编号 | 中文名称 | 英文名称 | |
EN 1113-1997 | 马延春卫生水龙头用淋浴设备软管（PN10） | Showers hoses for (PN 10) sanitary tapware | |
EN 12083-1998+AC-2000 | 呼吸保护装置 带呼吸软管的过滤器（无面罩式过滤器） 微粒过滤器、气体过滤器和混合式过滤器 要求、试验 | Respiratory protective devices - Filters with breathing hoses (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking | |
EN 12115-1999 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification | ||
EN 12374-1998 | 包装 软管 术语 | Packaging - Flexible tubes - Terminology | |
EN 12377-1998 | 包装 软管 封闭气密性的试验方法 | Packaging - Flexible tubes - Test method for the airtightness of closures | |
EN 12434-2000+AC-2001 | 低温容器 低温软管 | Cryogenic vessels - Cryogenic flexible hoses | |
EN 1256-1996 | 气焊设备 焊接切割及类似加工设备的软管附件规范 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes | |
EN 1327-1996 | 气焊设备 焊接和相关工艺用热塑软管 | Gas welding equipment - Thermoplastic hoses for welding and allied processes | |
EN 13482-2001 | 沥青用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification | |
EN 1360-1996 | 受测燃料配制用橡胶软管和软管部件 规范 | Rubber hoses and hose assemblies for measured fuel dispensing - Specification | |
EN 1361-1997 | 飞行燃油处理用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for aviation fuel handling - Specification | |
EN 13765-2003 | 输送烃类溶剂和化学制品的热塑性多层（非硫化）软管和软管组件 规范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification | |
EN 13766-2003 | 输送烃类溶剂和化学制品的热塑性多层（非硫化）软管和软管组件 规范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification | |
EN 138-1994 | 呼吸保护装置 与全罩式面罩、半罩式面罩或口罩一起使用的新鲜空气软管呼吸器 要求、测试、标志 | Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking | |
EN 13905-2003 | 卫生座便器用低阻力喷射排水软管 | Low resistance shower hoses for sanitary tapware | |
EN 1736-2000 | 制冷系统和热泵 软管元件 振动隔离器和伸缩接头 要求、设计和安装 | Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation | |
EN 1761-1999 | 燃料卡车送货用的橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for fuel truck delivery - Specification | |
EN 1762-1997 | 气压为25bar(2.5MPa)及以下的液化石油气LPG(液相或气相)及天然气用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification | |
EN 1765-1997 | 油的吸放装置用橡胶软管组装件 组装件规范 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies | |
EN 1947-2002 | 消防软管 水泵及车辆用半刚性输送水软管组装件 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles | |
EN 24641-1993 | 给水和排水用橡胶软管 规范 | Rubber hoses for water and discharge; specification (ISO 4641:1991) | |
EN 26801-1993 | 橡胶或塑料软管 容积膨胀的测定 | Rubber or plastics hoses-Determination of volumetric expansion (ISO 6801:1983) | |
EN 26802-1993 | 钢丝增强的橡胶和塑料软管及软管件 弯抗冲击试验 | Rubber and plastics hoses and hose assemblies, wire reinforced- Hydraulic impulse test with flexing (ISO 6802:1991) | |
EN 269-1994 | 呼吸保护装置 包括护罩的动力推动新鲜空气软管呼吸器 要求、测试、标志 | Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking | |
EN 271-1995+A1-2000+AC1997 | 呼吸保护装置 用于喷砂操作的包括护罩的压缩空气导管呼吸器或动力推动新鲜空气软管呼吸器 要求、测试、标 | Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking | |
EN 27326-1993 | 橡胶和塑料软管 静态条件下耐臭氧性的评定 | Rubber and plastics hoses-Assessment of ozone resistance under static conditions (ISO 7326:1991) | |
EN 28029-1993 | 塑料软管 通用型可折叠织物增强输水软管 规范 | Plastics hose-General purpose collapsible water hose, textile reinforced-Specification (ISO 8029:1985) | |
