CP-118U, CP-138U Series Serial Boards Quick Installation Guide
Sixth Edition, April 2009
1.Overview
The CP-118U and CP-138U are Universal PCI multiport serial boards that are designed for POS and ATM applications and for industrial automation systems. Each board has a128-byte Tx/Rx FIFO, on-chip hardware and software flow control, and supports data transmission speeds of up to 921.6 Kbps.
CP-118U: 8-port RS-232/422/485 Universal PCI serial board, 0 to 55°C operating temperature.
CP-138U: 8-port RS-422/485 Universal PCI serial board, 0 to 55°C operating temperature.
CP-118U-T: 8-port RS-232/422/485 Universal PCI serial board, -40 to 85°C operating temperature.
横隔板CP-138U-T: 8-port RS-422/485 Universal PCI serial board, -40 to 85°C operating temperature.
2.Package Checklist
Before installing the board, verify that the package contains the following items:
y CP-118U or CP-138U Universal PCI board
y Document and Software CD-ROMstudioclassroom
y Quick Installation Guide
y5-year Product Warranty Statement
Please notify your sales representative if any of the above items are missing or damaged.
3.Hardware Installation Procedure
The serial board MUST be installed in the PC before you install the driver.
STEP 1: Power off the PC. STEP 2: On the serial board, select the serial interface using the DIP
switches as shown below:
Mode S1 S2 S3*
RS-232* ---
-
--
ON
RS-422 ---
ON OFF
4-wire RS-485 ON OFF OFF
2-wire RS-485 OFF OFF OFF
*CP-118U only
STEP 3: Plug the board firmly into an open PCI or PCI-X slot on the PC.
STEP 4: Use the screw to secure the control board into place.
STEP 5: Attach the connection cables.
STEP 6: Power on the PC. The BIOS will automatically set the IRQ and
I/O address.
4.Software Installation
Do NOT install the driver until you have physically installed the board.
Please refer to the previous section for instructions on installing the board
in your PC. Refer to the Universal PCI User’s Manual for detailed
instructions on installing the drivers for this board.
Windows Vista (32-bit/64-bit)
1.After powering on your PC, Windows Vista will automatically detect
the serial board.
2.Insert the Document and Software CD in your CD-ROM drive.
3.Select Locate and install driver software (recommended).
4.When you receive a message stating “Windows needs your
permission to continue”, click Next to continue.
5.Select “I don’t have the disc, show me other options”.
6.Select “Browse my computer for driver software (advanced)”.
7.For 32-bit (x86) systems, select the
\CP-118U Series\Software\Windows Vista\x86 folder on the CD.
For 64-bit (x64) systems, select the
\CP-118U Series\Software\Windows Vista\x64 folder on the CD.
Click Next to continue.
8.If you see a warning that the software has not passed Windows Logo
testing, select Install this driver software anyway.
9.After the driver software has been installed, the installation wizard
will guide you through the port installation, starting with port 0.
10.To verify successful installation, use Windows Device Manager and
check under Multi-port serial adapters and Ports (COM & LPT)
for any special marks, such as a question mark or exclamation point.
Windows 2003 and XP (32-bit/64-bit)
1.After powering on your PC, Windows 2003/XP will automatically
detect the serial board.
2.Insert the Document and Software CD in your CD-ROM drive.
3.Select Install from a list or specific location (Advanced).
4.Select Search for the best driver in these locations, Include this
location in the search, and click Browse.
5.For 32-bit (x86) systems, select the
\CP-118U Series\Software\Windows XP_2003\x86 folder on the
CD. For 64-bit (x64) systems,select the
\CP-118U Series\Software\Windows XP_2003\x64 folder on the
CD. Click Next to continue.
6.If you see a warning that the software has not passed Windows Logo
testing, select Continue Anyway.
7.After the driver software has been installed, the installation wizard
will guide you through the port installation, starting with port 0.
8.To verify successful installation, use Windows Device Manager and
check under Multi-port serial adapters and Ports (COM & LPT)
for any special marks, such as a question mark or exclamation point.
Windows 2000
1.After powering on your PC, Windows 2000 will automatically detect
the serial board.
