汉文名 | 英文名 | 备注 |
密炼机 | internal mixer | |
椭圆形转子密炼机 | elliptical-rotor-type mixer | |
三角形转子密炼机 | trilateral-rotor-type mixer | |
圆筒形转子密炼机 | cylindrical-rotor-type mixer | |
剪切型密炼机 | shearing mixer | |
啮合型密炼机 | meshing mixer | |
同步转子密炼机 | synchronous rotor internal mixer | |
异步转子密炼机 | asynchronous rotor internal mixer | |
单速密炼机 | single speed mixer | |
双速密炼机 | double speed mixer | |
多速密炼机 | multi-speed mixer | |
变速密炼机 | variable speed internal mixer | |
低速密炼机 | low-speed mixer | |
中速密炼机 | medium-speed mixer | |
高速密炼机 | high-speed mixer | |
左传动密炼机 | left-driven mixer | |
右传动密炼机 | right-driven mixer | |
下落式密炼机 | drop mixer | |
翻转式密炼机 | dispersion mixer | 又称加压式捏炼机。 |
调距式密炼机 | clearance adjusting mixer | |
串联式密炼机 | tandem type mixer | |
连续混炼机 | continuous mixer | 详见造粒部分 |
连续塑炼机 | continuous plasticator | |
密炼机转子 | mixer rotor | |
前转子 | front rotor | |
后转子 | rear rotor | |
右传动 | right-hand drive | |
左传动 | left- hand drive | |
转子端面形状 | rotor section form | |
转子转速 | rotor speed | |
转子速比 | speed ratio of rotors | |
转子相位关系 | rotor phase relationship | |
转子构型 | rotor configuration | |
转子凸棱 | rotor wing | |
椭圆形转子 | elliptical rotor | |
三角形转子 | triangle rotor | |
圆筒形转子 | cylindrical rotor | 又称圆柱形转子。 |
二棱转子 | tow-wing rotor | |
三棱转子 | three-wing 混炼机rotor | |
四棱转子 | four-wing rotor | |
六棱转子 | six-wing rotor | |
八棱转子 | eight- wing rotor | |
剪切型转子 | tangential rotor | |
啮合型转子 | intermeshing rotor | |
同步转子 | synchronous rotor | |
异步转子 | asynchronous rotor | |
密炼室 | mixing chamber | 又称混炼室、混合室。 |
密炼室内壁 | mixing chamber in wall | |
密炼室正面壁 | mixing chamber front wall | |
密炼室侧面壁 | mixing chamber side wall | |
对开式密炼室 | folio-style mixing chamber | 又称上下组合式密炼室。 |
剖分式密炼室 | split-style mixing chamber | 又称前后组合式密炼室。 |
翻转式密炼室 | flip-style mixing chamber | |
倾斜式密炼室 | tilting-style mixing chamber | |
密炼机工作容量 | working volume of mixing chamber | 又称额定容量。 |
密炼机总容量 | total volume of mixing chamber | 又称有效容量、净容量。 |
密炼机空容量 | empty volume of mixing chamber | |
填充系数 | filling coefficient | |
一段混炼 | single-stage mixing | |
二段混炼 | second-stage mix | |
多段混炼 | multi-stage mix | |
水浸式冷却 | water-immersion cooling | |
喷淋式冷却 | spray cooling | |
夹套式冷却 | jacketed cooling | |
钻孔式冷却 | drilling cooling | |
大孔串联式冷却 | macroporous tandem cooling | |
小孔并联式冷却 | micropore parallel cooling | |
小孔串联式冷却 | micropore tandem cooling | |
转子密封装置 | dust stop of rotor | |
密炼机上辅机 | up-stream equipment of mixer | |
密炼机下辅机 | down-stream equipment of mixer | |
双螺杆压片机 | twin-screw sheeter | |
上顶栓 | upper ram | 又称压砣。 |
上顶栓压力 | ram piston pressure | |
加料机构 | feed module section feed | |
压料装置 | pressing ram device | 又称上顶栓。 |
加料门 | feed hopper door | |
填料箱 | packing box | |
下顶栓 | lower ram | |
卸料装置 | discharge device | 又称下顶栓。 |
滑动式卸料装置 | sliding-type discharge device | |
摆动式卸料装置 | swing-type discharge device | 又称下落式卸料装置、翻板式卸料装置。 |
卸料门 | discharge door | 又称下顶栓、滑门。 |
锁紧装置 | locking-unit | |
翻转装置 | tilting device | |
排胶温度 | rubber discharging temperature | |
胶片冷却装置 | batch off unit; slab cooling unit | |
本文发布于:2024-09-21 13:42:53,感谢您对本站的认可!
本文链接:https://www.17tex.com/tex/2/384939.html
版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。
留言与评论(共有 0 条评论) |