Customer Name | Order No. | Product Name | |||||||||||||
Specification | Total Production Quantity | Result :□NG NOT GOOD □OK | |||||||||||||
Sampling Standard: | Sampling Inspection Instruction | ||||||||||||||
Quality Requirement： | CR:(CRITICAL) 0 MA(MAJOR):0.4 MI(MINOR):1.0 | ||||||||||||||
一、 Visual and Dimensional Inspection | |||||||||||||||
No. | Parts | Inspection Items | Inspection Method | Test equipment | Defect | Results | Remark | ||||||||
NG | OK | Unacceptable | |||||||||||||
1 | Outside Carton | 1.1 Damage/ Dirt | Visual Inspection | Visual Inspection | |||||||||||
1.2 Length* Width* Height | Check it up with BOM | Calipers | |||||||||||||
1.3 Content/stickiness/damage of the tags | Check it up with data | Visual Inspection | |||||||||||||
2 | Inner Box | 2.1 Damage/ Dirt | Visual Inspection | Visual Inspection | |||||||||||
2.2 Length* Width* Height | Check it up with BOM | Calipers | |||||||||||||
2.3 Content/stickiness/damage of the tags | Check it up with data | Visual Inspection | |||||||||||||
2.4 Package | Check it up with order | Visual Inspection | |||||||||||||
3 | Ontology | 3.1 color/appearance/cleanliness | Visual Inspection | Visual Inspection | |||||||||||
3.2 Seize of the lamp | Check it up with BOM | Calipers | |||||||||||||
二、Test | |||||||||||||||
No. | Inspection Items | Inspection Method & Standard | Actual Parameter | Test equipment | Defect | Results | Remark | ||||||||
NG | OK | Unacceptable 电杆钢模 | |||||||||||||
4 | Aging Test | Under the punch of aging machine ﹥4H | Aging Machine | ||||||||||||
5 | Puncture Test | Under the punch of aging machine﹥4H | Aging Machine | ||||||||||||
6 | Power | The use of power meter+—1W | Power Meter | ||||||||||||
6印刷制版机 | Color Temperature | The same as customer’s requirement | Integrating Sphere | ||||||||||||
7 | CRI | The same as customer’s requirement | Integrating Sphere | 蜡烛杯||||||||||||
8 | Angle | The same as customer’s requirement | Integrating Sphere | ||||||||||||
| 糖浆罐 | |||||||||||||||
客户名称 | 定单号 | 产品名称 | |||||||||
产品规格 | 生产总数 | 结论：□NG □OK | |||||||||
Inspection Standard | 抽样检验指导书 | ||||||||||
质量要求：致命瑕疵（CR:0) 严重瑕疵（MA:0.4）轻微瑕疵（MI:1.0） | |||||||||||
一、外观尺寸检验 | |||||||||||
序号 | 部位 | 检验内容 | 检查方法 | 检验设备 | 缺点别 | 检验结果 | 说明 | ||||
NG | OK | 不接受 | |||||||||
1 | 外箱 mvkkk | 1.1外箱表面破损、脏污 | 目测 | 目测 | |||||||
1.2外箱的长*宽*高 | 与BOM表核对 | 卷尺 | |||||||||
1.3贴纸内容、粘性、破损 | 与数据检验 | 目测 | |||||||||
2 | 内盒 | 2.1内盒表面破损，脏污 | 目测 | 目测 | |||||||
2.2内盒的长*宽*高 | 与BOM表核对 | 卷尺 | |||||||||
2.3贴纸内容、粘性、破损 | 与数据检验 | 目测 | |||||||||
2.4内盒包装物 | 与定单核对 | 目测 | |||||||||
3 | 本体 | 3.1颜、外观、洁净度 | 目测 | 目测 | |||||||
3.2整灯的尺寸 | 与BOM表核对 | 卡尺 | |||||||||
二、测试检验 | |||||||||||
序号 | 检验内容 | 检查方法及标准 | 实际参数 | 检验设备 | 缺点别 | 检验结果 | 说明 | ||||
NG | OK | 不接受 | |||||||||
4 | 老化测试 | 使用老化机冲压状态下﹥4H | 老化机 | ||||||||
5 | 耐压测试 | 使用老化机脉压冲击状态下﹥4H | 老化机 | ||||||||
6 | 功率测试 | 使用功率测试仪+—1W | 功率测试仪 | ||||||||
6 | 温测试 | 积分球测试与客户所须一致 | 积分球 | ||||||||
7 | 显指测试 | 积分球测试与客户所须一致 | 积分球 | ||||||||
8 | 角度测试 | 积分球测试与客户所须一致 | 积分球 | ||||||||
本文发布于:2024-09-24 07:16:40，感谢您对本站的认可！
本文链接：https://www.17tex.com/tex/3/142675.html
版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系，我们将在24小时内删除。
| 留言与评论（共有 0 条评论） |
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议