变压器油、液压油、润滑油危险理化特性表

变压器油、液压油润滑油危险理化特性表
超声波电子驱鼠器XXX Characteristics Table
Product Name: Transformer Oil
消声室制作
Chemical Name: Transformer oil
ace3
Appearance: Light-colored liquid
Odor: Odorless
电位器旋钮Initial Boiling Point:。250℃
Flash Point:。140℃
Water Solubility: Insoluble
Viscosity: <13mm2/s
Carbon Type Analysis: CA,%40;<3%
PCA Content: Alkanes。cycloalkanes。aromatic unsaturated hydrocarbons。and other compounds
DMSO: <1.0<-35℃
Density: 882 kg/m3
XXX: Soluble
钥匙复制机
n Point:。270°C
Physical and Chemical Hazards: When the temperature rises above the physical properties index。it may release flammable hazards.
Environmental and Human Health Hazards: XXX smoke (produced only at high temperatures) can XXX。Long-term or repeated skin contact can cause XXX。Eye contact may cause XXX.
XXX for a d of time。There is a risk of n of soil。water。and ground。Note: Under norma活性炭脱硫剂
l use。this product does not pose XXX。wipe off mineral oil。and wash skin with soap and plenty of water。Do not use clothing until it has been cleaned。If there is an allergic n。please contact a doctor.
Eye Contact First Aid: Rinse with plenty of water。If there is an allergic n。please contact a doctor.
XXX: If XXX inhaling mist。smoke。or vapor。XXX can be used if breathing difficulties occur。If symptoms do not improve。please contact a doctor。If breathing s。perform artificial XXX.
n First Aid: XXX with water。If a large amount is swallowed。please contact a doctor。Do not XXX.
XXX: Dry powder。carbon XXX can be used。Sprays can also be used。Do not use direct water flow.
Firefighting Personnel ns: XXX.
XXX: Personal ns: Wear XXX the fire source。Environmental ns: XXX drains。waterways。and soil。Contact local environmental XXX: If there is no danger。the leakage as soon as possible。For small leaks。use clay。sand。soil。or other XXX large leaks。pump the leaked oil into a suitable container。and then absorb it with the above-XXX gas treatment should follow Part 13.

本文发布于:2024-09-21 08:45:21,感谢您对本站的认可!

本文链接:https://www.17tex.com/tex/4/212000.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

留言与评论(共有 0 条评论)
   
验证码:
Copyright ©2019-2024 Comsenz Inc.Powered by © 易纺专利技术学习网 豫ICP备2022007602号 豫公网安备41160202000603 站长QQ:729038198 关于我们 投诉建议