INNO L U X DISPLAY CORPORATION
LCD MODULE
SPECIFICATION
Customer:
Model Name: AT056TN52 V.3
SPEC NO.: A056-52-TT-31
Date: 2009/03/25
Version: 01
■Preliminary Specification
□Final Specification
For Customer’s Acceptance
Approved by Comment
Approved by Reviewed by Prepared by
Joe Lin 2009/03/31
Jack Huang
Charlie Chou
James Yu
2009/03/30
David Lee
2009/03/26
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
InnoLux copyright 2004
All rights reserved,
Copying forbidden.
化学在生活中的
应用Record of Revision
Version Revise Date Page Content
Pre-spec.01 2009/03/25 Initial Release
Contents:
1.General Specifications (1)
2.Pin Assignment (2)
3.Operation Specifications (5)
3.1.Absolute Maximum Ratings (5)
3.2.Typical Operation Conditions (6)
3.2.1 Typical Operation Conditions (6)
3.2.2 Current Consumption (6)
3.2.3 Backlight Driving Conditions (7)
3.3.Power Sequence (8)
3.4.Timing Characteristics (9)
3.4.1.Timing Conditions (9)
3.4.2.Timing Diagram (11)
4.Optical Specifications (14)
5.Reliability Test (18)
6.General Precautions (19)
6.1.Safety (19)
6.2.Handling (19)
6.3.Static Electricity (19)
6.4.Storage (19)
6.5.Cleaning (19)
7.Mechanical Drawing (20)
8.Package Drawing (21)
8.1.Packaging Material Table (21)
8.2.Packaging Quantity (21)
8.3.Packaging Drawing (22)
Page : 1/22 1.General Specifications
No. Item Specification Remark
1 LCD size 5.6 inch(Diagonal)
2 Driver element a-Si TFT active matrix
3 Resolution 640 × (RGB) × 480
4 Display mode Normally White, Transmissive
5 Dot pitch 0.0588(W) × 0.1764(H) mm村长
轶事 6 Active area 112.896 (W) × 84.672(H) mm
关天
经济区发展
规划7 Module size 126.5(W) × 100(H) × 5.7(D) mm Note 1
8 Surface treatment Anti-Glare
9 Color arrangement RGB-stripe
10 Interface Digital
11 Backlight Power consumption0.930W
12 Panel Power consumption 117mW
13 Weight 132g
Note 1: Refer to Mechanical Drawing.
Page : 2/22 2.Pin Assignment
勾股数
TFT LCD Panel Driving Section
FPC connector is used for the module electronics interface. The recommended model is
FH12S-50S-0.5SH manufactured by HiRose.
Pin No.Symbol I/O Function Remark
1 V LED+P Power for LED backlight anode
2 V LED+P Power for LED backlight anode
3 V LED-P Power for LED backlight cathode
4 V LED-P Power for LED backlight cathode
5 GND P Power ground
6 V COM I V COM input
7 V CC P Digital power supply(+3.3V)
8 MODE I DE or HV mode control Note 1骷髅党
9 DE I Data Enable
10 VS I Vsync signal input
11 HS I Hsync signal input
12 B7 I Blue data input (MSB)
13 B6 I Blue data input
14 B5 I Blue data input
15 B4 I Blue data input
16 B3 I Blue data input
17 B2 I Blue data input
18 B1 I Blue data input
19 B0 I Blue data input(LSB)
20 G7 I Green data input(MSB)
21 G6 I Green data input
22 G5 I Green data input
23 G4 I Green data input
24 G3 I Green data input
25 G2 I Green data input
26 G1 I Green data input
27 G0 I Green data input(LSB)
28 R7 I Red data input(MSB)peg6000
29 R6 I Red data input
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议