度: | max. 4200 cm²/g (Blaine) 最大布氏粒度4200 cm²/g |
temperature: 物料温度: | 80° C max. 最高温度80° C |
moisture: 物料湿度: | 0.5% H2O max. 最大含水率0,5% |
voltage: 电压 | 400 V, +/- 5% |
frequency: 频率: | 50 cps, +/- 2% |
system configuration: 系统设置: | TN |
control voltage: 控制电压: | 220 VAC |
control voltage: 控制电压: | 24 V DC |
insulation class: 绝缘等级: | F |
type of protection: 保护等级: | IP54 |
installation above main sea level: 安装海拔: | < 1000m |
Required ambient temperature: 设备工作环境温度: | max. +45 °C min. +5 °C |
machine type: 设备形式: | HAVER-ROTO-Packer Type 8 RSC |
net machine output: 设备产能 | Each max. 2,400 bags/h each 50 kg |
bag weights包装袋规格: | 50 kg |
kind of bag: 包装袋形式 | Sewn Woven PP valve bags. At least 100 sample bags are needed for the test before it is confirmed that the bag is suitable for the automatic bag placer. 缝线编制阀口袋 |
Sample bag(s): 样袋 | To be provided. 有待提供 |
empty bag dimensions: 包装袋尺寸: | still have to be indicated 有待说明 |
width of bag valve: 阀口尺寸 | still have to be indicated 有待说明 |
height of filling tube: 灌包咀高度: | 1,200 mm |
weight accuracy | +-150g deviation as average of 10 |
consecutive bags per spout, | |
with sufficient bag size, | |
continuous packing operation and relatively | |
constant bulk density process | |
包装精度: | 如果所用包装袋尺寸适宜,包装进程无连续并且物料容重恒定,同一灌包咀连续包装10袋的平均误差为正负150克。 |
total pressed-air required: | Detailed by the consumption list |
with a gauge pressure of 6 bar | |
quality as per ISO 8573.1 | |
particle size: 5my | |
concentration: 5mg/m3 | |
pressure dew point: + 2° C minimum | |
- 20° C maximum | |
residual oil quantity: | |
25mg/m³ maximum | |
压缩空气需求量: | 详见能耗表 压力6巴,质量标准ISO8573.1 杂质粒径:5微米 杂质密度:5毫克/立方米空气 露点:+ 2° C时最小 -20° C时最大 残留油量: 最大密度25mg/m³ |
total dedusting air required: 总收尘空气需求量: | Detailed by the consumption list 详见能耗表 |
air volumes and pressure at: | 1 bar 20° C |
空气量及压力 | pressure data refer to differential pressures 压力1巴,温度20° C时的压力数据根据不同的压力而定 |
coating: 涂漆: | colour RAL 7035 (light grey) 欧洲标标号7035〔浅灰〕 |
acc. to HTT-Standard painting | |
耦合度 |
PACKING PLANT 包装车间 | |||
01.00 | 7月份CPI同比上涨1 | Silo cut-off gate 手动闸板阀 | |
technical data技术参数: | ||
inlet/outlet section 进出口尺寸 | : 400x400 mm | |
construction height 整体高度 | : 100 mm | |
made of steel plate, with spindle, hand wheel and seals 钢制,螺旋调节杆和旋转手柄并配有密封 | ||
01.01 | 1 | Cement feeding system to the ROTO Packer | |
包装机进料装置 | |||
technical data技术参数: | ||
each consisting of每套包括: | ||
1 inlet box, 1个进料箱 | ||
made of steel plate construction, with inlet flange and outlet spouts, with aerated bottom 采用钢板制作,进出料口法兰,充气口。 | ||
with special synthetic fabric, for inlet-box-aeration 特殊混合纤维用于进料箱充气层 | ||
nec. air supply piping, 必要的气管 | ||
including formed pieces, fittings, sealings and accessories 包括各种预制成型件,密封件及其他附件等 | ||
incl. 4 Plymesh-aeration pads for the silo | ||
consisting of: | ||
each plate 100 x 200 mm, for installation inside the | ||
