Wl command
Contents
• 1 Setup
• 2 Usage
• 3 Common Tasks
o 3.1 Toggle radio on/off, restart, etc • 4 Alphabetical list of commands
o 4.1 aciargs
o 4.2 addwep
o 4.3 aes
o 4.4 antdiv
o 4.5 ap
o 4.6 assoc
o 4.7 assoclist
o 4.8 atten
o 4.9 authe_sta_list
o 4.10 autho_sta_list
o 4.11 authorize
o 4.12 band
o 4.13 bands
o 4.14 bssid
o 4.15 cap
o 4.16 channel
o 4.17 channel_qa
o 4.18 channel_qa_start
o 4.19 clk
o 4.20 cmds
o 4.21 country
o 4.22 constraint
o 4.23 crsuprs
o 4.24 csa
o 4.25 cwmin
o 4.26 cwmax
o 4.27 disassoc
o 4.28 dtim
混凝土侧压力o 4.29 dump
o 4.30 deauthenticate
o 4.31 deauthorize
o 4.32 eap
o 4.33 chanlist
o 4.34 channels
o 4.35 channels_in_country
o 4.36 curpower
o 4.37 evm
o 4.38 frameburst
o 4.39 fasttimer
o 4.40 frag
o 4.41 fqacurcy
o 4.42 glacialtimer
o 4.43 gmode
o 4.44 gmode_protection
o 4.45 gmode_protection_control o 4.46 gmode_protection_cts
o 4.47 gmode_protection_override o 4.48 ignore_bcns
o 4.49 int
o 4.50 interference
o 4.51 infra
o 4.52 isup
o 4.53 join
o 4.54 keys
o 4.55 lazywds
o 4.56 lbt
o 4.57 legacy_erp
o 4.58 locale金刚烷胺
o 4.59 lrl
o 4.60 mac
o 4.61 macmode
o 4.62 macreg
o 4.63 measure_req
o 4.64 monitor
o 4.65 mrate
o 4.66 msglevel
o 4.67 noise
o 4.68 nvdump
o 4.69 nvget
o 4.70 nvset
o 4.71 passive
o 4.72 phylist
o 4.73 phyreg
o 4.74 radioreg
o 4.75 phytype
o 4.76 pktcnt
o 4.77 plcphdr
o 4.78 PM
o 4.80 prb_resp_timeout
o 4.81 primary_key
o 4.82 promisc
帆板控制系统o 4.83 pwr_percent
o 4.84 quiet
o 4.85 radar
o 4.86 radio
o 4.87 rate
o 4.88 ratedump
o 4.89 rateparam
o 4.90 rateset
o 4.91 reboot
o 4.92 revinfo
o 4.93 regulatory
o 4.94 roam_delta
o 4.95 rm_rep
o 4.96 rm_req
o 4.97 rmwep
o 4.98 roam_scan_period
o 4.99 roam_trigger
o 4.100 rssi
o 4.101 rssidump
o 4.102 rts
o 4.103 scan_channel_time
o 4.104 scan_home_time
o 4.105 scan_nprobes
o 4.106 scan_passive_time
o 4.107 scan_unassoc_time
o 4.108 scanresults
o 4.109 scansuppress
o 4.110 scb_timeout
o 4.111 scbdump
o 4.112 scan
o 4.113 set_pmk
o 4.114 shmem
o 4.115 shortslot
长链二元酸o 4.116 shortslot_override o 4.117 shortslot_restrict
o 4.118 slowtimer
o 4.119 spect
o 4.120 srdump
o 4.121 srl
o 4.122 ssid
o 4.123 sta_info
o 4.124 status
o 4.125 suprates
o 4.126 tkip
o 4.127 tkip_countermeasures o 4.128 tsc
o 4.129 tssi
o 4.130 txant
o 4.131 txpathpwr
o 4.132 txpwr
o 4.133 txpwr1
o 4.134 txpwrlimit
o 4.135 ucflags
o 4.136 upgrade
o 4.137 ver
o 4.138 wake
o 4.139 wds
o 4.140 wds_remote_mac
o 4.141 wds_wpa_role
o 4.142 wds_wpa_role_old
o 4.143 wep
o 4.144 wepstatus
o 4.145 wet
o 4.146 wsec
o 4.147 wsec_test
o 4.148 wme
o 4.149 wsec_restrict
o 4.150 wpa_auth
• 5 External links
Usage
Most of the wireless options can be accessed using the program "wl" via the console window. This program has many more options than our WRT is able to process. Some can only be used in Client Mode and others only in Access Point (AP) Mode.
Usage: wl [-a|i <adapter>] [-hu] <command> [arguments]
-a, -i adapter name or number
-h, -u this message
Examples:
~ # wl ssid
~ # wl txpwr1 -o -m 35
Note For NEWD-2 builds, you must specify the interface when performing a command.
Example:
~ # wl -i eth1 status
If you have multiple radios, then each one will have it's own interface, i.e eth2, eth3
Common Tasks
Toggle radio on/off, restart, etc
•~ # wl up
reinitialize adapter and mark as up
•~ # wl down
reset adapter and mark as down
•~ # wl out
mark adapter down but do not reset hardware.
•~ # wl radio
toggle radio on/off
~ # wl radio
radio is on (WL_RADIO_SW_DISABLE 0 WL_RADIO_HW_DISABLE 0) ~ # wl radio off
~ # wl radio
radio is off (WL_RADIO_SW_DISABLE 1 WL_RADIO_HW_DISABLE 0) ~ # wl radio on
•~ # wl restart
restart the driver. (Driver must already be down)
Alphabetical list of commands
aciargs
Get/Set various aci tuning parameters. Choices are:
enter: CRS glitch trigger level to start detecting ACI
exit: CRS glitch trigger level to exit ACI mode