YR100F-2-5
PHYSICAL DIMENSIONS:
Probe dimensions and position of active zone for the Single-Axis Magnetic Field Transducer
DESCRIPTION
The Model YR100F-2-5 is a single-axis, high accuracy,high linearity, high stability magnetic field to analog voltage transducer. It is particularly appropriate for mapping the magnetic field in the range to 2 Tesla. The magnetic field sensor’s head contains a high quality Hall element. The very thin sensor’s head design allows mounting in the air gap of generators and electrical motors.
A novel sensor chip in the probe entirely eliminates influences from DC magnetic field components other than the one measured (Y-axis), so that even for strong non-uniform fields no planar Hall effect leads to errors in the output voltage. The transducer consists of a sensor’s head with integral flexible cable of 5 meters connected to a conditioning unit.
Single Axis数据波
Magnetic Field Transducer
APPLICATIONS
G On-line Magnetic Field Measurement in large turbogenerators, hydrogenerators and electrical motors
G Effective diagnostic of generator magnetic field.Detection of shorted pole coils.
南山114G
Measurement of magnetic field distribution.
FEATURES G Single axis measurement G Excellent accuracy
G Up to +/-2 Tesla linear; max +/-4 Tesla
G Easy to install on stator wall without removing the rotor poles
G Temperature compensated
G EMC tested to IEC and ENV norms G Immune to deposits and vibrations
G
Small size and flat design for electrical machines安丰市场 air gap installation.
MC-monitoring SA
YR100F- 2- 5
LOCAL REPRESENTATIVE:
Electrical
Output signal for channel Y Max. magnetic field ± 4 T Linear magnetic field range: ± 2 T (full scale)
Output voltage at full-scale ±10.000V, differential Sensitivity to magnetic field 5 V/T ( 0.5mV/G )Tolerances of sensitivity (B = 1T)± 1 %Non Linearity of output (B <= 1T)< 0.5 %
(B <= 2T) < 1 %
Long term instability < 1 % over 10 years Temp. coefficient of sensitivity (T= 40 ± 30°C) < 300 ppm /°C Offset at B = 0T < ± 3 mV Temp. coefficient of offset < 0.5 mV/°C Output noise and ripple (peak)0.01..100Hz < 0.06 mV
(0.12 G)
Output resistance < 10 Ohm, s. c. proof Typical frequency response (1% error)>500 Hz Bandwidth (-3dB)1kHz
Environmental
Temperature (operating)40°C +/- 30°C (storage)-20° to 85°C Electromagnetic
一棵树上的两种果实RF conducted disturbances IEC 801-6Draft ENV 50141Radiated electromagnetic field ENV 50140Pulse modulated electromagn.field ENV 50140Electrical fast transient burst IEC 1000-4 4,
EN 61000-4-4
Surge EC 1000-4-5
Mechanical
Coordinates: X Y Z
Field sensitive volume (FSV) 0.25 x 0.20 x 0.25 mm Sensitive Point (the center of FSV) 2,4, 0.6, -1.0 mm Angular accuracy of the axes ± 1° wrt module H Probe total outside dimensions 5,5 x 3,5 x 70 mm Probe-to-Electronics cable permanently connected
length 5 m
Connector CoS DIN KFV70, 7 pole, 60°.
(Mating Plug, SV70)
field signal Y+, Y- Pins 4 and 3 respectively
signal common Pin 7
Connector CoP DIN SFV50, 5 pole.
(Mating Plug, KV50)
power, +12V Pin 3power, -12V Pin 1power common Pin 2Conditioning electronics
high mechanical strength,
electrically shielded aluminum case
95 W x 120 L x 37 H mm
with mounting provision.
Power
Voltage 12V, -12V nominal, ±10%.
Current consumption ca. 50mA
Recommended accessories:
Power supply
S12-5 (±12 V) 110/220V
Zero Gauss chamber ZG12
Petit-Moncor 14; P .O. Box 157
CH-1752 Villars-sur-Glâne, Switzerland
体外诊断
Phone:+41 26 40184 56 Fax: +41 26 401 84 57Email: info@mc-monitoring
Ordering Information:
Single Axis Magnetic Field Transducer
Type: YR100F-2-5P/N: 03.100.000/1
Due to the continual development of our products we reserve the right to modifiy the specifications without notification.Published: 11.08.01 Revised: 10.03.02 Filed:
YR100F.p65
MC-monitoring SA