Material Safety Data Sheet
Copyright, 2003, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME:3M(tm) Scotch-Grip(tm) Fastener Adhesive EC-2510 (Neutral) (Dry Composition - Not As
Sold)
MANUFACTURER:3M
DIVISION:Automotive Division
ADDRESS:3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date:07/11/2003
Supercedes Date:Initial Issue
Document Group:18-6499-0
Product Use:
Specific Use:Assembly of motored machinery
SECTION 2: INGREDIENTS
Ingredient C.A.S. No.% by Wt
Bisphenol A-Epichlorohydrin copolymer25068-38-6 35 - 45
Urea, polymer with formaldehyde and 1,3,5-triazine-2,4,6-triamine25036-13-9 30 - 40
POLYVINYL ALCOHOL, REACTION PRODUCT WITH BUTYRALDEHYDE63148-65-2 1 - 10
4,4'-Trimethylenedipiperidine16898-52-5 1 - 10
上海知音心理咨询
N-Butyl glycidyl ether2426-08-6 1 - 5 Silica gel63231-67-4 1 - 5
2-ethyl-4-methyl-imidazole931-36-2 1 - 5
NOTE: This Material Safety Data Sheet is intended to be descriptive of a "dried" fastener adhesive, although this is not the form in which it is sold and applied. Readers of this MSDS and applicators of the product are urged to consult Document Number 05-9044-8, which describes the "wet" form of 3M(tm) Scotch-Grip(tm) Fastener Adhesive, the form in which it is sold.
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Odor, Color, Grade: Residual toluene odor
General Physical Form: Solid
Immediate health, physical, and environmental hazards: May cause chemical eye burns. May cause severe skin irritation. May cause allergic skin reaction. Contains a chemical or chemicals which can cause birth defects or other reproductive harm. May cause target organ effects.
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Corrosive (Eye Burns): Signs/symptoms may include cloudy appearance of the cornea, chemical burns, severe pain, tearing, ulcerations, significantly impaired vision or complete loss of vision.
Skin Contact:
Severe Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, dryness, cracking, blistering, and pain. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
Inhalation:
Upper Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
May be absorbed following inhalation and cause target organ effects.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.
May be absorbed following ingestion and cause target organ effects.
Target Organ Effects:
Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness.
Contains a chemical or chemicals which can cause birth defects or other reproductive harm.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed.
Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and clean shoes before reuse.
Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.
If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get immediate medical attention.
SECTION 5: FIRE FIGHTING MEASURES
德国马哈
5.1 FLAMMABLE PROPERTIES
Autoignition temperature No Data Available
Flash Point Not Applicable
Flammable Limits - LEL Not Applicable
Flammable Limits - UEL Not Applicable
5.2 EXTINGUISHING MEDIA
Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head.
Unusual Fire and Explosion Hazards: Not applicable.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Refer to other sections of this MSDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. Call 3M-HELPS line (1-800-364-3577) for more information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Avoid contact with incompatible materials listed in the Reactivity Data Section. Collect as much of the spilled material as possible. Use appropriate and recommended personal protective equipment for the spill clean up. Use wet sweeping compound or water to avoid dusting and sweep up. Or collect spilled material using a vacuum cleaner such as the 3M Brand Model SV - 497 - AJM, with a High Efficiency Particulate Air (HEPA) filter. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and MSDS. Place in an approved metal container. Dispose of collected material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. For industrial or professional use only. Avoid eye contact with dust or airborne particles. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits. If ventilation is not adequate, use respiratory protection equipment. Avoid contact with water.
7.2 STORAGE
Store in a cool place. Store away from acids.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Use with appropriate local exhaust ventilation.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact.
The following eye protection(s) are recommended: Indirect Vented Goggles.
8.2.2 Skin Protection
Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
8.2.3 Respiratory Protection
Avoid breathing of dust. Avoid breathing of vapors.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with OSHA regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges. Consult the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
海量搜索N-Butyl glycidyl ether ACGIH TWA25 ppm
N-Butyl glycidyl ether OSHA TWA,
25 ppm
Vacated
N-Butyl glycidyl ether OSHA TWA50 ppm Table Z-1
Silica gel CMRG TWA 2 mg/m3
VAC Vacated PEL:Vacated Permissible Exposure Limits [PEL] are enforced as the OSHA PEL in some states. Check with your local regulatory agency.
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Odor, Color, Grade:Residual toluene odor
General Physical Form:Solid
Autoignition temperature No Data Available
Flash Point Not Applicable
Flammable Limits - LEL Not Applicable
Flammable Limits - UEL Not Applicable
Boiling point Not Applicable
Vapor Density No Data Available
Vapor Pressure No Data Available
Specific Gravity Approximately 1 [Ref Std: WATER=1]
pH Not Applicable
Melting point No Data Available
Solubility in Water No Data Available
Evaporation rate No Data Available
Volatile Organic Compounds Not Applicable
Percent volatile No Data Available
VOC Less H2O & Exempt Solvents Not Applicable
Viscosity Not Applicable
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: Amines; Alcohols; Water
Additional Information: Solvents
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products电负性
Substance Condition
人人微博
Aldehydes During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
CHEMICAL FATE INFORMATION
Not determined.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of completely cured (or polymerized) wastes in a sanitary landfill.
As a disposal alternative, incinerate in an industrial or commercial facility in the presence of a combustible material.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.
SECTION 14:TRANSPORT INFORMATION
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Dela
yed Hazard - Yes
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: OTHER INFORMATION
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议