Low Cost EtherNet/IP Slave Adapter for CP1 Series Micro PLCs The CP1W-EIP01-US is a low cost adapter that allows EtherNet/IP communications for the CP1H and CP1L PLCs with an available option board slot. The addition of an EtherNet/IP option board turns the PLC into an Intelligent Slave that easily connects to an EtherNet/IP Master for control & monitoring data. Key Features and Benefits •
Easy Mounting - The adapter mounts in an unused Option Board Slot of the CP1 PLC •
三维度Slave connections – The CP1W-EIP01-US turns a CP1 PLC into an Intelligent EtherNet/IP Slave that shares information using Data Link (Implicit Messaging). The CP1 must be connected to an EtherNet/I
P Master for data sharing. • Intelligent Slave – Each PLC is a powerful motion controller* (CP1H - 4 Axis, CP1L – 2 Axis)
with high speed interrupts, Real Time Clock, IEC61131-3 Programming, PID, Floating Point
Math and is expandable with analog or digital I/O. The addition of an EtherNet/IP option board
turns the PLC into an Intelligent Slave.地面沉降
*Transistor models
•
ControlLogix & CompactLogix Connect – Easily connect Rockwell EtherNet/IP Master to the CP1 with EtherNet/IP adapter
水蛭胶囊Typical System Configuration Specification
Part Number
Description CP1W-EIP01-US
CP1 EtherNet/IP Slave Adapter Type
100Base-TX (Can be used as 10Base-T) Applicable PLCs
CP1L-L14, CP1L-L20, CP1L-M30, CP1L-M40, CP1L-M60, CP1H Transmission Distance
100 m (distance between hub and node) Number of units mounted
One (either port can be used) (a CP1W-ETN01-US can also be mounted in an open slot) Communication Method
EtherNet/IP Max connections per device
One connection (ie: EtherNet/IP Master to EtherNet/IP Slave) Data Link Set-up
10/50/100 Words - Produced data D1000-D1099, Consumed data D1100-D1199 Current IP Address
D1200, D1201 (D1200=1st & 2nd Octets in Hex, D1201=3rd & 4th Octets in Hex) Default IP Address
192.168.250.11 Web Page IP Address Set-up
192.168.250.11 (Default) Requested Packet Interval (RPI)
10ms (minimum recommended)
CP1W-EIP01-US
CP1 EtherNet/IP Adapter
r2v怎么用EtherNet/IP Slave Nodes (up to 128) EtherNet/IP Master EtherNet/IP Switch EtherNet/IP Switch Downloaded from Elcodis electronic components distributor
Intelligent EtherNet/IP Slave
Additional literature can be obtained 247 .
W450 - CP1H Operation Manual
W451 - CP1L / CP1H Programming Manual
W462 - CP1L Operation Manual
W465 - CJ / CS EtherNet/IP Operation Manual
W472 - CJ2 Hardware Manual
W473 - CJ2 Software Manual
W452 - NSJ Operation Manual
V227 - W4S EtherNet/IP Switch
In the above example the CP1H PLC communicates to the CJ/CS via EtherNet/IP. The CP1H PLC can control 4 axis of servo motors while also reading 4 high speed encoder inputs. An additional option port can be added for communications to AC Drives, Temperature Controllers, or other devices. Built into the CPU are 24 Digital In, 16 Digital Out and 6 Analog I/O (4 configurable analog i
nputs & 2 configurable analog outputs). The PLC is expandable up to 320 digital I/O along with 2 CJ Special I/O
行动导向
教学法modules (Analog, Motion, RFID, Network or Communication cards). OMRON ELECTRONICS LL C • THE AMERICAS HEADQUARTERS
Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • 247
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • 247
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
S ão P aulo, SP, Brasil • 55.11.2101.6300 • br
日本现人类
头盖骨OMRON ELECTRONICS MEXICO SA DE CV • HEAD OFFICE Apodaca, N.L. • 52.811.156.99.10 • 001.800.556.6766 • **************OMRON ARGENTINA • SALES OFFICE Cono Sur • 54.11.4783.5300OMRON CHILE • SALES OFFICE Santiago • 56.9.9917.3920O
THER OMRON LATIN AMERICA SALES 54.11.4783.5300© 2009 Omron Electronics LLC
Cat. No. P062I-E-01 10/09 Specifications are subject to change without notice.Downloaded from Elcodis electronic components distributor
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议