IFI标准及第三版紧固件标准目录(中英)

IFI standard=IFI标准

中文名称: 美国工业用紧固件学会

英文名称: Industrial Fasteners Institute

简介: IFI成立于1931年，原名为美国螺栓、螺母和铆钉制造商学会(American Institute of Bolt,Nut and Rivet Manufacturers)。由北美螺栓、螺母、螺丝、铆钉及工业用各种特殊型号的紧固件制造商组成。与国内和国际技术组织合作，共同制订紧固件标准和技术规程，确保用户以最低的装配成本实现最大的工程效益和可靠性。紧固件和元件共有标准件500，000多个，特殊形式、尺寸的专用件3，000，000 多个。出版《紧固件标准集》，这是机械紧固件用户的主要参考书。书中收集了有关的标准，提供了所有各种形式通用商业工业紧固件的情况。各行业的设计工程师和生产经理都使用这本标准集。标准编号：标准代号IFI+三位数字例：IFI-153-2003 Stainless Steel Wire and Rods for Mechanical Fasteners 机械紧固件的不锈钢线和杆 IFI通过其网站提供Technical Reference Books、Additional Reference Books、Information Papers、VCR Tapes、IFI Standards、Fastener Quality Act Compliance Guide等信息服务。

IFI第三版紧固件标准目录(米制)

发布时间：2007-01-25

IFI第三版紧固件标准目录(米制)
A部分：螺纹
标准代号	标准名称(中文)	标准名称(英文)
IFI	公制螺纹基础	Basics of Metric Screw Threads
ASME B1.7M-1984(R2001)	螺纹的术语、定义和字母代号	Nomenclature, Definitions, and Letter Symbols for Screw Threads Revision of ANSI B1.7-1977
ASME B1.13M-2001	米制螺纹：M型	Metric Screw Threads: M Profile
ASME B1.3M-1992(R2001)	允许尺寸的螺纹测量系统英制和米制螺纹（UN, UNR, UNJ, M, 和 MJ）	Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ) Errata - 1994
ASME B1.16M-1984(R2001)	米制M型螺纹的量规和测量	Gages and Gaging for Metric M Screw Threads Revision of ANSI B1.16-1972
B部分：材料和涂镀
IFI	紧固件材料选择	Selecting Fastener Materials
IFI	螺栓和螺母的匹配	Bolt and Nut Compatibility
IFI	srvcc腐蚀作用	Corrosion
IFI	镀层和涂层	Platings and Coatings
ASTM F568M-2004	碳合金钢外螺纹米制紧固件规格	Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
ASTM A563M-2004	碳素钢和合金钢螺母规格(米制)	Standard Specification for Carbon and Alloy Steel Nuts [Metric]
ASTM F738M-2002	不锈钢金属螺栓、螺钉及螺柱规格(米制)	Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
ASTM F836M-2002	米制1型不锈钢螺母规格	Standard Specification for Style 1 Stainless Steel Metric Nuts
ASTM F468M-2006	普通有金属螺栓、六角帽螺钉和螺柱规格(米制)	Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]
ASTM F467M-2006	普通有金属螺母规格(米制)	Standard Specification for Nonferrous Nuts for General Use [Metric]
ASTM F788/F788M-2005	英制和米制系列螺栓、螺钉和柱螺栓表面不连续性规格	Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