EN 28033-1993 | 橡胶和塑料软管 部件间粘合强度的测定 | Rubber and plastic hoses-Determination of adhesion between components (ISO 8033:1991) | |
EN 29168-1994 | 手持式牙科器械 软管连接件 | Dental handpieces - Hose connectors (ISO 9168:1991) | |
EN 559-2003 | 气焊设备 焊接、切割和同类处理用橡胶软管 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes | |
EN 560-1994 | 气焊设备 焊接、切割和同类处理用设备的软管连接 | Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes | |
EN 60684-2-1997+A1-2003 | 绝缘软管 第2部分：试验方法 | Flexible insulating sleeving - Part 2: Methods of test (IEC 60684-2:1997) | |
EN 60684-3-100 bis 105-2001 | 绝缘软管 第3部分：各种型号软管规范 活页100至105：挤压聚氯乙烯(PVC)软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 100 to 105: Extruded PVC sleeving (IEC 60684-3-100 to 105:2001) | |
EN 60684-3-121 bis 124-2001 | 绝缘软管 第3部分：各种型号软管规范 活页121至124：挤压有机硅软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 121 to 124: Extruded silicone sleeving (IEC 60684-3-121 to 124:2001) | |
EN 60684-3-145 bis 147-2001 | 绝缘软管 第3部分：各种型号软管规范 活页145至147：挤压聚四氟乙烯(PTFE)软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 145 to 147: Extruded PTFE sleeving (IEC 60684-3-145 to 147:2001) | |
EN 60684-3-151-1998 | 绝缘软套管 第3部分：单型套管的特殊要求活页151：通用挤压PVC／晴橡胶软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose (IEC 60684-3-151:1998) | |
EN 60684-3-217-1998 | 绝缘软管 第3部分：单型套管的特殊要求 活页217：热缩聚烯烃套管 阻燃 收缩比3：1 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 217: Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 3:1 (IEC 60684-3-217:1998) | |
EN 60684-3-218-1998 | 绝缘软管 第3部分：单型套管的特殊要求 活页218：.热缩聚烯烃套管 不阻燃 手缩比3：1 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 218: Heat-shrinkable polyolefine sleeving, not flame retarded, shrink ratio 3:1 (IEC 60684-3-218:1998) | |
EN 60684-3-228-1998 | 绝缘软管 第3部分：各种型号软管规范 活页228：热缩半刚性聚偏二氟乙烯套管 阻燃 耐流体 收缩率2：1 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-228:1998) | |
EN 60684-3-233-1998 | 绝缘软管 第3部分 各种型号套管的规范要求 活页２３３：热收缩氟弹性体软管 阻燃 耐流体 收缩比２： | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:1998) | |
EN 60684-3-246-2002 | 绝缘软管 第3部分：各种型号套管的规范要求 活页２４６：聚烯烃不阻燃双层壁热收缩套管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 246: Heat-shrinkable polyolefin sleeving, dual-wall, not flame-retarded (IEC 60684-3-246:2001) | |
EN 60684-3-271-1998 | 绝缘软管 第3部分：各种型号套管的规范 活页271：热收缩弹性软管 阻燃 耐流体 收缩比2：1 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-271:1998) | |
EN 60684-3-272-1998 | 绝缘软管 第3部分：各种型号软管规范 活页272：热收缩弹性软管 阻燃 耐流体 收缩比2：1 薄壁 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 272: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1, thin wall (IEC 60684-3-272:1998) | |
EN 60684-3-409-1999 | 绝缘软套管 第3部分：各种型号套管规范 活页409：聚胺脂(PUR)涂覆层的玻璃纤维软管 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating (IEC 60684-3-409:1999) | |
EN 61479-2001 | 带电作业 绝缘材料制软导线外皮(线软管) | Live working - Flexible conductor covers (line hoses) of insulating material (IEC 61479:2001) | |
EN 61770-1999 | 与总水管连接的电气器具 避免软管组件的反虹吸和失效 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets (IEC 61770-1998) | |
EN 739-1998+A1-2002 | 医疗气体设备用低压软管组件 | Low-pressure hose assemblies for use with medical gases | |
