pre-Welding procedure specification(pWPS) | 制订Made by: | ||||||||||||||||||||||
审核Verified by: | |||||||||||||||||||||||
批准Approved by: | |||||||||||||||||||||||
日期Date: | |||||||||||||||||||||||
地点: | 制造商焊接工艺编号: | ||||||||||||||||||||||
Location: | pWPS No. : | ||||||||||||||||||||||
焊接方法: | 坡口准备和清理: | ||||||||||||||||||||||
Welding process: | preparation and cleaning: | ||||||||||||||||||||||
接头类型: | 焊接设备: | ||||||||||||||||||||||
Joint type: | Welding equipment: | ||||||||||||||||||||||
母材规格(㎜): | 夹紧装置: | ||||||||||||||||||||||
Parent metal sizetmch(㎜): | Clamping arrangement: | ||||||||||||||||||||||
母材质保书: | 焊接位置: | ||||||||||||||||||||||
Base metal specification: | Welding positions: | ||||||||||||||||||||||
搅拌头材料: | 焊工姓名: | ||||||||||||||||||||||
Tool Material: | Welder,s name: | ||||||||||||||||||||||
焊接坡口准备(图)【Weld preparation details(Sketch)】: | |||||||||||||||||||||||
焊接接头形式 Joint design | 焊接顺序 Welding sequences | ||||||||||||||||||||||
焊接工艺参数【Welding details】: | |||||||||||||||||||||||
焊道 Run | 工艺 方法 Process | 搅拌针规格 Size of Pin Tool | 主轴转速 Spindle speed (R/min) | 直流无刷风扇压力 Friction pressure (KN) | 焊接 速度 Travel speed (mm/min) | 倾斜角度 Tilt agle (°) | 侧面倾斜角度 Side tilt Angle (°) | 搅拌针运动方向 Tool motion | 待机时间 Standby time (s) | ||||||||||||||
针长Needle length (mm) | 轴间直径Shaft diameter (mm) | ||||||||||||||||||||||
预热温度(℃): | 其它说明: | ||||||||||||||||||||||
Preheat temperature(℃): | Other information: | ||||||||||||||||||||||
预热维护温度(℃) : | 基值电流/峰值电压: | ||||||||||||||||||||||
Preheat maintenance temperature (℃) : | Base current/Peak voltage: | ||||||||||||||||||||||
层间温度(℃): | 脉冲频率(Hz): | ||||||||||||||||||||||
Interpass temperature(℃): | Pulse frequency(Hz): | ||||||||||||||||||||||
焊前热处理: | 脉冲时间(ms): | ||||||||||||||||||||||
Pre-weld heat treatment: | Pulse time(ms): | ||||||||||||||||||||||
焊后热处理: | 弧长/微调: | ||||||||||||||||||||||
Post-weld heat treatment: | Arc length/Fine adjust: 塑料冷却管 | ||||||||||||||||||||||
时间、温度、方法: | 摆动(焊道的最大宽度)(㎜): | ||||||||||||||||||||||
Time、temperature、method: | Weaving (Maximum width of run) (㎜): | 客房预定 | |||||||||||||||||||||
加热和冷却速度液冷服务器(℃/h): | 振动(振幅、频率、停留时间): | ||||||||||||||||||||||
Heating and cooling rates(℃/h): | Oscillation(Amplitude, frequency, dwell time): | ||||||||||||||||||||||
制造商: | |||||||||||||||||||||||
Manufacture: | |||||||||||||||||||||||
本文发布于:2024-09-24 03:25:43,感谢您对本站的认可!
本文链接:https://www.17tex.com/tex/4/255009.html
版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。
留言与评论(共有 0 条评论) |