SDI-5 Product Catalog 2005
SDI-5
This versatile dual-hose all pneumatic blasting system utilizes dry ice block, pellets, or nuggets to create a blast stream at blast pressures ranging from 40 to 250 psi (2.8 to 17.2 bar).
Fork lift tubes ensure balance and safety when moving and lifting
剩余价值学说
120 lb (54.5 kg) hopper
Variable dry ice pellet feed rate of 1 to 6 lbs (0.5 to 2.7 kg)
per minute
The dry ice blasting system includes one length each of dry ice blast and air hose, dry ice blasting applicator, and customer-specified nozzle.
Hose hanging devices keep hoses
safely stored on machine
永久模板2.4” (6 cm) Blast swath
Length 15.5” (39.4 cm)
Requires 85 SCFM (2.4 m3/min)Part #: 5E0971 - Aluminum
5E0972 - Stainless Steel
Flexible Nozzle
Length: 8" (20.32 cm)
Allows you to gently shape the barrel to get around obstructions that block your cleaning path
Due to its diameter, this nozzle is low-flow and may be less aggressive than larger diameter nozzles Part #: 5E0974 - 5/8” (1.6 cm) Diameter 5E0975 - 1/2” (1.3 cm) Diameter
Special stinger required.Part #: 5E0973
V ariable Flow Aggressive Nozzles
Full pressure barrel blast nozzles in Black ABS or Aluminum.
Nozzles have 1 1/4” (3.18 cm) OD. Minimum required flow rates range from 70 to 240 SCFM (2 to 6.8 m 3
/min) at 25 to 125 psi (1.7 to 8.5 bar).
First part number in series represents Black ABS, second number represents Aluminum
Extended Lengths available from 18” to 36” (45.7 cm to 91.4 cm) in Black ABS Part #: 5E0976-Length
Dual Hose Applicator
Lightweight, ergonomic design allows to blast comfort during long periods of times at blast pressures up to 125 psi (8.6 bar). Applicator can be used with dry ice pellets as well as sugar-sized granules produced from shaved block dry ice.
Part #: 2E0406 (sold only as part of blast/air hose assembly)
Applicator sold as part of blast/air hose assembly
Allows for a horizontal or vertical orientation
Slides easily and rotates around the extension tubes for optimal comfort and control
Fully adjustable. Loosen and lock by
rotating the handle.
Adjustable Tube Handle
Part #: 2E0289 - 1 3/16” (3cm) OD
Threaded Handle
Threads on to 5E0971 and 5E0972 nozzle.
Part #: 2E0245
Compressed Air Hose
• Used to carry pressurized air from air source to blast unit.• Includes swivel adapters.
• For each length of hose ordered, order one Whip Check! Part #: 2N0146-G1 - 25’ (7.6 m) Section 1” (2.5 cm) ID
Dual Hose Air and Blast Hose Assembly
Part #: 2E0406 - 15’ (4.6 m) section 125 psi (8.6 bar)windows 2003 server
Choosing a Stinger for your nozzle (using combination chart below):
• Determine your desired blast pressure (i.e.: if you wish to blast at 90 psi (6.2 bar), choose an LF-85, MF-85, or HF-85 stinger, each
with an operating range of 50 - 100 psi (3.4 - 6.9 bar).
• Based on the air flow rate your compressor can provide, choose a Low Flow, Medium Flow, or High Flow stinger. (For maximum cleaning aggression, choose the highest air flow available from your compressor).
•
Once you have selected a stinger, examine the chart below to determine which nozzle series (above) is appropriate for that stinger.
EXAMPLE: If you wish to blast at 90 psi (6.2 bar) and your compressor can supply 160 SCFM (4.5 m 3/min), you would choose an MF-85 stinger and a matching nozzle from Series 53.
Hoses
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议