EN 853-1996 | 橡胶软管和软管配件 金属丝编织加强液压型 规范 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification | |
EN 854-1996 | 橡胶软管和软管配件 纺织增强液压型 规范 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification | |
EN 855-1996 | 协查通报塑料软管和软管配件 热塑料织物增强液压型 规范 | Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification | |
EN 856-1996 | 橡胶软管和软管配件 橡胶 包覆螺形线增强液压型 规范 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification | |
EN 857-1996 | 橡胶软管和软管配件 液压设备用金属丝编织增强压制型 规范 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification | |
EN ISO 10380-2003 | 管道系统 波纹金属软管和软管组件 | Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2003) | |
EN ISO 10960-1996 | 橡胶和塑料软管 动态条件下耐臭氧性的评定 | Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994) | |
EN ISO 11758-1997+AC-1998 | 橡胶和塑料软管 氙弧灯照射 颜和外观变化的测定 | Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance (ISO 11758:1995) | |
EN ISO 1307-1995 | 一般工业用橡胶和塑料软管 孔径和公差及长度公差 | Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992) | |
EN ISO 13628-2-2000 | 石油和天然气工业 水下采油系统的设计和操作 第2部分：海底和海洋设备用软管系统 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000) | |
EN ISO 1401-1999 | 农业喷雾用橡胶软管 | Rubber hoses for agricultural spraying (ISO 1401:1999) | |
EN ISO 1402-1996 | 橡胶和塑料软管和软管组件 液压试验 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994) | |
EN ISO 1403-1997 | 一般用途的输水橡胶软管 规范 | Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:1995) | |
EN ISO 14113-1997 | 气焊设备 最大设计压力为450bar的压塑空气和液化气用橡胶和塑料软管组件 | Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997) | |
EN ISO 15540-2001 | 船舶与造船技术 软管组件耐火性 试验方法 | Ships and marine technology - Fire resistance of hose assemblies - Test methods (ISO 15540:1999) | |
EN ISO 15541-2001 | 船舶与造船技术 软管组件耐火性 试验台技术要求 | Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999) | |
EN ISO 1746-2000 | 橡胶或塑料软管和管件 弯曲试验 | Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including technical corrigendum 1:1999) | |
EN ISO 2398-1997 | 织物增强的压缩空气用橡胶软管 规范 | Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995) | |
EN ISO 3861-1997 | 喷砂用橡胶软管 规范 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995) | |
EN ISO 3994-2000 | 塑料软管 给排水用螺纹型热塑性软管 规范 | Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998) | |
EN ISO 4023-1995 | 蒸气胶管 试验方法 | Rubber hoses for steam - Test methods (ISO 4023:1991) | |
EN ISO 4080-1995+AC-1998 | 橡胶与塑料软管和软管组件 漏气氯的测定 | Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:1991) | |
EN ISO 4671-2000 | 橡胶和塑料软管和软管组件 尺寸测量方法 | Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999) | |
EN ISO 4672-1999 | 橡胶和塑料软管 低温的弯曲试验 | Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997) | |
EN ISO 5771-1996 | 输送无水氨用橡胶软管和软管组件 规范 | Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification (including Corr 1:1995) | |
EN ISO 5774-2000 | 压缩空气用织物增强的塑料软管 规范 | Plastics hoses, textile-reinforced, for compressed air - Specification (ISO 5774:1997) | |
EN ISO 6224-1997 | 一般用途输水用织物增强塑料软管 规范 | Plastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:1995) | |
EN ISO 6803-1997 | 橡胶或塑料软管和软管组件 无弯曲的液压脉冲试验 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994) | |
EN ISO 6806-1995 | 油燃烧器用软管和软管组件 规范教育与社会的关系 | Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992) | |
