一种光谱型椭偏仪的校准方法

一种光谱型椭偏仪的校准方法科技管理研究
作者：韩志国西岳电子李锁印赵琳冯亚南梁法国
来源：《中国测试》2017年第12期

摘要：针对光谱型椭偏仪校准结果受测量模型影响大的问题进行研究，提出一种不受测量模型影响的校准方法，即通过校准椭偏角实现光谱型椭偏仪的校准。依据椭偏仪测量原理，通过仿真分析确定实现较大范围内椭偏角校准所需标准样片的薄膜厚度量值，并采用半导体热氧化工艺制备出性能稳定的膜厚标准样片。使用标准样片对型号为M-2000XF的光谱型椭偏仪的椭偏角进行校准，样片厚度为2，50，500 nm对应的椭偏角偏差分别在±0.6°，±1.5°，±2°以内，该偏差对薄膜厚度的影响不超过±0.5 nm。经实验表明：该方法不受椭偏仪测量模型的影响，可有效解决光谱型椭偏仪的校准问题。

关键词：光谱型椭偏仪；椭偏角校准；膜厚标准样片；仿真南京东方卫报

文献标志码：A 文章编号：1674-5124张宏涛体操（2017）12-0001-06

Abstract： In order to solve the problem that spectroscopic ellipsometry calibration res

ults is effected by measurement model， a calibration method without being influenced by measurement model is proposed to calibrate spectroscopic ellipsometer by calibrating the elliptic angle. Standard sample film thickness required by calibration of elliptic angle is determined in wide range via simulation analysis based on the ellipsometry principle， and film thickness standard sample with stable performance is fabricated by using semiconductor thermal oxidation process. When calibrating the elliptic angle of M-2000XF spectral ellipsometer by standard samples， the deviations of elliptic angle corresponding to the thickness of 2土婆婆pk洋媳妇，50，500 nm are within ±0.6°，±1.5°，tcl电话机维修±2°， and result in the influence on the thickness of film no more than ±0.5 nm. The test shows that this method is not affected by the ellipsometry measurement model， and it can effectively solve the calibration problem of spectroscopic ellipsometer.

本文发布于:2024-09-21 16:22:31，感谢您对本站的认可！

本文链接：https://www.17tex.com/xueshu/330413.html

上一篇：椭偏仪实验报告电子版

下一篇：椭偏仪测折射率和薄膜厚度原理

标签：校准椭偏仪样片测量影响偏角

留言与评论（共有 0 条评论）