Vol. 19 No. 4Dec #2019第19卷第4期
南京师范大学学报(工程技术版)2019 年 12 月 JOURNAL OF NANJING NORMAL UNINERSITY( ENGINEERING AND TECHNOLOGY EDITINN) doi : 10.3969/jCgn. 1672-1292.2019.04.013
舆情终端
鲍怡伶S 张浩然2,赵阳3
(1.江苏省医疗器械检验所,江苏南京210016)
(2.盐城工学院电气工程学院,江苏盐城224051)
(3.南京师范大学南瑞电气与自动化学院,江苏南京21°°23)
吸油烟机止回阀
[摘要]功率因数校正(power factor correction ,PFC )变换器产生的电磁干扰对集成电路造成了严重影响,能否 快速的解决PFC 变换器的EMI 问题,对设备的安全稳定运行至关重要.以Boost PFC 电路作为研究对象,分析其 电路结构并在电路软件中搭建模型,提取电路中噪声源电流,结合辐射噪声计算公式,对电路模型进行场路协同 仿真,得到噪声频谱,并在此基础上提出辐射抑制措施. [关键词]Boost PFC 电路,电磁辐射,仿真研究,抑制措施
流量测量装置[中图分类号]TM933 [文献标志码]A [文章编号]1672-1292(2019)04-0075-06
Research on Radiation Electromagnetic Interference Analysis
and Suppression of Boost PFC Circuit
Bao Yiling 1, Zhang Hao ran 2 ,Zhao Yang 3
(1.Jiangsu Medical Device Ipspectiop Ipstitute ,Napjipg 21°°16,China )
(2.School of Electrical Epgipeeripg , Yapchepg Institute of TechncOogy , Yancheng 224051,China ) (3.School of NARI Electrical and Automation ,Napjipg Normal Upiversim ,Napjipg 210023,(X00)
Abstract :The electromagnetic interference caused by a power factor correction (PFC)converter has made a great ipfluence on the integated circuit , and whether to rapidly solve the EMI problem of a PFC converter is vital to the saie and stable operation of the device. Therefore ,this paper takes Boost PFC circuit as the research object,analyzes its circuit structure and buiOs a model in circuit software , extracts the noise source current in the circuit , combines the radiation noise calcula tion formula , and performs field-path cc-sigul
ation on the circuit model to obtain the noise spectrum. Based on this , radia tion suppression measures are proposed.
Key words : Boost PFC circuit , eUcWomaanetic radiation , simulation study , suppression measure 近几年来现代电力电子技术、信息化技术发展迅猛,开关电源作为高可靠性的电力电子装置得到广泛 的应用,EMI 对于现代电力电子装置的影响也越来越大[1-3].由于分布电容、开关电源电路结构、高频变压 器、整流电路等产生了大量的辐射骚扰问题,这些超标噪声不仅影响周围电子设备,也给其自身带来了严 重危害•而作为开关电源中的主要部分Boost PFC 吸引了许多学者进行研究,其MOSFET 和二极管的开断 切换更是电磁干扰噪声的主要来源之一["呵•
在电路的设计中,工程师首先考虑的就是Bost PFC 变换器的电磁兼容问题,提前对产品可能的噪声 源进行预测与辐射评估,提出有效的解决方案,减少对产品投资,有效减小噪声干扰对设备的影响,确保产 品通过电磁兼容的相关测试.
1 Boost PFC 电路原理及辐射分析雨水管理系统
1.1 Boost PFC 电路原理分析
can总线电路
图1展示了 Boost 升压电路图,我们用(表示输入直流电压,用P 表示MOSFET 开关管,用L 。表示 升压电感,+为输出电容,单项导通二极管表示为F ,人为负载.收稿日期:2°19-°9-l°• 通讯联系人:赵阳,博士,教授,研究方向:电磁兼容技术及应用.E-mail :z haoyap1@ pjpu.cdu.cp
—75 —
环己胺氢溴酸盐