顶隙 bottom clearance 圆周侧隙 circumferential backlash 法向侧隙 normal backlash径向侧隙 radial backlash 锥齿轮 bevel gear 锥齿轮副 bevel gear pair准双曲面齿轮副 hypoid gear pair 冠轮 crown gear 端面齿盘 contrate gear直齿锥齿轮 straight bevel gear 斜齿锥齿轮 helical bevel gear 曲线齿锥齿轮 spiral bevel gear弧齿锥齿轮 gleason spiral bevel gear 摆线齿锥齿轮 overlikon spiral bevel gear零度锥齿轮 zerol bevel gear 分度圆锥面 reference cone 分度圆 reference circle分锥顶点 reference cone apex 外锥距 outer cone distance 齿高 tooth depth 齿顶高 addendum 齿根高 dedendum 工作高度 working depth
弦齿高 chordal height 齿距 pitch 齿厚 tooth thickness
弦齿厚 chordal tooth thickness 弦齿高 chordal height 固定弦齿高 constant cord height
齿槽宽 space width 齿宽 face width 安装距 locating distance
轮冠距 tip distance 冠顶距 apex to crown 分度圆锥角 reference cone angle
齿顶角 addendum angle 齿根角 dedendum angle 压力角 pressure angle
齿厚半角 tooth thickness half angle 槽宽半角 apace width half angle
蜗杆 worm 蜗轮 worm wheel 蜗杆副 worm gear pair
环面蜗杆 enveloping worm 齿高 tooth depth 圆柱蜗杆副 cylindrical worm gear
渐开线蜗杆involute helicoid worm(ZI-worm) 齿根高 dedendum
阿基米得蜗杆 straight sided axial worm ZA-worm 齿顶高 dedendum
法向直廓蜗杆 straight sided normal worm ZN-worm 圆弧圆柱蜗杆 arc-contact worm
平面蜗轮 wildhaber-wormaheel 锥蜗杆 spiroid 锥蜗轮 spiroid gear
中间平面 mid-plane 齿顶圆 tip circle 齿根圆 root circle
齿距和升程 pitch and lead 节圆齿顶高 working addendum 节圆齿根高 working dedendum
线性参数 linear dimensions 蜗杆齿宽 worm face width 蜗轮齿宽 face width
直径系数 diameter quotient 咽喉半径 gorge radius 角参数 angular dimensions
齿宽角 width angle 分度圆导程角 lead-angle 基圆导程角 base lead angle
针轮 cylindrical lantern gear 齿轮副 gear pair 平行轴齿轮副 gear pair with parallel axes
相交轴齿轮副 gear pair with intersecting axles 交错轴齿轮副 gear pair with non-parallel
齿轮系 gear train 复合行星齿轮系 compound planetary gear train 配对齿轮 mating gears
小齿轮 pinion 大齿轮 wheel 行星齿轮 planet gear 行星架 planet carrier
太阳轮 sun gear 内齿圈 ring gear 外齿轮 external gear 内齿轮 internal gea
减速齿轮副 speed reducing gear pair 增速齿轮副 speed increasing gear train
中心距 centre distance 轴交角 shaft angle 连心线 line of centres
齿数比 gear ratio 传动比 transmission ratio 减速比 speed reducing ratio
参考平面 reference planes 轴平面 axial plane 基准平面 datum plane
节平面 pitch plane 端平面 transverse plane 法平面 normal plane遐想曲面 imaginary srufaces 分度曲面 reference surface 节曲面 pitch surface齿顶曲面 tip surface 齿根曲面 root surface 接地电缆
基本齿廓 basic rack tooth profile产形齿条 counterpart rack 基准线 datum line 轮齿特性 teetch characteristics轮齿 gear 齿槽 tooth space 右旋齿 right-hand teeth左旋齿 left-hand teeth 齿面 tooth flank 右侧齿面 right flank左侧齿面 left flank 同侧齿面 corresponding flanks 异侧齿面 opposite flanks工作齿面 working flank 非工作齿面 non-working flank 相齿齿面 mating flank可用齿面 rsable flank 有效齿面 active flank 上齿面 addendum flank下齿面 dedendum flank 齿根过渡曲面 fillet 齿顶面 crest top land齿槽底面(槽底)bottom land 齿廓 tooth profile 端面齿廓 transverse profile法向齿廓 normal profile 轴向齿廓 axial profile 齿线 tooth trace齿棱 tip surface 模数 module 端面模数 transverse module法面模数 normal module 轴向模数 axial module 径节内翅片管式换热器
diametral pitch当量齿数 virtual number of teeth 头数 number of threads 螺旋线 helix and spirals 圆锥螺旋线 conical spiral 螺旋角 helix angle 导程 lead
导程角 lead angle 摆线 trochoids 外摆线 eqicycloid
圆心渐开线 involute to a circle 延伸渐开线 prolate involute 螺旋面 helicoid
干涉 interference 修形 correction of the flank shape 修像 tip relief
修根 root relief 齿面修形 axial modification 齿端修薄 end relief
鼓形修整 crowning 挖根 undercut 瞬时轴 instantaneous axis
