NOVEMBER 2002NBR 14136
ABNT - Brazilian Association of
T echnical Standards Main office:
Rio de Janeiro
Av. Treze de Maio, 13 – 28th floor ZIP CODE 20003-900 – P.0.box 1680
Rio de Janeiro - RJ
Tel.: (21) 3974-2300
Fax: (21) 2240-8249/2220-6436 Web: br Copyright © 2002,
ABNT – Associação Brasileira de Normas Técnicas
Printed in Brazil
All rights reserved Plugs and socket-outlets for household and similar purposes up to
20 A/ - Standardization
Origin: Project NBR 14136:2001
ABNT/CB-03 - Brazilian Committee of Electricity
CE-03:023.02 - Study Commission for Switches, Socket-outlets, Pins and Plates for General Use
特比萘芬
NBR 14136 - Plugs and socket-outlets for household and similar purposes Standardization
Descriptors: Plug. Socket-outlet
This Standard has been based on IEC 60906-1:1986
This Standard cancels and replaces NBR 14136:1998
Valid from December 29, 2002 on
Key-words: Plug. Socket-outlet20 pages
Summary
Foreword
1Objective
2Normative references
3Requirements
网上书屋ANNEX
A Figures
Foreword
ABNT – The Brazilian Association of Technical Standards - is the National Committee of Standardization. The Brazilian standards, which content is responsibility of Brazilian Committees (ABNT/CB) and the Organizations of Sectorial Standardization (ABNT/ONS), are elaborated by Study Commissions (CE), composed by representatives of the involved sections, like: producers, consumers and neutral (universities, laboratories and other).
中国证监会微博
The drafts of Brazilian standards, elaborated in the extent of ABNT/CB and ABNT/ONS, are circulated for Public Consultation among ABNT associates and interested parties.
This Standard contains the annex A, it is normative.
1Scope
1.1This Standard sets the dimensions for plugs and socket-outlets with nominal
characteristics up to 20 A/250 , intended for household and similar purposes, to be used in the connection to distribution systems with nominal tensions rated between 100 V and 250
1.2This Standard is applied to the plugs and socket-outlets specified in NBR 6147.
1.3This Standard is not applied to the plugs and socket-outlets designed to the
class 0 equipments.
2Normative references
The following normative documents contain provisions which, through reference in this text, constitut
e provisions of this Standard. The indicated issues were in force when this Standard was published. As every Standard might suffer revisions, it is recommended to those that accomplish agreements based on this document to verify the convenience of using the most recent issue of the mentioned Standards. ABNT maintains registers of currently valid editions.
NBR 6147:2000 - Plugs and socket-outlets for household and similar purposes - Specification
NBR 11467:1991 - graphic Symbols for use in equipments - Symbols
2 NBR14136:2002
3Requirements
3.1Dimensions
The plugs and socket-outlets shall be in agreement with the dimensions of the
appropriate figures of annex A.
3.2Compatibility
The 20A socket-outlets shall admit the insertion of 10 A and 20 A plugs, and the socket-outlets with earthing-contact shall admit the insertion of plugs with and without earthing-pin.
The 10 A socket-outlets shall not admit the insertion of 20 A plugs.
/ ANNEX A
NBR14136:2002 3
建议全民开展死亡教育技术创新的重要性Annex A (normative)
Figures
Dimensions in millimeters
Sharp edges
slightly rounded
Detail of the
entrance holes
Protecting surface
NOTES
阿尔福斯1See explanatory notes on page 9.
2These figures are not intended to govern the plan, except in the shown dimensions.
3Several constructions can be used, such as multiple socket-outlets.
Figure 1 – Socket-outlet to built-in, two-pole, with earthing contact - 10 A/250 V c.a.
4 NBR14136:2002
Dimensions in millimeters
Sharp edges
slightly rounded
Detail of the
entrance holes
Protecting surface NOTES
1See explanatory notes on page 9.
2These figures are not intended to govern the plan, except in the shown dimensions.
3 Several constructions can be used, such as multiple socket-outlets.
Figure 2 – Socket-outlet to built-in, two-pole, with earthing contact - 20 A/250 Vc.a.
NBR14136:2002 5
Dimensions in millimeters
Protecting surface
With protecting surface Without protecting surface
NOTES
1See explanatory notes on page 9.
2For the dimensions that were not indicated see figure 1.
3These figures are not intended to govern the plan, except in the shown dimensions.
4Several constructions can be used, such as multiple socket-outlets.
Figure 3 - Socket-outlet to semi-built-in or to put upon, two-pole, with earthing-contact - 10 A/250 Vc.a.
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议