Technical Data Sheet
Infrared Remote-control Receiver Module
IRM-3638N3 Features
‧High protection ability against EMI .
‧Circular lens to improve the receive characteristic.
‧Line-up for various center carrier frequencies.
股份制商业银行‧Low voltage and low power consumption.
‧High immunity against ambient light.
‧Photodiode with integrated circuit.
‧TTL and CMOS compatibility.
‧Long reception distance.
‧High sensitivity.
融合蛋白分离纯化
‧Pb free.
Descriptions
The device is a miniature type infrared remote control
system receiver which has been developed and designed by
utilizing the most updated IC technology. The PIN diode
and preamplifier are assembled on lead frame, the epoxy
package is designed as an IR filter. The demodulated
output signal can directly be decoded by a microprocessor.
Applications
1. Optical switch
2. Light detecting portion of remote control
․AV instruments such as Audio, TV, VCR, CD, MD, etc.
․Home appliances such as Air-conditioner, Fan , etc.
․The other equipments with wireless remote control.
․CATV set top boxes
․Multi-media Equipment
PART MATERIAL COLOR
Chip Silicon --- Lead Frame SPCC Silver white
Package Epoxy Black
IRM-3638N3
Package Dimensions
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit Notice
Supply Voltage Vcc 0~6 V Operating Temperature Topr -25 ~ +85 ℃ Storage Temperature Tstg -40 ~ +85 ℃
Soldering Temperature
Tsol
260
℃
4mm from mold body
less than 10 seconds
IRM-3638N3 Recommended Operating Condition
Supply Voltage Rating: Vcc 2.7V to 5.5V
Electro-Optical Characteristics (Ta=25℃, and Vcc=3.0V)
Parameter Symbol
MIN.
TYP.
MAX.
Unit
Condition Consumption Current Icc --- --- 2 mA No signal input B.P.F Center Frequency Fo --- 38 --- KHz Peak Wavelength λp--- 940 --- nm
L014 --- ---
Reception Distance
L45 6 --- ---
m
Half Angle(Horizontal) Θh--- 45 --- deg At the ray axis
*1
Half Angle(Vertical) Θv--- 45 --- deg
High Level Pulse Width T H400 --- 800 μs Low Level Pulse Width T L400 --- 800 μs At the ray axis
*2铸轧
High Level Output Voltage V H 2.7 --- --- V
Low Level Output Voltage V L --- 0.2 0.5 V
Notes:
*1:The ray receiving surface at a vertex and relation to the ray axis in the range of θ= 0° and θ=45°. *2:A range from 30cm to the arrival distance. Average value of 50 pulses.
IRM-3638N3
Test Method:
The specified electro-optical characteristics is satisfied under the following
Conditions at the controllable distance.
c Measurement place
A place that is nothing of extreme light reflected in the room.
Project the light of ordinary white fluorescent lamps which are not high
Frequency lamps and must be less then 10 Lux at the module surface.
(Ee≦10Lux)
e Standard transmitter
动物之爱
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output
课堂教学即时评价
Wave form shown in Fig.-1.According to the measurement method shown in
Fig.-2 the standard transmitter is specified.
However , the infrared photodiode to be used for the transmitter should be
λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B(Vr=5V).
(Standard light / Light source temperature 2856°K).
f Measurin
g system
According to the measuring system shown in Fig.-3