EN ISO 6808-2000 | 给排油用塑料软管和软管组件 规范 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999) | |
EN ISO 6945-1996+A1-2000 | 橡胶软管 外覆层耐磨性的测定 | Rubber hoses - Determination of abrasion resistance of the outer cover (ISO 6945:1991) | |
EN ISO 7233-1995 | 橡胶和塑料软管和软管组件 耐真空性能测定 | Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991) | |
EN ISO 7662-1996 | 橡胶和塑料软管 衬里耐磨性的测定 | Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988) | |
EN ISO 7751-1997 | 橡胶和塑料软管和软管组件 试验压力和爆破压力对设计工作压力的比值 | Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991) | |
EN ISO 7840-1995+A1-2000 | 防水堵漏方法 小艇 耐火燃油软管 | Small craft - Fire resistant fuel hoses (ISO 7840:1994) | |
EN ISO 8028-2000 | 真空喷涂漆用橡胶和／或塑料软管和软管组件 规范 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999) | |
EN ISO 8030-1997 | 橡胶和塑料软管 易燃烧性试验方法 | Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995) | |
EN ISO 8031-1997 | 橡胶和塑料软管和软管组件 电阻率测定 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance (ISO 8031:1993) | |
EN ISO 8032-1999 | 橡胶和塑料软管和软管组件 液压脉冲弯曲试验(半欧姆型试验) | Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997) | |
EN ISO 8308-1995 | 橡胶和塑料软管和管件 液体透过管壁性能测定 | Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:1993) | |
EN ISO 8330-2000 | 橡胶和塑料软管和软管组件 词汇 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998) | |
EN ISO 8469-1995+A1-2000 | 小艇 非耐火燃油软管 | Small craft - Non-fire resistant fuel hoses (ISO 8469:1994) / Note: To be replaced by prEN ISO 8469 (2003-09). | |
劲雨煦风EN ISO 8580-1995 | 橡胶与塑料软管 稳定状态下耐紫外线的测定 | Rubber and plastic hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987) | |
HD 523.3.201 S1-1993 | 绝缘软管规范 第3部分：各种型号软管的规范要求 活页201：通用软交联聚氯乙烯热收缩软管，收缩比为2：1 | Specification for flexible insulation sleeving; part 3: specification requirements for individual types of sleeving; sheet 201: heat shrinkable sleeving, general purpose, flexible, cross-linked PVC, shrink ratio 2:1 (IEC 60684-3-201:1991) | |
prEN 10324-2001 | 钢丝和钢丝制品 软管增强用钢丝 | Steel wire and wire products - Hose reinforcement wire | |
prEN 13483-2002 | 测量加油机用带内部蒸汽回收的软管及软管组件 规范 | Hoses and hose assemblies with internal vapour recovery for measured fuel dispensing system - Specification | |
prEN 1361-2001 | 飞行燃油处理用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for aviation fuel handling - Specification | |
prEN 13618-2003 | 供水挠性软管（金属的和弹性材料） 规范和试验方法 | Water supply - Flexible hoses (elastomeric or plastic material hose with or without metallic or synthetic braiding) - Product standard | |
prEN 14420-1-2002 | 带夹具的软管配件 第1部分：试验和名称、测量、要求 | Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing | |
prEN 14420-10-2002 | 带夹具的软管配件 第10部分：凸轮锁紧连接规格 | Hose fittings with clamp units - Part 10: Gauges for cam-locking couplings | |
prEN 14420-11-2002 | 带夹具的软管配件 第11部分： 对称半连接规格（圭勒明方法） | Hose fittings with clamp units - Part 11: Gauges for symmetrical half couplings (Guillemin system) | |
prEN 14420-2-2002 | 带夹具的软管配件 第2部分：软管支架的软管附属部分 尺寸和类型 | Hose fittings with clamp units - Part 2: Hoses side parts of hose shank; Dimensions and types | |
prEN 14420-3-2002 | 带夹具的软管配件 第3部分：销式或螺栓式夹具 | Hose fittings with clamp units - Part 3: Clamp units, pinned or bolted | |
