DIGITAL GAP>###2012-05-18>###技术与应用
波罗的海三国.H., Stresses and displacements on the boundaries of circular rings diametrically loaded, J. Appl, [4] Batista ,M. and Usenik, Stresses in a circular ring under two forces acting along a diameter, J. Strain analysis, 1996,31 (1), [5] Ma,D., `Elastic stress solution for a ring subjected to es. & Piping, 1990, [6] Ma,D., `Elastic stress solution for a ring subjected to loaded rings , which were put forward in the past by a lot of authors, are presented in these paper. In the future design of rings and their force sensors, the suitable computing formulas are chosen. It is significant for instruction to design rings and their force sensors. In addition , the positions of maximum circumferential stress ,where the strain strips should be stick, are recommended, when the force ring sensors are studied. Keywords :force sensors; loaded rings; stress calculations
作者简介:
田义,河北工业大学电子科学与技术专业。研究方向:半导体测量,传感器与氧敏器件,信息薄膜制备 工业大学北辰校区(300401E-mail:******************** :138****3884河北工业大学教授、博士生导师,从事半导体测量,传感器与氧敏器件,信息薄膜制备与研究
本文编辑:霍莉 读者服务卡编号009□
图7 受铅直径向集中力圆环,其内 图8 受铅直径向集中力圆环,其内外外径之比α=0.5时剪切应力分布图 径之比α=0.7时的剪切应力分布图
图9 α0=0.7的1/4圆环中计算的等最 图10 α0=0.5的1/4圆环中等最大切
大剪切应力轮廓线,应力步长0.6RW F π2 应力轮廓线,应力步长0.2
RW F
π2