Chunghwa Picture Tubes, Ltd. Product Specification
To : Date :
TFT LCD
去污剂CLAD043JD02 CXA
■ full size ■ 1/4 cut
ACCEPTED BY :
Version 1.0
光
模块安装
APPROVED BY
CHECKED BY
挡风被
PREPARED BY
Prepared by : Small &Medium Product Planning Management Department Small &Medium Product General Division CHUNGHWA PICTUER TUBES, LTD.
1127 Hopin Rd., Padeh, Taoyuan, Taiwan 334, R.O.C. TEL: +886-3-3675151 FAX: +886-3-377-3001
Doc.No:
SPEC_CLAD043JD02_Ver.1.0 _CPT_ 20130507
Issue Date: 2013.04.30
CPT
信号调理模块CHUNGHWA PICTURES TUBES, LTD.,
REVISION STATUS
Revision Description Notice 0.0 First revision 1.0 .Modify the FPC Pin Assignment Pin NO.101 V11 V10 ；Pin NO.102 V12 V11 ； Pin NO.115 V2 V1 ； Pin NO.116 V3 V1 ； Pin NO.118 V3 V2 ； Pin NO.119 V3 V2 ； Pin NO.121 V4 V3 ； Pin NO.122 V5 V3 ； Pin NO.124 V5 V4 ； Pin NO.125 V6 V4 ； Pin NO.131 V7 V5 ； Pin NO.132 V8 V5 ； Pin NO.134 V7 V6 ； Pin NO.135 V8 V6 ； Pin NO.140 V8 V7 ； Pin NO.141 V9 V7 ； Pin NO.143 V9 V8 ； Pin NO.144 V10 V8 ； Pin NO.107 VDD3 VDD2 ； Pin NO.108 VDD4 VDD2 ； Pin NO.109 VDD5 VDD2。 Page 20 11 Rev. Date 2012.03.08 2013.04.30荧光纤维 CPT Confidential
2/20
SPEC_CLAD043JD02_Ver.1.0_CPT_20130507
CPT
CHUNGHWA PICTURES TUBES, LTD.,
CONTENTS
1. OVERVIEW………………………………………………………………………………….. 4 2. ABSOLUTE MAXIMUM RATINGS ………………………………………………………5
3. MECHANICAL SPECIFICATIONS ….………………………………………………………6 3.1 Outline Dimension ……………………………………………………….………………6
3.2 IC & FPC Pad……………………………………………………………….………………7 3.2.1 IC Pad ……………………………………………………………….………………8 3.2.2 Driver IC Block Pos
ition on the glass……………………………….……………..9 3.2.3 FPC Pad ………………………………………………………..…………… 10
3.2.4 FPC Pin Assignment ………………...……………………………………… …...11 3.3 Panel check pad in panel …………………………………………….……………… 12
3.3.1 Cell test lightwaveform …………………………………………….…………… 13 3.3.2 Timing……………………………………………………………………………… 13 3.4 Panel ID pad ……………………………………………………………..…………… .14 4. CELL PROCESS RULES ………………………………………………..……………… ..15 4.1 Cell Scribing Layout ………………………………………………….………….…… 15 4.1.1 full size …………………………………………………………….……….…… ..15 4.1.2 1/4 cut …………………………….………………………………….…….…… 16 4.2 Rubbing Direction ….……………………………………………………… .…………..17 4.3 PI Pattern ….……….………………………………………………………….……… 17 4.4 Seal Pattern……………………....……….……………...………………..……………18 5. OPTICAL SPECIFICATIONS .………………………………………………………… …19 6. HANDLING PRECAUTIONS FOR EMPTY CELL .……………………………….……..20
CPT Confidential
3/20
SPEC_CLAD043JD02_Ver.1.0_CPT_20130507
CPT涂锡焊带
CHUNGHWA PICTURES TUBES, LTD.,
1.OVERVIEW
CPT CLAD0430JD02 is a cell product of 4.3" color TFT-LCD (Thin Film Transistor Liquid Crystal Display), which is 16:9 aspect ratio panels for the high end PND or PDVD application The 4.3” screen produces a high resolution image that is composed of 130,560 (480×272) pixel elements in a stripe arrangement. General specifications are summarized in the following table: ITEM Panel Size Display Area (mm) CF glass dimension TFT glass dimension Number of Pixels Pixel Pitch (mm) Color Pixel Arrangement Display Mode Driving Method Viewing Direction Suggesting IC Weight LCD Cell Drawing (Note 1)
1 1 2 2 479 480
SPECIFICATION 4.3" inch 95.04(H) x 53.856(V) 102.04(H) x 58.756(V)x0.5(D) 102.04(H) x 63.006(V)x0.5(D) 480(W) x 3(RGB) x 272(H) 0.198(H)x0.198(V) RGB vertical stripe normally white TN TFT active matrix 6 o’clock OTA5180A 15.2 g
RG B RG B RG B RG B
RG B RG B RG B RG B RG B : Pixel
: Dot R G B (Sub-pixel)
271 272
RG B RG B RG B RG B
RG B RG B RG B RG B 0.198mm
0.198 mm
The LCD Products listed on this document are not suitable for use of aerospace equipment, submarine cables, nuclear reactor control system and life support systems. If customers intend to us
e these LCD products for above application or not listed in "Standard" as follows, please contact our sales people in advance.
CPT Confidential
4/20
SPEC_CLAD043JD02_Ver.1.0_CPT_20130507
CPT
CHUNGHWA PICTURES TUBES, LTD.,
2. ABSOLUTE MAXIMUM RATINGS
Item Operating Ambient Temperature Operating Ambient Humidity Storage Temperature Storage Humidity Symbol Min. Max. TOP HOP TSTG HSTG -20 10 -30 10 +70 90 +85 90 Unit ˚C % (RH) ˚C % (RH) Remark
Note 1. The absolute maximum ratings are the values that must not be exceeded at any time for this
product. It is not allowed for any of these ratings to be exceeded. Should a product be used with any of the absolute maximum ratings exceeded, the characteristics of the product may not be recovered, or in an extreme case, the product may be permanently destroyed. Therefore, when desigining a system incorporating the product, make sure that adequate attentions be paid to the variations in the supply voltages, the characteristics of parts that are connected, surges in the input and output lines, and the ambient temperatures. Note 2. This specification applys after the driver IC mounting and the FPC mounting. (This specification isn’t applicable at time of driver IC un-mounting and FPC unmounting.) LCD should keep the condition that dew dosen’t storage in case of driver IC unmounting and FPC un-mounting. Dew may break the LCD. Especially part is very weak for dew.
CPT Confidential
5/20
SPEC_CLAD043JD02_Ver.1.0_CPT_20130507
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议