2007-10-12
5011649801-DNS1 DeviceNet Communication Module (CME-DN01) Instruction Sheet
DeviceNet is a trademark of the Open DeviceNet Vendor Association, Inc.
Please thoroughly read and understand the following contents to ensure correct use before operation.
The content of this instruction sheet may be revised without prior notice. Please consult our distributors or download the most updated version at www.delta.tw/industrialautomation
A.
1. For RS-485 connection to VFD-E
2. Communication port for connecting DeviceNet network
3. Address selector
4. Baud rate selector
5. Three LED status indicators for monitor
B. Wiring and Settings
深圳潮汕商会会长吴开松
Refer to following diagram for details.
C. Mounting
Method
Step1 and step2 show how to mount this communication
module onto VFD-E. The dimension in the following is for
your reference.
STEP 1 STEP 2
圈疗D. Power
Supply
No external power is needed. Power is supplied via
RS-485 port that is connected to VFD-E. An 8 pins RJ-45
cable, which is packed together with this communication
module, is used to connect the RS-485 port between
VFD-E and this communication module for power. This
communication module will perform the function once it is
华丰煤矿吧connected. Refer to the following paragraph for LED
indications.
E. LEDs
Display
1. SP: Green LED means in normal condition, Red LED
means abnormal condition.
2. Module: Green blinking LED means no I/O data
transmission, Green steady LED means I/O data
transmission OK. Red LED blinking or steady LED
means module communication is abnormal.
3. Network: Green LED means DeviceNet
communication is normal, Red LED means abnormal.
Please download the auto EDS generator and user manual
at www.delta.tw/industrialautomation/
福泽谕吉
工控编程吧 gkbc8
DeviceNet 通讯模块(CME-DN01)说明书 DeviceNet 是ODVA(Open Device Vendor Association) 的注册商标。 请详细阅读下列说明后才使用本产品,以确保使用安全。
由于产品精益求精,当内容规格有所修正时,请洽询代理商或至台达网站
(www.delta.tw/ch/product/em/em_main.asp)下载最新版本。
A. 面板尺寸外观
1. 与VFD-E 系列连接的RS-485通讯接口 2. 连接DeviceNet 通讯网路接口
3. 地址的选择开关
4. 鲍率的选择开关
5. 三个状态显示灯以显示目前此通讯模块运行状态 B. 接线
1: Reserved 2: EV 5: SG+
6: Reserved 7: Reserved 8: Reserved
3: GND
4: SG-
竹胶合模板C. 安装方式科技狂澜
步骤1及步骤2显示如何将此通讯模块安装至VFD-E 变频器。附上尺寸供您参考。
尺寸
步骤 1
步骤 2
不需额外的电源。电源是由连接至变频器(VFD-E )的RS-485所提供。CME-DN01包装盒内的八支脚RJ-45通讯线是用来连接变频器的RS-485与CME-DN01以供应电源。一旦连接完成,CME-DN01即可操作。 E. 灯号指示
1. SP :绿灯表VFD 系列通讯正常,红灯表异常。
2. Module :绿灯闪烁表无I/O data 传输;绿灯则表有 I/O
data 传输。红灯闪烁及亮红灯则表此通讯模块模块异常。 3. Network :绿灯表DeviceNet 通讯正常,红灯表异常。
请至台达网站下载DeviceNet EDS file 产生器及其使用手册www.delta.tw/ch/product/em/em_main.asp
工控编程吧 gkbc8