Document Title
1M x 16 bit Pseudo SRAM Specification
Revision History
Revision No. History Date Remark 0.0-.Initial Draft May.212008Preliminary
Dec.152008Release
遮蔽肩垫1.0-.EM7164SU16BLP, EM7164SU16BMP, EM7164SU16BNP,
懒人床EM7164SU16BPP, EM7164SU16BRP & EM7164SU16BSP
are unified to EM7164SU16BxP.
-.I CC1P changed to I CCP.
-.I CC1(Cycle time=Min.) changed to I CC2(Cycle time=Min.).
-.I CC1(Cycle time=1us) added to DC AND OPERATING
CHARACTERISTICS table in page 5.
1.1-.Part name changed from EM7164SU16BxP-70LF
Mar.32009
to EM7164SU16BxP-70LFx
-.FEATURES & PRODUCT FAMILY updated in page 2.
-.ABSOLUTE MAXIMUM RATINGS table updated in page 4.防辐射裙
-.RECOMMENDED DC OPERATING CONDITIONS & DC AND
OPERATING CHARACTERISTICS updated in page 5.
-.AC CHARACTERISTICS updated in page 6.
-.Note corrected in page 3 and 12.
-
.PACKAGE DIMENSION modified in page 13.
电容耐压测试仪-.MEMORY FUNCTION GUIDE updated in page 14.
1.2-.Operating voltage changed to
微型麦克风
2.6V~
3.6V(typ:3.3V)Mar.42010
1Mb x16 Pseudo Static RAM Specification
GENERAL DESCRIPTION
The EM7164SU16BxP is 16,777,216 bits of Pseudo SRAM which uses DRAM type memory cells, but this device has refresh-free operation and extreme low power consumption technology. Furthermore the inter-face is compatible to a low power Asynchronous type SRAM. The E M7164SU16BxP is organized as 1,048,576 Words x 16 bit.
FEATURES
- Organization :1M x16
- EM7164SU16BLP support 8 page mode & DPD - Power Supply Voltage : 2.6 ~ 3.6V
- EM7164SU16BMP support 8 page mode & Non-DPD - Separated I/O power(VccQ) & Core power(Vcc)- EM7164SU16BNP support 16 page mode & DPD - Three state outputs
- EM7164SU16BPP support 16 page mode & Non-DPD - Byte read/write control by UB# / LB#- EM7164SU16BRP support Non-page mode & DPD - Auto-TCSR for power saving - EM7164SU16BSP support Non-page mode & Non-DPD
- Package type : 48-FPBGA 6.0x7.0- Operating Temperature . Extended : -25 ~ 85 . Wireless : -30 ~ 85 . Industrial : -40 ~ 85
FUNCTION BLOCK DIAGRAM
DQ0~DQ15
A0~A19
ZZ#CS#UB#LB#WE#OE#
PIN DESCRIPTION ( 48-FBGA-6.00x7.00 )
TOP VIEW (Ball Down)
Note : ZZ# pin is replaced to NC pin in EM7164SU16BMP, EM7164SU16BPP, EM7164SU16BSP.
ABSOLUTE MAXIMUM RATINGS 1)
1. Stresses greater than those listed above “Absolute Maximum Ratings” may cause permanent damage to the device.
Functional operation should be restricted to recommended operating condition. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
2. Undershoot at power-off : -1.0V in case of pulse width < 20ns
FUNCTIONAL DESCRIPTION
Note:
1. X means don’t care. (Must be low or high state)
2. This Low Power mode is supported in EM7164SU16BLP, EM7164SU16BNP & EM7164SU16BRP.
网络收集RECOMMENDED DC OPERATING CONDITIONS 1. Overshoot: V CC +1.0 V in case of pulse width < 20ns
2. Undershoot: -1.0 V in case of pulse width < 20ns
3. Overshoot and undershoot are sampled, not 100% tested. CAPACITANCE1) (f =1MHz, T A=25o C)
1. Capacitance is sampled, not 100% tested,
DC AND OPERATING CHARACTERISTICS
1. Maximum Icc specifications are tested with V CC = V CCmax.