CHIMEI INNO L U X DISPLAY CORPORATION
LCD MODULE
SPECIFICATION
金钩月饼Customer:
Model Name: AT043TN25 V.2
SPEC NO.: A043-25-TT-21
Date: 2010/05/14
Version: 01
■Preliminary Specification
□Final Specification
For Customer’s Acceptance
Approved by Comment
Approved by Reviewed by Prepared by
Joe Lin
2010/05/27
James Yu
Charlie Chou
2010/05/27
David Lee
2010/05/25
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
氢化锂CHIMEI INNO L U X
InnoLux copyright 2004
All rights reserved,
Copying forbidden.
Record of Revision
Version Revise Date Page Content Pre-spec .01 2010/05/14 Initial Release.
达尔富尔
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
CHIMEI INNO L U X
Contents
1. General Specifications (1)
2. Pin Assignment (2)
2.1. T FT LCD Panel Driving Section (2)
3. Operation Specifications (4)
3.1. A bsolute Maximum Ratings (4)
3.2. T ypical operation conditions (5)
3.3 Backlight Driving Conditions (5)
3.4. P ower Sequence (6)
3.5. T iming Characteristics (7)
3.5.1. Timing Conditions (7)
帝国主义侵华3.5.2.Timing Diagram (8)
4. Optical Specifications ................................................................................. (9)
5. Reliability Test Items (13)
6. General Precautions (14)
7.1. Safety (14)
7.2. Handling (14)
7.3. Static Electricity (14)
7.4. Storage (14)
7.5. Cleaning (14)
7. Mechanical Drawing (15)
9. Package Drawing (16)
9.1. Packaging Material Table (16)
9.2. Packaging Quantity (16)
9.3. Packaging Drawing (17)
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
1. General Specifications
No. Item Specification Remark
1 LCD size 4.3 inch(Diagonal)
2 Driver element a-Si TFT active matrix
3 Resolution 480 × 3 (RGB) × 272
4 Display mode Normally White, Transmissive
5 Dot pitch 0.066(W) × 0.198(H) mm
6 Active area 95.04(W) × 53.856(H) mm
7 Module size 105.5(W) × 67.2(H) ×2.9(D) mm Note 1
8 Surface treatment Anti-Glare
9 Color arrangement RGB-stripe
10 Interface Digital
11 Backlight Power consumption TBD W(Typ.)
12 Panel Power consumption TBD W (Typ.)察哈尔
13 Weight TBD (Typ.)
Note 1: Refer to Mechanical Drawing.
2. Pin Assignment
2.1. T FT LCD Panel Driving Section
FPC Connector is used for the module electronics interface. The recommended model is “FH19SC-40S-0.5SH” manufactured by HIROSE.
Pin No. Symbol I/O Function Remark上皮细胞
1 V LED-P Power for LED backlight cathode
2 V LED+P Power for LED backlight anode
3 GND P Power ground
4 V DD P Power voltage
5 R0 I Red data (LSB)
6 R1 I Red data
7 R2 I Red data
8 R3 I Red data
9 R4 I Red data
10 R5 I Red data
11 R6 I Red data
12 R7 I Red data (MSB)
13 G0 I Green data (LSB)
14 G1 I Green data
15 G2 I Green data
16 G3 I Green data
17 G4 I Green data
18 G5 I Green data
19 G6 I Green data
20 G7 I Green data (MSB)
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议