ip address 192.168.3.5 255.255.255.252. What additional comma 1.A technician configures the Fa0/0 interface on a router with
issued by the technician to activate the interface to forward traffic?
Router(config-if)# exit
Router(config-if)# no shutdown
Router(config-if)# clock rate
Router# copy running-config startup-config
Refer to the exhibit. A technician has configured the interfaces on the Router, but upon inspecti2008奥运会会徽
on discovers that inte FastEthernet0/1 is not functioning. Which action will most likely correct the problem with FastEthernet0/1? A clock rate should be added to the interface configuration.
The subnet mask should be added to the interface configuration.
An interface description needs to be added to the interface configuration.
The no shutdown command needs to be added to the interface configuration.
3
Refer to the exhibit. A router interface is configured with the command
ip address 172.16.3.31 255.255.192.0. Which set o values would allow a computer that is connected to the router interface to communicate with remote networks?
A: 172.16.3.254
B: 255.255.192.0
doctoersC: 172.16.3.31
A: 172.16.3.31
B: 255.255.192.0
C: 172.16.3.255
A: 172.16.3.254
B: 255.255.255.0
C: 172.16.3.31
A: 172.16.3.31
B: 255.255.255.0
贾昊悦C: 172.16.3.1
4
Refer to the exhibit. On the basis of the
show running-config output, which option correctly reflects the routes that will b routing table?
ssss
5
Refer to the exhibit. PC1 is unable to access the Internet. What is the cause of the problem? An incorrect IP address is configured between the two routers.
No static route is configured on Router2.
A routing loop has occurred.
泰山亚龙湾水上乐园No routing protocol is configured on either of the two routers. Refer to the exhibit. Which three statements are true of the routing table for Router1? (Choose three.)
allen试验The route to network 172.16.0.0 has an AD of 156160.
T he route to network 172.16.0.0 has an AD of 156160.
Network 192.168.0.16 can best be reached using FastEthernet0/0.
The AD of EIGRP routes has been manually changed to a value other than the default value.
Router1 is running both the EIGRP and OSPF routing process.
Network 172.17.0.0 can only be reached using a default route.
No default route has been configured.
7
Refer to the exhibit. The network has three connected routers: R1, R2, and R3. The routes of all three routers are d are operational and pings are not blocked on this network.
Which ping will fail?
from R1 to 172.16.1.1
from R1 to 192.168.3.1
from R2 to 192.168.1.1
f rom R2 to 192.168.1.1
from R2 to 192.168.3.1
8