LITE MAX LD1041
Sunlight Readable 10.4" LCD Display
(1st Edition 3/26/2004 )
All information is subject to change without notice.
LITE MAX Electronics Inc.
4F, No.131-3, Lane235, Bau-chiau Rd.,
Shin-dian City, Taipei County, Taiwan R.O.C.
Tel : 886-2-8919-1858
Fax: 886-2-8919-1300
Homepage: www.litemax.tw
元器件交易网b2b
Contents:
Introduction and overview……..........................................P3
A. Physical specifications…….......................................... P4
B. Electrical specifications…........................................... P5
1. Pin assignment….......................................................P5
2. Absolute maximum ratings…...............................................P6
3. Electrical characteristics….................................................P7
a. Typical operating conditions…..........................................P7
b. Display color v.s. input data signals…...........................……...P8
c. Input signal timing…................................................P9
d. Display position…...................................................P10
e. Backlight driv ing conditions…......................................P11
C. Optical specifications…................................................. P12
D. Reliability test items….................................................... P14
E. Display quality…....................................................... P15
F. Handling precaution …................................................ P15
Appendix:
Fig.1 LCM outline dimensions…...........................…...............P16
Fig.2 P17
Li2701 Inverter .............................................................P18
2020 A/D Board…...........................................................P24
.
INTRODUCTION AND OVERVIEW
This is a product specification that specifies form, fit, and function of the 10.4” TFT LCD monitor and its options. The L D1041 products are a family of high bright LCD monitors intended for use in a variety of
industrial and commercial applications. Some of these applications include Car TV, Kiosk, Control Panel,
Fish Finder, Marine, POI, Teketing, Aviation, Advertising, Gas Pumps, The LCD panel for
L D1041 has a particularly fast response time of 35ms and consequently very well suited for video applications.
The L D1041 is a 10.4” active matrix TFT LCD with a native resolution of 800X600 (SVGA). It has a typical luminance of 1500 nits with a +12VDC input. The video interface is through a standard 15 pin analog input with an integrated On-Screen Display (OSD).
OUTLINE
STRUCTURE AND PRINCIPLE
L D1041 module is composed of the driver LSIs for driving the TFT (Thin Film Transistor) array with an
amorphous silicon thin film transistor liquid crystal display (a-Si TFT LCD) panel structure and a backlight.
The a-Si TFT LCD panel structure is injected liquid crystal material into the narrow gap between a TFT array glass substrate and a color filter glass substrate.
RGB (Red, Green, and Blue) data signals from a source system are modulated into a form suitable for active matrix addressing by the onboard signal processor and sent to the driver LSIs which in turn address the
individual TFT cells.
Working as an electro-optical switch, each TFT cell regulates transmitted light from the backlight assembly when worked by the data source. Color images are created by regulating the amount of transmitted light through the array of red, green and blue dots.
APPLICATIONS
E Car TV, Kiosk, Control Panel, Fish Finder, Marine, POI, Teketing, Aviation, Advertising, Gas Pumps, FEATURES
¡E wide viewing angle
E F ast response time
E H igh Contrast Ratio
¡E L VDS
¡E W ide color gamut
E V ery hight brightness
¡E S unlight Readable
A. Physical specifications
NO. Item Specification Remark
1 Display resolution (pixel) 800(H)×600(V)
2 Active area (mm) 211.2(H)×158.4(V)
3 Screen size (inch) 10.4(Diagonal)
手动
榨油机4 Pixel pitch (mm) 0.264(H)×0.264(V)5 Color configuration R. G. B. Vertical stripe
6 Overall dimension (mm) 340(W)×228(H)×54.2(D) (typ.) Note 1
7 Weight (kg) 3.15 ±10
Note 1: Refer to Fig. 1. & 2.
B. Electrical specifications
1. Pin assignment
(1) Input signal interface
Pin no Symbol Function Etc.
1 V CC+3.3 V power supply
3 V power supply
3 GND Ground
4 GND Ground
5 RxIN0-
6 RxIN0+
LVDS receiver signal channel 0
7 GND Ground
8 RxIN1-
风送系统
9 RxIN1+
LVDS receiver signal channel 1
10 GND Ground
11 RxIN2-
12 RxIN2+
LVDS receiver signal channel 2
13 GND Ground
14 CKIN-
15 CKIN+
LVDS receiver signal clock
16 GND Ground
17 NC No Connection
18 NC No Connection
19 GND Ground
20 GND Ground
CN1 (20P) connector: HRS DF 19K-20P-1H or compatible
(2) LVDS transmitter/receiver signal mapping
Symbol Function
TxIN0 R0 Red data (LSB)
TxIN1 R1 Red data
TxIN2 R2 Red data
TxIN3 R3 Red data
TxIN4 R4 Red data
TxIN5 R5 Red data (MSB)
6 bit red display data
TxIN6 G0 Green data (LSB)
TxIN7 G1 Green data
TxIN8 G2 Green data
TxIN9 G3 Green data
TxIN10 G4 Green data
TxIN11 G5 Green data (MSB)dingx
6 bit green display data
TxIN12 B0 Blue data (LSB)
TxIN13 B1 Blue data
TxIN14 B2 Blue data
TxIN15 B3 Blue data
TxIN16 B4 Blue data
TxIN17 B5 Blue data (MSB)
6 bits blue display data
TxIN18 Hs Horizontal sync.
TxIN19 Vs Vertical sync.
TxIN20 DE Data enable
TxCLKIN CLK Clock Dot clock
2. Absolute maximum ratings (GND = 0 V)
水控系统
Values Parameter Symbol
Min. Max. Unit
Remark
Power voltage V CC-0.3 4 V DC At 25℃Input signal voltage V LH-0.3 V CC+0.3 V DC At 25℃
Operating temperature T op 0 +50 ℃Note 1
Storage temperature T ST-20 +60 ℃Note 1 Note 1:The relative humidity must not exceed 90% non-condensing at temperatures of 40℃or less. At temperatures greater than 40℃, the wet bulb temperature must not exceed 39
℃. When operate at low temperatures, the brightness of CCFL will drop and the lifetime
of CCFL will be reduced.编织布
Note 2:The unit should not be exposed to corrosive chemicals.
.
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议