Material Sciences 材料科学, 2020, 10(3), 162-172 Published Online March 2020 in Hans. /journal/ms /10.12677/ms.2020.103021
普朗格
文章引用: 费翔昱, 宫本奎, 孙玉梅, 冯锐, 王学江, 韩新俊. 电解铜箔变形的影响因素分析[J]. 材料科学, 2020, 10(3): 162-172. DOI: 10.12677/ms.2020.103021 主人遥控导尿管控制排尿Analysis of Influencing Factors of Electrolytic Copper Foil Warpage
Xiangyu Fei 1, Benkui Gong 1*, Yumei Sun 1, Rui Feng 1, Xuejiang Wang 2, Xinjun Han 3
1测井技术
School of Materials Science and Engineering, Shandong University of Technology, Zibo Shandong 2Shandong Jinbao Electronics Co. Ltd., Yantai Shandong 3Heze Guangyuan Copper Strip Co. Ltd., Heze Shandong
Received: Mar. 10th , 2020; accepted: Mar. 24th , 2020; published: Mar. 31st
, 2020
Abstract
The copper foil is widely used in many fields, such as copper clad laminates and current collectors of lithium ion batteries. In order to meet the requirements of lighter weight, higher capacity and higher energy density, the thickness of the copper foil will be reduced. However, in the actual production,
the thinner the copper foil is, the more likely it is to warp, also not conducive to positioning, cutting and coating. The influence factors of the deformation for copper foil are mainly the additives and electrolytic process parameters. The effects of influence factors on the copper foil were analyzed, and the main ideas for the production of electrolytic copper foil with low warping were proposed. Ke
ywords
乳距Copper Foil, Warpage, Influence Factors, Electrodeposition过氧化氢酶活性测定
电解铜箔变形的影响因素分析
费翔昱1，宫本奎1*，孙玉梅1，冯 锐1，王学江2，韩新俊3
1
山东理工大学材料科学与工程学院，山东 淄博 2山东金宝电子股份有限公司，山东 烟台 3菏泽广源铜带有限责任公司，山东 菏泽
收稿日期：2020年3月10日；录用日期：2020年3月24日；发布日期：2020年3月31日
摘 要
铜箔作为覆铜板和锂离子电池集流体材料大量使用。为满足轻量化、高容量和高能量密度等要求，需减*通讯作者。迪尼格尔
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议