2.Insert the Document and Software CD in your CD-ROM drive.
3.Select Search for a suitable driver for my device (recommended).
4.In Optional search location, select specify a location. Select the
\CP-118U Series\Software\Windows 2K folder on the CD and click
OK to continue.
5.If you see a warning that the software has not passed Windows Logo
testing, select Continue Anyway.
6.After the driver software has been installed, the installation wizard
will guide you through the port installation, starting with port 0. Be
sure to install the software from the
\CP-118U Series\Software\Windows 2K folder on the CD.
7.To verify successful installation, use Windows Device Manager and
check under Multi-port serial adapters and Ports (COM & LPT)
for any special marks, such as a question mark or exclamation point.
P/N: 1802001182025
— 1 — — 2 — — 3 —
Linux (32-bit/64-bit)
Ensure that you are logged into the machine with superuser (root) privileges. Insert the Moxa driver CD-ROM into the CD-ROM drive.
If necessary, use the mkdir command to create a mount point for the
CD-ROM. The following command creates a mount point in the directory /cdrom; you can mount the CD-ROM at any location in the machine's local file system.
mkdir /cdrom
The commands in the steps below assume the CD-ROM is mounted at
/cdrom. If you mount the CD-ROM at a different location, use that location when issuing commands.
Mount the CD-ROM drive by entering the following command:
# mount -t iso9660 -o ro /dev/cdrom /cdrom
1.Execute the following commands from the Linux prompt:
#mount /dev/cdrom /mnt/cdrom
#cd /说法网
#mkdir moxa
#cd moxa
#cp /mnt/cdrom/<driver directory>/ .
#tar
#cd mxser
#make clean; make install
#cd /moxa/mxser/driver医疗机构
病历管理规定 #./msmknod
#modprobe mxser
2.Use the Moxa diagnostic utility to verify the driver status:
#cd /moxa/mxser/utility/diag
#./msdiag
3.Use the Moxa terminal utility to test the TTY ports:
#cd /moxa/mxser/utility/term
#./msterm #./msterm
5.Pin Assignments and Cable Wiring
The CP-118U and CP-138U each have a female DB62 connector on the board. Cables with different connectors are available to help you connect your device to the board.
Male DB9 (CBL-M62M9x8-100, Opt8-M9)
Pin RS-232*
RS-422
4-wire RS-485
2-wire RS-485
1DCD TxD-(A) ---
2RxD TxD+(B) ---
3TxD RxD+(B)
Data+(B)
4DTR RxD-(A) Data-(A)
5GND GND GND
6DSR --- ---
7RTS --- ---
8CTS --- ---
*CP-118U only
Male DB25 (CBL-M62M25x8-100, Opt8B)
Pin RS-232*
RS-422
4-wire RS-485
2-wire RS-485
2TxD RxD+(B) Data+(B)
3RxD TxD+(B) ---
4RTS --- ---
5CTS --- ---
常压渣油
6DSR --- ---
7GND GND GND
8DCD TxD-(A) ---
20DTR RxD-(A) Data-(A)
*CP-118U only
Female DB25 (Opt8A/S)
Pin RS-232*
RS-422
4-wire RS-485
2-wire RS-485
2RxD TxD+(B)
---
3TxD RxD+(B) Data+(B)
4CTS --- ---
5RTS --- ---
6DTR RxD-(A) Data-(A)
7GND GND GND
8DCD TxD-(A) ---
20DSR --- ---
*CP-118U only
Pin RS-232*
RS-422
4-wire RS-485
2-wire RS-485
1DSR --- ---
2RTS --- ---
3GND GND GND
4TxD RxD+(B) Data+(B)
5RxD TxD+(B) ---
6DCD TxD-(A) ---
7CTS --- ---
8DTR RxD-(A) Data-(A)
*CP-118U only
Click here for online support:
The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872)
Europe: +49-89-3 70 03 99-0
Asia-Pacific: +886-2-8919-1230
China: +86-21-5258-9955 (toll-free: 800-820-5036)
© 2009 Moxa Inc. All rights reserved.
Reproduction without permission is prohibited.
—
4 — — 5 — — 6 —
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议