ADSP-218x Family EZ-ICE
Hardware
Installation Guide
2000 Analog Devices, Inc.
ADSP-218x Family EZ-ICE
Hardware
Installation Guide
a
Notice
Analog Devices, Inc. reserves the right to make changes to or to discontinue any product or service identified in this publication without notice.
Analog Devices assumes no liability for Analog Devices applications assistance, customer product design, customer software performance, or infringement of patents or services described herein. In addition, Analog Devices shall not be held liable for special, collateral, incidental or consequential damages in connection with or arising out of the furnishing, performance, or use of this product.
Analog Devices products are not intended for use in life-support applications, devices, or systems. Use of an Analog Devices product in such applications without the written consent of the Analog Devices officer is prohibited.jumper2
Users are restricted from copying, modifying, distributing, reverse engineering, and reverse assembling or reverse compiling the ADDS-218X- ICE-2.5V operational software (one copy may be made for back-up purposes only).
No part of this document may be reproduced in any form without permission.
Trademarks are property of their respective holders.
Limited Warranty
The ADDS-218X-ICE-2.5V hardware is warranted against defects in materials and workmanship for
a period of one year from the date of purchase from Analog Devices or from an authorized dealer.
Copyright © 2000, Analog Devices, Inc. All rights reserved.
Revision 2, May 2000
82-000332-01
Contents
1. INTRODUCTION (1)
2. REQUIREMENTS (2)
3. CONFIGURATION AND INSTALLATION (3)
3.1 INSTALLATION (3)
3.2 CONFIGURING THE ADSP-218X ICE POD (4)
3.3 CONNECTING THE POD TO YOUR TARGET SYSTEM (5)
3.4 CONNECTING THE EZ-ICE TO YOUR PC (7)
3.5 SOFTWARE INSTALLATION AND OPERATION (7)
3.6 EZ-ICE MODES (7)
3.6.1 HARD-RESET STATE (7)
3.6.2 SOFT-RESET STATE (7)
3.6.3 STANDBY MODE (8)
3.6.4 TRANSPARENT MODE (8)
3.6.5 EMULATOR SPACE (9)
3.6.6 USER SPACE (10)
4. INITIALIZING THE EZ-ICE (11)
MANUALLY CHANGING SERVER FIRMWARE TO THE EZ-ICE
5. SUPPORT (14)
5.1 TECHNICAL SUPPORT (14)
5.2 QUALITY ASSURANCE (14)
6. REFERENCE (15)
List of Figures
FIGURE 1. JUMPERS (4)
FIGURE 2a. TARGET BOARD EMULATION HEADER (6)
FIGURE 2b. EMULATION CONNECTOR (6)
FIGURE 3. FIRMWARE UPDATE (12)