聚合氯化铝的工艺设计

中文摘要    4
英文摘要    5
第1章 聚合氯化铝概述    6
1.1聚合氯化铝的物化性质    6
1.2质量标准    7
1.3聚合氯化铝的作用原理    7
1.4 应用特点    8
1.5应用范围    10
1.6 聚合氯化铝的制备原理及方法    11
1.7发展现状与前景    15
第2章 聚合氯化铝的工艺设计    17
2.1设计方法分析与拟定    17
2.1.1煤矸石概述                                    17
2.2.2煤矸石作为原料的合理性                        18
2.2生产原理及工艺特点    18
2.2.1生产原理    18
2.2.2工艺特点    19
2.3工艺参数和操作条件的确定    19
江苏科技大学学报2.4工艺流程说明    20
汇总表    23
附录    24
参考文献    26
禹州市二高无机絮凝剂聚合氯化铝(双环戊二烯PAC)生产工艺设计
摘要:
    聚合氯化铝是目前技术最成熟,市场销量最大的无机高分子絮凝剂。大量应用实践表明,在水处理中用聚合氯化铝替代传统铁、铝盐凝聚剂,显著地提高净水效能,减少投药量,降低处理成本,改善出水水质。
此次设计的题目是无机絮凝剂聚合氯化铝(PAC)生产工艺设计,我选用了煤矸石作为原料,在经过高温焙烧的煤矸石中加入盐酸进行酸化,可以将煤矸石中的氧化铝溶解出来,然后经过结晶,沸腾热解,加水聚合,干燥结晶成为PAC产品。
设计书里首先对聚合氯化铝进行了概述,接着对本设计的工艺设计的原料选择,工艺参数确定,流程设计进行了说明。
关键词:聚合氯化铝    制备方法    工艺说明
Inorganic Plocculant Poly Aluminium 聚乙二醇醚Chloride(PAC) Production 整形归来Design
谌容
Abstract
    Poly aluminum chloride is the most mature technology today, the market sales of the largest inorganic polymer flocculant. A large number of application practices shows that using poly aluminum chloride in water treatment alternatives to traditional iron, aluminum salt coagulants, significantly increase the efficiency of the clean water and reduce the o-phenylenediamine, reduce processing costs, improve water quality.
The topic of this design is inorganic flocculant poly aluminum chloride (PAC) production process design, I chose coal gangue as raw material, after adding hydrochloric acid acidification and high temperature calcined coal gangue can be came out of the coal gangue aluminum oxide dissolved, then after crystallization, boiling paralysis, aggregation of water, dry crystallization become PAC products.
Design document in the first of poly aluminum chloride were summarized, then the process design of material selection of our design, process parameters, process design.
keywords:PAC, preparation method thereof, and production technology
第一章 聚合氯化铝概述
在水处理领域中,絮凝法净化水是最古老的固液分离方法之一,由于其适用性广、工艺简单、处理成本低等特点,絮凝法目前仍广泛应用于饮用水、生活污水和工业废水处理中。
聚合氯化铝(PAC)是一种优良的无机高分子絮凝剂,它首先在日本研制成功并与20世纪60年代投入工业化生产,是目前技术最为成熟,市场销量最大的絮凝剂。PAC使用时具有絮体形成快、沉淀性能好,水中碱度消耗少,特别是对水温、pH值、浊度和有机物含量变化适应性强等优点。我国从上世纪70年代开始,已对聚合氯化铝进行了研发,近年来随着实验室研究的深入,工业生产得到了快速的发展。以下将会对聚合硫酸铁的物化性质,制备原理和方法,以及研究应用现状和发展趋势等做一些简要的介绍。

本文发布于:2024-09-22 18:11:42,感谢您对本站的认可!

本文链接:https://www.17tex.com/xueshu/342236.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:聚合   工艺   处理   设计   煤矸石
留言与评论(共有 0 条评论)
   
验证码:
Copyright ©2019-2024 Comsenz Inc.Powered by © 易纺专利技术学习网 豫ICP备2022007602号 豫公网安备41160202000603 站长QQ:729038198 关于我们 投诉建议