柿子去皮机

ASTM F812/F812M-2003	英制和米制系列螺母表面不连续性规格	Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
ASTM F606M-2005	实施测定外螺纹及内螺纹紧固件、垫圈及铆钉的机械性能的试验方法(米制)	Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric
ASTM F871M-1998	加螺纹元部件电镀层标准规范(米制)	Standard Specification for Electrodeposited Coatings on Threaded Components [Metric]
ASTM B633-1998e1	钢铁表面电解沉积锌镀层规格	Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM B766-1986(2003)	镉电沉积镀层规格	太阳活动预报中心Standard Specification for Electrodeposited Coatings of Cadmium
ASTM A153/A153M-2005	钢铁构件镀锌层（热浸）规格	Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
ASTM B695-1991	钢铁表面锌机械沉积镀层规格	Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM B696-2000(2004)e1	镉机械沉积锌镀层的规格	Standard Specification for Coatings of Cadmium Mechanically Deposited
ASTM F1136-2004	紧固件用铬/锌防蚀镀层的规格	Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
ASTM F1135-1999(2004)	紧固件用铬酸镉或锌有机防蚀镀层的规格	Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
ASTM F1137-2000	紧固件用磷酸盐/油和磷酸盐/有机防蚀镀层的规格	Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners
C部分：螺栓、螺钉和螺柱
ASME B18.2.3.1M-2005	米制六角帽螺钉	Metric Hex Cap Screws
ASME B18.2.3.2M-2005	米制成形六角螺钉	Metric Formed Hex Screws
ASME B18.2.3.3M-1979(R2001)	米制粗六角螺钉	Metric Heavy Hex Screws Errata - April 1981
ASME B18.2.3.4M-2001	米制六角法兰螺钉	Metric Hex Flange Screws Supersedes IFI 536:1982
ASME B18.2.3.5M-1979(R2001)	米制六角螺栓	Metric Hex Bolts Errata - May 1981
ASME B18.2.3.6M-1979(R1995)	米制粗六角螺栓	Metric Heavy Hex Bolts Errata - April 1981
ASME B18.2.3.8M-1981(R1999)	米制六角木螺钉	Metric Hex Lag Screws
ASME B18.2.3.9M-2001	米制粗六角法兰螺钉	Metric Heavy Hex Flange Screws Supersedes IFI 538:1982

托瓦

ASME B18.2.3.10M-1996(R2003)	方头螺栓（米制系列）木盒制作	Square Head Bolts (Metric Series)
IFI 528-1999		Metric Studs and Bent Bolts
ASME B18.5.2.1M-1996(R2003)	米制圆头短方颈螺栓	Metric Round Head Short Square Neck Bolts Erratum - October 2001; Erratum - May 2003
ASME B18.5.2.2M-1982(R1993)	米制圆头方颈螺栓	Metric Round Head Square Neck Bolts
IFI 544-1998		Metric Round Head Ribbed Neck Bolts
ASME B18.5.2.3M-1990(R2003)	大圆头方颈螺栓（米制系列）	Round Head Square Neck Bolts with Large Head (Metric Series)
ASME B18.2.7.1M-2002	米制12键槽凸缘螺钉	Metric 12-Spline Flange Screws Erratum 12/2002
D部分：螺母
ASME B18.2.4.1M-2002 尾气吸收塔	米制1型六角螺母	Metric Hex Nuts, Style 1
ASME B18.2.4.2M-2005	米制2型六角螺母	Metric Hex Nuts, Style 2
ASME B18.2.4.3M-1979(R2001)	米制六角开槽螺母	Metric Slotted Hex Nuts Errata - May 1981
ASME B18.2.4.4M-1982(R1999)	米制六角凸缘螺母	Metric Hex Flange Nuts
ASME B18.2.4.5M-1979(R2003)	米制六角锁紧螺母	Metric Hex Jam Nuts Errata - May 1981
ASME B18.2.4.6M-1979(R2003)	米制粗六角螺母	Metric Heavy Hex Nuts Errata - April 1981
E部分：有效力矩紧固件
IFI	自锁紧固件介绍	Introduction to Locking Fasteners
IFI-524-1996	非金属嵌件公制有效力矩型螺钉性能试验方法	Test Procedure for the Performance of Metric Nonmetallic Resistant Element Prevailing-Torque Screws
IFI-525-1996	公制化学涂镀有效力矩型螺钉性能试验方法	Test Procedure for the Performance of Metric Chemical Coated Prevailing-Torque Screws
ASME B18.16.3M-1998	有效力矩型米制钢六角螺母和六角法兰螺母的尺寸要求	Dimensional Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts
ASME B18.16.1M-1979	有效力矩型米制钢六角螺母和六角法兰螺母的机械和性能要求	Mechanical and Performance Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts Errata - December 1980 R(2001)

本文发布于:2024-09-20 20:40:32，感谢您对本站的认可！

本文链接：https://www.17tex.com/tex/4/272457.html

上一篇：螺栓性能、等级、材质、选用标准、表面处理知识

下一篇：节能降耗措施(精选)

标签：米制紧固件螺母

留言与评论（共有 0 条评论）