JCJX-KJ12+18+24/500框式绞线机 1、主要性能特点： 本设备主要用于裸铝线、裸铜线以及钢芯铝绞线的扇形导体，圆`形导体紧压绞制，拉拔紧压绞制及单芯预成形紧压等电力电缆线芯的绞合。本设备的特点是：线盘分装在绞笼四周成四等分，中心轴不受线盘重量的负载，故设备刚性强度高、整体性能好、转动惯量小、运行速度高。该设备采用36级变速牙箱传动，采用双主动、双牵引装置，分线轮采用自然分线，避免线芯在绞合过程中擦毛。设备采用目前最为先进的断线停车装置，可直接控制到每个线盘，任意一个线盘断线主机会自动停车，确保断线后的补线，特别适用于电力电缆及高紧压的交联电缆的生产。 2、主要技术参数： 2.1 绞合单线直径： 铜Ø1.5 - Ø5.0 mm 铝Ø1.8 - Ø5.0 mm 2.2 绞合及（拉模方式紧压）最大截面： 铜630钢管自动切割机
（500） mm2 铝800（630）mm2 2.3 绞笼转速： 63 - 148 r/min（六级） 2.4 生产线速度：油泵法兰 6.87 - 52.2 m/min 2.5 绞合节距： 47 - 825 mm 2.6 主电机功率： 90kw（DC） 2.7 量脚器
框内放线盘规格： PND500 2.8 中心线放盘规格： PN 1600 2.9 收线盘规格： PN 2500 2.10 设备总长度： 38m 2.11 设备中心高： 1000 mm 2.12 装机总功率： 122kw 3、设备主要组成部件： 3.1 12.18.24盘绞笼体 (54盘) 各壹套 3.2 并线模架及紧压装置 叁套 3.3 计米器 壹套 3.4 Ø2000双牵引装置（含牵引轮上导体张力压紧装置） 壹套 3.5 Ø2500（端轴式）收排线装置 壹套多聚磷酸盐
3.6 主牙箱及36级变速牙箱传动装置 壹套 3.7 电控系统 及操作台加密芯片 壹套 3.8 PND800-1600中心放线架 壹套 3.9 500单盘上盘装置 叁套 3.10 气动扳手 叁把主营产品或服务：框绞机,大拉机, 铜线拉丝机，超细线拉丝机，铜包铝拉丝机，铜包钢拉丝机,切割线拉丝机，不锈钢线，黄铜线拉丝机,铜线绞机，退火机，在线退火机，铜镀铜机，铝镀铜机,轨道交通系统滑轮式拉丝机，直进式拉丝机 JCJX-KJ12 +18 +24 / 500 wire-frame machine 1, the main performance characteristics: Of the equipment used bare aluminum, copper and bare conductor ACSR of the fan-shaped, round-shaped conductor pressed `twist, pull-twist-pressed and pressed, such as single-core pre-forming the core of the power cable Stranded. The device is characterized by: Pan-packing line in the twist around the cage into a sub-four, the central axis line from the weight of the load plate, the device rigid high-strength, good overall performance, the moment of inertia of small, high-speed operation. The equipment used 36 tooth gear box drive, dual-active, two-traction devices, sub-line round of the natural sub-line to avoid lines twisted in the core in the process of cleaning hair. Equipment used at present the most advanced line of parking devices, will have direct control over each line to the plate, an arbitrary line of disk disconnect automatically stopping the host, to ensure that after the break up of the line, e
specially suitable for high-power cable and pressed to pay the Joint production of the cable. 2, the main technical parameters: Stranded diameter of 2.1 one-way: copper Ø1.5 - Ø5.0 mm Al Ø1.8 - Ø5.0 mm Stranded and 2.2 (die way pressed) the largest cross-section: copper 630 (500) mm2 Aluminum 800 (630) mm2 2.3 twisted cage speed: 63 - 148 r / min (6) 2.4 production line speed: 6.87 - 52.2 m / min Stranded 2.5 pitch: 47 - 825 mm 2.6 the main motor power: 90kw (DC) 2.7 actinomycetes box set specifications: PND500 Center of the 2.8 release set specifications: PN 1600 2.9 specifications set-up: PN 2500 2.10 equipment with a total length: 38m 2.11 Equipment Center High: 1000 mm 2.12 The total installed capacity of power: 122kw 3, the major equipment components: 3.1 12.18.24 cage-plate cutter (54) set the one 3.2 Line and mold and pressed three sets of devices 3.3 Jimiqiyi sets 3.4 Ø2000 two-traction device (including traction on the round conductor tension clamping device) one set of 3.5 Ø2500 (end-axis) received one set of cable installation 3.6 teeth main gear box and 36 tooth gear box of one set 3.7 electronic control system and console one set of 3.8 PND800-1600 release center line of one set of planes 3.9 500 single-disc set on three sets of devices 3.10 pneumatic wrench to three M
ain products or services: Box cutter, drawing large, copper wire drawing machines, ultra-fine line drawing, drawing Baolv copper, copper clad steel wire drawing machine, cutting line drawing machine, the line of stainless steel, brass line drawing machine, copper wire cutter, Annealing, annealing line, copper copper, aluminum copper, pulley-drawing machine, drawing machine-Straight
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议