裁剪基于RT-thread的温度监控系统

温度监控系统

现在，来想⼀想我们能够裁剪的东西都有什么；

1. ⾸先，Hardware Drivers Config都是必要的的配置不能减少

2. 接着，RT-Thread Online Packages中：

1. peripherarl libraries and drivers中是senosrs 驱动，这个裁剪到aht10（温湿度传感器），把The number of averaging

改成1看看是否能够运⾏，结果运⾏成功；

2. IoT - internet of things中，在RT-Thread AT component porting or samples for different device → Espressif

ESP8266中把The maximum length of receive line buffer改成128

3. 在 Paho MQTT: Eclipse Paho MQTT C/C++ client for Embedded platforms中去掉Enable debug log o

utput

(再⼩就会报错，显⽰[E/at.clnt] read line failed. The line data length is out[W/UART] Warning: There is no enough

buffer for saving data, please increase the RT_SERIAL_RB_BUFSZ option.)

针式吸盘3. RT-Thread Components

1. RT-Thread Components → Device virtual file system下的 The maximal number of opened files改成8

2. RT-Thread Components → Device virtual file system → elm-chan's FatFs, Generic FAT Filesystem Module下的

Maximum sector size to be handled改成2048

3. Network → Network interface device下的Enable ifconfig features，Enable ping features，Enable netstat芯棒

features，Enable default netdev automatic change features全部去掉于克儒

4. RT-Thread Kernel

硅凝胶贴膜1. The maximal size of kernel object name改成6

2. The stack size of idle thread改成128

3. RT-Thread Kernel → Inter-Thread communication 中去掉 mailbox和message queue

发货系统4. 去掉 Enable debugging features

我有删除了spi flash的使⽤，直接把读取到的温度上传到onenet，使得⼯程⼤⼩进⼀步缩⼩；小型变速箱

本文发布于:2024-09-20 14:56:44，感谢您对本站的认可！

标签：温度能够系统裁剪找到

留言与评论（共有 0 条评论）