MK60DN512ZVLQ10资料

K60P144M100SF2 K60 Sub-Family Data Sheet
Supports the following:
MK60DN256ZVLQ10,
MK60DX256ZVLQ10,
榆林杀人案MK60DN512ZVLQ10,
乔MK60DN256ZVMD10,
MK60DX256ZVMD10,
MK60DN512ZVMD10
Features
•Operating Characteristics
–Voltage range: 1.71 to 3.6 V
–Flash write voltage range: 1.71 to 3.6 V扬中市第一中学
–Temperature range (ambient): -40 to 105°C
•Performance
–Up to 100 MHz ARM Cortex-M4 core with DSP
instructions delivering 1.25 Dhrystone MIPS per
MHz
•Memories and memory interfaces
–Up to 512 KB program flash memory on non-
FlexMemory devices
–Up to 256 KB program flash memory on
FlexMemory devices
–Up to 256 KB FlexNVM on FlexMemory devices –  4 KB FlexRAM on FlexMemory devices
–Up to 128 KB RAM
–Serial programming interface (EzPort)
–FlexBus external bus interface
•Clocks
–  3 to 32 MHz crystal oscillator
–32 kHz crystal oscillator
–Multi-purpose clock generator
•System peripherals
–Multiple low-power modes to provide power
optimization based on application requirements –Memory protection unit with multi-master
protection
–16-channel DMA controller, supporting up to 63
request sources
–External watchdog monitor
–Software watchdog
–Low-leakage wakeup unit •Security and integrity modules
–Hardware CRC module to support fast cyclic
redundancy checks
–Hardware random-number generator
–Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms
–128-bit unique identification (ID) number per chip
•Human-machine interface
–Low-power hardware touch sensor interface (TSI)–General-purpose input/output
•Analog modules脱氧核糖
–Two 16-bit SAR ADCs
–Programmable gain amplifier (PGA) (up to x64)
integrated into each ADC
–Two 12-bit DACs
–Three analog comparators (CMP) containing a 6-bit DAC and programmable reference input
–Voltage reference
•Timers
–Programmable delay block
–Eight-channel motor control/general purpose/PWM
timer
–Two 2-channel quadrature decoder/general purpose
timers
–IEEE 1588 timers
–Periodic interrupt timers
–16-bit low-power timer
–Carrier modulator transmitter
–Real-time clock
Freescale Semiconductor Document Number: K60P144M100SF2 Data Sheet: Technical Data Rev. 7, 02/2013 Freescale reserves the right to change the detail specifications as may be
required to permit improvements in the design of its products.
© 2011–2013 Freescale Semiconductor, Inc.
•Communication interfaces
–Ethernet controller with MII and RMII interface to external PHY and hardware IEEE 1588 capability –USB full-/low-speed On-the-Go controller with on-chip transceiver
–Two Controller Area Network (CAN) modules
小哥白尼趣味科学
–Three SPI modules
–Two I2C modules
–Six UART modules
–Secure Digital host controller (SDHC)
–I2S module
Table of Contents
1Ordering parts (5)
1.1Determining valid orderable parts (5)
2Part identification (5)
2.1Description (5)
2.2Format (5)
2.3Fields (5)
2.4Example (6)
3Terminology and guidelines (6)
3.1Definition: Operating requirement (6)
3.2Definition: Operating behavior (7)
3.3Definition: Attribute (7)
3.4Definition: Rating (8)
3.5Result of exceeding a rating (8)
3.6Relationship between ratings and operating
requirements (8)
3.7Guidelines for ratings and operating requirements (9)
3.8Definition: Typical value (9)
3.9Typical value conditions (10)
4Ratings (11)
4.1Thermal handling ratings (11)
4.2Moisture handling ratings (11)
4.3ESD handling ratings (11)
4.4Voltage and current operating ratings (11)
5General (12)
安徽农业大学学报
5.1AC electrical characteristics (12)
5.2Nonswitching electrical specifications (12)
5.2.1Voltage and current operating requirements (13)
5.2.2LVD and POR operating requirements (14)
5.2.3Voltage and current operating behaviors (14)
5.2.4Power mode transition operating behaviors (16)
5.2.5Power consumption operating behaviors (17)
5.2.6EMC radiated emissions operating behaviors (20)
5.2.7Designing with radiated emissions in mind (21)
5.2.8Capacitance attributes (21)
5.3Switching specifications (21)
5.3.1Device clock specifications (21)
5.3.2General switching specifications (21)
5.4Thermal specifications (22)
5.4.1Thermal operating requirements (22)
5.4.2Thermal attributes (23)
6Peripheral operating requirements and behaviors (24)
6.1Core modules (24)
6.1.1Debug trace timing specifications (24)
6.1.2JTAG electricals (25)
6.2System modules (28)
6.3Clock modules (28)
6.3.1MCG specifications (28)
6.3.2Oscillator electrical specifications (30)
6.3.332 kHz Oscillator Electrical Characteristics (32)
6.4Memories and memory interfaces (33)
6.4.1Flash electrical specifications (33)
6.4.2EzPort Switching Specifications (37)
6.4.3Flexbus Switching Specifications (38)
6.5Security and integrity modules (41)
6.6Analog (41)
6.6.1ADC electrical specifications (41)
6.6.2CMP and 6-bit DAC electrical specifications (49)
6.6.312-bit DAC electrical characteristics (51)
6.6.4Voltage reference electrical specifications (54)
6.7Timers (55)
6.8Communication interfaces (55)
6.8.1Ethernet switching specifications (55)
6.8.2USB electrical specifications (57)
6.8.3USB DCD electrical specifications (57)
6.8.4USB VREG electrical specifications (58)
6.8.5CAN switching specifications (58)
6.8.6DSPI switching specifications (limited voltage
range) (59)
6.8.7DSPI switching specifications (full voltage
range) (60)
6.8.8Inter-Integrated Circuit Interface (I2C) timing (62)
6.8.9UART switching specifications (63)
6.8.10SDHC specifications (63)
6.8.11I2S switching specifications (64)
6.9Human-machine interfaces (HMI) (67)
6.9.1TSI electrical specifications (67)
7Dimensions (68)
7.1
Obtaining package dimensions (68)
8Pinout (68)
8.1K60 Signal Multiplexing and Pin Assignments (68)
8.2K60 Pinouts (74)
9Revision History (76)
1Ordering parts
1.1Determining valid orderable parts
Valid orderable part numbers are provided on the web. To determine the orderable part numbers for this device, go to freescale and perform a part number search for the following device numbers: PK60 and MK60.
2Part identification
2.1Description
Part numbers for the chip have fields that identify the specific part. You can use the values of these fields to determine the specific part you have received.
2.2Format
Part numbers for this device have the following format:
Q K## A M FFF R T PP CC N
2.3Fields
This table lists the possible values for each field in the part number (not all combinations are valid):

本文发布于:2024-09-21 00:50:07,感谢您对本站的认可!

本文链接:https://www.17tex.com/xueshu/576164.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:榆林   扬中市   趣味   安徽   杀人案   中学
留言与评论(共有 0 条评论)
   
验证码:
Copyright ©2019-2024 Comsenz Inc.Powered by © 易纺专利技术学习网 豫ICP备2022007602号 豫公网安备41160202000603 站长QQ:729038198 关于我们 投诉建议