storage silo, with connection R 1/2", with 2/2 way | ||
valve and connection pipings 包括4个网状透气垫,每个垫子100X200毫米见方,安装在储料仓中,配有4分管管接头、阀门和连接收。 | ||
1 flow-control gate, 1个流量控制阀 | ||
pneumatically operated for open, closed, one intermediate | ||
position and dust-tight sealing, closing in case of power | ||
failure, made of casted steel, with pneumatic | ||
piston with solenoid valve, safety coupling for hand | ||
a管理模式 | operation, switch box with limit switches 工业设计气动控制,有开、闭、中间位,带有密闭防尘密封,铸钢制成,由带电磁阀的气缸控制,断电自动关闭,带有手动操作的平安离合器,配有带限位开关的控制盒。 | |
1 transfer chute, 1个下料溜子 | ||
made of steel plate construction, incl. fastening material, | ||
sealings and accessories 钢板制成,螺栓紧固,带有密封件和附件 | ||
HAVER-ROTO-PACKER HAVER回转包装机 | |||
02.00 | 1 | HAVER ROTO-PACKER Type 8RSC | |
HAVER回转包装机 8RSC型 | |||
technical data技术参数: | ||
no. of operators 操作工人数 | : 1 | |
direction of rotation 旋向 | : clockwise 顺时针 | |
rotation drive 回转驱动 | : 1.50 kW | |
impeller drive 叶轮驱动 | : 4 kW | |
total power installed 总装机功率 | : 33.5 kW | |
total power consumption 总消耗功率 | : 15.00 kW | |
pressed air quantity 压缩空气耗量 | : 36 m³/h | |
Pressure 压力 | : 6.0 bar | |
dedusting air quantity 除尘风量 | : 8,500 m³/h | |
HAVER ROTO-PACKER according to the | |
vertical impeller filling system, | |
for bagging into self-closing valve type bags and | |
simultaneous weighing | |
采用立式叶轮灌装喂料系统,用于自封口阀口袋,即时称重 | |
each consisting of每台包括: | |
central bearing, maintenance free 中央轴承,免维护 | |
running in an oil bath, power supply over slip ring | |
power feed in the top, pressed-air supply over turning | |
nockle connection also in the top of the packer | |
油浴,动力由顶部滑环体接入,缩空气通过包装机顶部的万向接头进入包装机 | |
pressed-air maintenance device 压缩空气维护装置 | |
with pressure control valve, manometer, oil and water | |
separator, with automatic outflow and closing valve | |
包括压力控制阀、压力计、油水别离器、溢流阀和截止阀 | |
rotation drive 回转驱动 | |
Gear motor with frequency converter 由变频调速电机驱动 | |
rotating packing hopper | |
made of steel plate, with labyrinth seal, inlet chute, | |
outlet spout for each filling station, scale brackets, | |
level control switch for control of product feed | |
钢制,迷宫式密封,进料溜槽, | |
针对每个灌包咀的卸料口,刻度架,料位开关 | |
each individual filling station consisting of: 每个独立喂料装置包括: | |
vertical filling impeller 立式喂料叶轮 | |
with the impeller blade wheel with strong bearing, driving | |
motor for start-stop operation, installed outside of the | |
dust area, V-belt drive with protection hood, lateral | |
maintenance cover, aeration control depending on | |
filling speed | |
给料叶片配有巩固的轴承,电机装在料粉区域之外, 由V型皮带驱动,带皮带护罩,侧面有外壳, 根据充料速度进展充气控制 | |
the slide gate valves for filling shutoff 滑板式流量控制阀 | |
in the filling channel, actuated by a pneumatic three- | |
本文发布于:2024-09-20 16:38:52,感谢您对本站的认可!
本文链接:https://www.17tex.com/xueshu/676610.html
版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。
留言与评论(共有 0 条评论) |