prEN 14420-4-2002 | 带夹具的软管配件 第4部分：法兰连接 | Hose fittings with clamp units - Part 4: Flange connections | |
prEN 14420-5-2002 | 带夹具的软管配件 第5部分：螺纹连接 | Hose fittings with clamp units - Part 5: Threaded connections | |
prEN 14420-6-2002 | 带夹具的软管配件 第6部分：：TW罐式卡车连接 | Hose fittings with clamp units - Part 6: TW tank truck couplings | |
prEN 14420-7-2002 | 带夹具的软管配件 第7部分：凸轮锁紧 | Hose fittings with clamp units - Part 7: Cam locking couplings | |
prEN 14420-8-2002 | 带夹具的软管配件 第8部分：对称半连接（圭勒明方法） | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) | |
prEN 14420-9-2002 | 带夹具的软管配件 第9部分：TW罐式卡车连接规格 | Hose fittings with clamp units - Part 9: Gauges for TW tank truck couplings | |
prEN 14421-2002 | 卷缩和弯曲的软管口和金属环 | Hose tail and ferrule for crimping and swaging | |
prEN 14422-2002 | 液化石油气软管用夹具型连接组件 | Clamp type coupling assemblies for LPG transfer hoses | |
prEN 14423-2002 | 额定压力达18bar在DN15-DN50的蒸气软管用夹具型连接组件 | Clamp type coupling assemblies for use with DN 15 to DN 50 steam hoses rated for pressures up to 18 bar | |
prEN 14424-2002 | 带螺纹箍的软管配件 | Hose fittings with screwed ferrules | |
prEN 14454-2002 | 饮用水的防回流污染装置 包括公称压力在DN15-DN32内的软管组合流阻止器 H族 A型 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 inclusive - Family H, Type A | |
prEN 1762-2003 | 气压为25bar(2.5MPa)液化石油气LPG(液相或气相)及天然气用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification / Note: Intended as replacement for EN 1762 (1997-10). | |
prEN 1763-2-2000 | 供气相丙烷和丁烷使用的挠性软管、管道及组装件 第2部分：对管咀接头及组装件的要求 | Flexible hose, tubing and assemblies for use with propane and butane in the vapour phase - Part 2: Requirements for nozzles, couplings and assemblies | |
prEN 1765-2001 | 油的吸放装置用橡胶软管组装件 组装件规范 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies | |
prEN 1924-2003 | 用于急救软管设备的不渗透吹塑软管 | Fire-fighting hoses - Non-percolating layflat delivery hoses and hose assemblies for pumps and vehicles | |
prEN 3086-1998 | 航空航天系列 软管系统 符号表示到15位 | Aerospace series - Hose assemblies - Designation limited to 15 digits | |
prEN 60684-3-214-2000 | 绝缘软套管 第3部分：各种型号软管规范 活页214：热缩聚烯烴软管 不阻燃 收缩比3：1厚壁和中厚壁 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1; Thick and medium wall | |
prEN 60684-3-216-2000 | 绝缘软套管 第3部分：各种型号软管规范 活页216：热缩 阻燃 有限着火危险软管 | IEC 60684-3-216: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 216: Heat-shrinkable, flame-retarded, limited fire hazard sleeving | |
prEN ISO 15465-2002 | 管道工程 条绕金属软管和软管组件 | Pipework - Stripwound metal hoses and hose assemblies (ISO/DIS 15465:2002) | |
prEN ISO 6134-1999 | 饱和水蒸汽橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for saturated steam - Specification (ISO/DIS 6134:1999) | |
prEN ISO 6807-2003 | 旋转式钻探和振动用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO/FDIS 6807:2003) | |
prEN ISO 7369-2002 | 管道工程 金属软管和软管装备 词汇 | Pipework - Metal hoses and hose assemblies - Vocabulary (ISO/DIS 7369:2002) | |
编号 | 中文名称 | 英文名称 | |
本文发布于:2024-09-21 16:41:54，感谢您对本站的认可！
本文链接：https://www.17tex.com/xueshu/142990.html
版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系，我们将在24小时内删除。
| 留言与评论（共有 0 条评论） |
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议