同轴波导转换器的设计讲解

学校代码:视频处理10385                                            分类号:         
学    号:                                                密  级:         
 
学士学位
同轴——波导转换器的设计
Design of coaxial to waveguide transducer
作者姓名:                         
指导教师:                       
突起路标
学    科:                          通脉汤
研究方向:    电磁场与微波技术     
所在学院:    信息科学与工程学院   
论文提交日期:二零一四毛刷制作二十
学位论文独创性声明
本人声明兹呈交的学位论文是本人在导师指导下完成的研究成果。论文写作中不包含其他人已经发表或撰写过的研究内容,如参考他人或集体的科研成果,均在论文中以明确的方式说明。本人依法享有和承担由此论文所产生的权利和责任。
论文作者签名:                签名日期:         
高见光
学位论文版权使用授权声明
本人同意授权华侨大学有权保留并向国家机关或机构送交学位论文的复印件和电子版,允许学位论文被查阅和借阅。本人授权华侨大学可以将本学位论文的全部内容或部分内容编入有关数据库进行检索,可以采用影印、缩印或扫描等复制手段保存和汇编本学位论文。
论文作者签名:            指导教师签名:           
签 名 日 期:            签 名 日 期:           

摘  要
同轴—波导转换器是微波系统中非常重要的元器件。基于脊波导和波导阶梯对导播系统中电磁波传播性能的影响,本文探讨了这两种结构应用在 8-18GHz的宽带同轴—波导转换器设计中的情况。通过同轴—脊波导—矩形波导转换,并在脊波导上加载阶梯,很好地改善了阻抗匹配效果,提高了同轴—波导转换器的传输性能。阻抗变换是为了消除带内不良反射,以获得良好匹配的一种微波器件,广泛用于微波电路和天线馈电系统中。其结构上大致分为阶梯式和渐变式。前者能够比后者获得更好的带内波纹系数和更短的长度。对阶梯阻抗变换器的设计,主要分为传统设计方法和优化设计方法。本文的仿真结果证明脊波导和波导阶梯在设计同轴—波导转换器中的有效性,在8-18GHz的倍频程带宽内驻波小于1.25,产生的高次模非常小。
关键词:同轴—波导转换    脊波导    波导阶梯阻抗变换
Abstract
Coaxial-waveguide transition plays an important role in microwave system.Based on the influence of ridge waveguide and waveguide ladder exerted on transmission performance of electromagnetic wave in guided wave system, this paper discussed the situations of these two structures applied in the 8-18GHz broadband coaxial-waveguide converter designation. Through the conversion of coaxial-ridge waveguide-rectangular waveguide, and ladder loading of ridge waveguide, the effectiveness of impedance matching is well improved,and the transmission of coaxial-waveguide converter is highly advanced. Impedance transformation is to eliminate in-band bad reflection, in order to obtain a good matching microwave devices, widely used in microwave circuit and antenna feed system. Its structure is largely divided into stepwise and gradual type. The former can be better than the latter in-band ripple coefficient and the shorter length. The design of stepped impedance converter, mainly divides into the traditional design method and optimization design method.Simulation results proved the effectiveness of ridge waveguide and waveguide ladder in designing coaxial- waveguide converters.The VSWR of coaxial-waveguide transition designed in this paper is less than 1.25 in the 8-18 GHz octave bandwidth, and the high modulus produced is very small.
Key words:Coaxial-waveguide transition    Ridge waveguide    Waveguide ladder impedance transformation
ldc1314

本文发布于:2024-09-22 06:40:45,感谢您对本站的认可!

本文链接:https://www.17tex.com/tex/4/214575.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:波导   学位   设计
留言与评论(共有 0 条评论)
   
验证码:
Copyright ©2019-2024 Comsenz Inc.Powered by © 易纺专利技术学习网 豫ICP备2022007602号 豫公网安备41160202000603 站长QQ:729038198 关于我们 投诉建议