gpononustiabosa

Features
● Single fiber pigtail type bi-directional transmission design for digital communication
● Asymmetric 2.5Gbps downstream and 1.25Gbps upstream data link transmission
● Laser welded transmitter and epoxy cured receiver package
● Integrated micro-optics WDM filters for dual wavelength Tx/Rx operation at 1310/1490nm ● 1310n
m InGaAsP/InP MQW DFB laser diode transmission with high bandwidth InGaAs monitor photodiode
● 1490nm digital PIN photodiode with integrated 2.5Gbps, 3.3V continuous mode Super transimpedance-amplifier
● High optical isolation from external source and low optical cross-talk from internal source
● -5︒C to +75︒C commercial temperature and -40︒C to +85︒C industrial operating temperature
available with excellent temperature dependent power tracking error
Standard
● Compliant with ITU-T G984.5 telecommunication protocol
● Compliant with T elcordia GR-468 reliability test criterion
● Compliant with T elcordia GR-326 connector qualification standard
● Compliant with RoHS6 standard
Description This BOSA is a high performance optical  sub-assembly in single fiber by using 1310nm transmitter and 1490nm receiver. The transmitter section uses a multiple quantum well 1310nm DFB laser supporting burst-mode operation. The receiver section uses a TO-can built in a long wavelength PIN diode and a 2.5Gbps Super transimpedance amplifier.  Applications ● GPON BOB ONU optical modem, class B+ ● GPON ONU transceiver ● FTTH Bi-directional play
GPON ONU STIA BOSA
生物信息学软件BA-33 series T1.25G/R2.5G
1. Absolute Maximum Ratings
Item Unit Min Max Note Forward Current for LD mA -- 120
Reverse Voltage for LD V --    2
Forward Current for MPD mA --    2
Reverse Voltage for MPD V -- 15
Optical Power for Rx dBm    5 --
APD Forward Current mA --    2
APD Reverse Current mA --    3
APD Reverse Voltage V Vbr
TIA Supply Voltage V -0.4    4
Operating T emp ︒C -5 75
浙江树人大学学报
Storage T emperature ︒C -40 85
Storage Relative Humidity % -- 85
Solder Reflow T emperature ︒C -- 260 (*1)
(*1): For soldering by iron and 10 seconds on leads
抗原表位2. Transmitter Electro-Optical Characteristics (T C=25°C, CW)
Item Symbol T est Condition Min. Typ. Max. Unit
Tc=25︒C -- 10 15 mA Threshold Current Ith
Tc=-5~75︒C    1 -- 50 mA
onsIf=Ith+20mA, T c=25︒C    1.6 --    3.5 mW Optical Output Power (*2) Pf
If=Ith+20mA, T c=-5~ 75︒C    1.0 -- -- mW
If=Ith+20mA, T c=25︒C 0.08 -- 0.175 mW/mA Slope Efficiency η
If=Ith+20mA, T c=-5~ 75︒C 0.05 -- -- mW/mA Forward Current If Pf=2.5mW, T c=-5~75︒C -- -- 70 mA Forward Voltage Vf If=Ith+20mA --    1.1    1.5 V Rise/Fall Time τr/τf 20%~80% -- 0.1 0.2 ns
If=Ith+20mA, T c=25︒C 1300 1310 1320 nm Central Wavelength λc
If=Ith+20mA, T c=-5~75︒C 1290 -- 1330 nm
Spectrum Width (RMS) ∆λ If=Ith+20mA, T c=-5~75︒C -- 0.32    1.0 nm Side Mode Suppression Ratio SMSR If=Ith+20mA, T c=-5~75︒C 30 -- -- dB Monitor Current Im If=Ith+20mA, T c=-5~75︒C 100 -- 1000 μA Monitor Dark Current Id Vrp=5V -- -- 100 nA Monitor Capacitance    C Vrp=5V, f=1MHz    4 -- 15 pF Tracking Error (*3) TE T c=-5~ 75︒C -1.5 --    1.5 dB (*2): Launched into 9/125μm SMF
(*3): ∆Pf =10x log (Pf (T c) /Pf (25︒C)), Im hold(@Pf=2mW, 25︒C)
3. Receiver Electro-Optical Characteristics (T C=25°C, Vcc=3.3V)
Item Symbol T est Condition Min. Typ. Max. Unit Supply Voltage Vcc    3.0    3.3    3.6 V Supply Current Icc No loads -- 20 24 mA Operating Wavelength λ T c=-5~75︒C 1480 -- 1500 nm
Sensitivity Sen    2.5Gbps, PRBS23, ER=10dB,
库存管理系统
BER=10E-10, RL=50Ω, NRZ -- -- -29.5 dBm
Overload OL -7.0 -- -- dBm Output Impedance Rout Single end 40 -- 60 Ω Differential Output Voltage Vpp 100Ω differential load, 2.5Gbps -- -- 1000 mV Dark Current Id Vcc=3.3V, no input -- -- 150 nA
Optical Return Loss ORL1310 1310nm -- -- -15 dB ORL1490 1490nm -- -- -20 dB
Optical Crosstalk X-talk 1310nm/1490nm -- -- -47 dB
Optical Isolation from External Source ISO1
λ=1441~1450nm
25 -- -- dB
λ=1530~1539nm
ISO2
λ=1260~1440nm
35 -- -- dB
λ=1540~1625nm
4. Dimension Outline
5. Other Characteristics
Parameter Symbol Min. Typ. Max. Unit Note Mode Field Diameter 8 9 10 μm
Gladding Diameter 123 125 127 μm
Fiber Macro bend Loss 0.05 dB Radius 16mm Optical Connector Insertion Loss -- -- 0.4 dB SC/UPC connector Fiber Bending Radius 25 -- -- mm
自然科学基金Fiber Diameter 0.8 0.9    1.0 mm
Fiber Length 210 -- 250 mm L
Fiber Operation T emperature 75 ----︒C
Pull Force on LD Assembly 30 ----Kgw
Pull Force on APD Assembly 15 ----Kgw
Shear Strength on XY Welding 30 ----Kgw
T ension Force on Fiber Pigtail 10 -- -- N
(*4): Connector fiber end face accord with IPC-8497-1

本文发布于:2024-09-22 05:32:18,感谢您对本站的认可!

本文链接:https://www.17tex.com/xueshu/158936.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:软件   浙江   表位   管理系统   生物   学报
留言与评论(共有 0 条评论)
   
验证码:
Copyright ©2019-2024 Comsenz Inc.Powered by © 易纺专利技术学习网 豫ICP备2022007602号 豫公网安备41160202000603 站长QQ:729038198 关于我们 投诉建议