啮合 engagement mesh 齿宽 face width 端面啮合线 transverse path of contact
啮合齿 面 surface of action啮合平面 plane of action 重合度 contact ratio and overlap ratio
总作用弧 total arc of transmission 纵向作用overlap arc 总作用角 total angle of transmission
径向变位系数 overlap arc 圆程齿轮和圆柱齿轮副 ckyclindrical gears and gear pairs
齿条 rack 直齿轮 spur gear 斜齿轮 helical gear 直齿条 spur rack
大字齿轮 double-helical gear 渐开线齿轮 involute cylindrical gear 齿距 pitch
圆弧圆柱齿轮 circular -arc gear 分度圆柱面 reference cylinder 节圆柱面 pitch cylinder
基圆柱面 base cylinder 齿顶圆柱面 tip cylinder 齿根圆柱面 root cylinder
节点 pitch point 分度圆 pitch line 节圆 pitch circle 基圆 base circle
齿顶圆(顶圆) tip circle 齿根圆(根圆) root circle 法向螺旋线 normal helix 齿距角 angular pitch 公法线总长 base tangent length 竖流沉淀池分度圆直径 reference diameter
technical -economic index 金属热处理 metal heat treatmetn 整体热处理
bulk heat treatmetn 化学热处理 thermo-chemical treatment 扩散层
diffusion zone 局部热处理 local heat treatmetn 预备热处理
conditioning treatment 气氛热处理 atmosphere heat treatment 等离子热处理
plasma heat treatment 形变热处理 thermomechanical treatment(TMT) 热处理工艺周期
thermal cycle 升温时间 heating-up time 穿透加热 through heating 差温加热
differential heating 保温 holding 奥氏体化 austenitizing 吸热式气氛
endothermic atmosphere 放热式气氛 exothermic atmosphere 马氏体临界冷却速度
critical cooling rate 风冷 forced air cooling 等温转变 isothermal transformation 退火
annealing 淬火 cyaniding 金相检验 quench hardening 预防白点退火
hydrogen-relief annealing 深冷处理(冷处理) metallographic examination 相变点
subzero treatment 淬硬层 quench-hardened case 调质 quenching and tempering 时效
ageing 形变时效 strain ageing 天然时效 seasoning 炭墨
组培容器soot 冷脆 cold brittleness 双导程蜗杆蓝脆 blue shortness 复碳
carbon restoration 强渗期 carburazing period 渗氮 nitriding 渗硼
sulphurizing 渗硅 siliconizing 渗硫 sulphurizing 碳氮共渗
carbonitriding 氰化
acceleration tolerance加速度耐力 acceptance tolerance验收公差accepted tolerance规定容限, 可接受容限 adaptation tolerance适应耐受性allowable tolerance容许公差 angle tolerance角度公差 basic tolerance基本公差bilateral tolerance双向公差 calibration tolerance校准公差close tolerance紧公差, 严格的容限 commercial tolerance普通公差composite tolerance复合公差, 综合误差 contour tolerance外形公差diameter tolerance直径公差 dimensional tolerance尺寸公差distortion tolerance变形公差 effective tolerance有效公差fit tolerance配合公差 gearing tolerance齿轮公差grinding tolerance磨削留量, 磨削裕量 gross tolerance总公差电气石陶瓷球hole tolerance孔径公差 length tolerance长度公差manufacturing tolerance制造公差 location tolerance位置, 装置, 安装公差pitch tolerance螺距公差(螺纹); 节距公差(齿轮) mismachining tolerance加工误差position tolerance位置公差 rolling tolerance轧制公差 roundness tolerance圆度公差run-out tolerance摆差, 跳动公差 shrinking tolerance收缩公差speed tolerance容许转速偏差 squareness tolerance垂直度公差tilt tolerance倾斜容限 unilateral tolerance单向公差 user's tolerance使用公差valley tolerance凹度容限 tolerance of form整形公差 |
|
机械中常见英语单词
cover 上盖 support 下盖 top 上部 bottom 底部
cap (帽,杯) housing 壳 insert(型,芯) Box 组件
holder 支座 roller 转子 belt 皮带 impeller风扇
case 箱 filter 滤网 flex hose 软管 metal 金属
shaft 轴 gear 齿轮 washer 垫片 die cast 铸件
nut 螺母 bush 轴套 screw 螺丝 fit配合
ring 垫圈 plate 片 gate 水口 rework 加工
bar 杆 spindle轴芯 pin 小轴 bearing 轴承
thread 螺纹 powder metal 粉末冶金 pinion 小齿轮 Run-out跳动
switch 开关 toque 扭矩 force 力 revise 更改
sampling 抽样 fitting 装配 futtonal 功能 aperance 外观
vibration 振动 finished 表面处理 cavity 模腔 model 型号
part 零件 assembly 部件 accessory附件 remark 注释
mark 标记 approve 认可 defect 缺陷 nonconformity 不合格
comformity 合格 sinkage 缩水 burr 毛刺 sharp edge 尖缘
flow mark 流痕 rusty 铸跡 hardness 硬度 treatment 热处理