Insight on Color Vol. 8, No. 7
CIE L*a*b* Color Scale
Background
In 1976, the CIE recommended the CIE L*a*b*, or CIELAB, color scale for use. CIE Publication 15.2 (1986), Section 4.2, contains details on this color scale. It was intended to provide a standard, approximately uniform color scale which could be used by everyone so that color values could be easily compared.
The CIELAB color scale is an approximately uniform color scale. In a uniform color scale, the differences between points plotted in the color space correspond to visual differences between the colors plotted. The CIELAB color space is organized in a cube form. The L* axis runs from top to bottom. The maximum for L* is 100, which represents a perfect reflecting diffuser. The minimum for L* is zero, which represents black. The a* and b* axes have no specific numerical limits. Positive a* is red. Negative a* is green. Positive b* is yellow. Negative b* is blue. Below is a diagram representing the CIELAB color space.
There are delta values associated with this color scale. ∆L*, ∆a*, and ∆b* indicate how much a standard and sample differ from one another in L*, a*, and b*. These delta values are often used for quality
control or formula adjustment. Tolerances may be set for the delta values. Delta values that are out of the tolerances indicate that there is too much difference between the standard and the sample. The type of correction needed may be determined by which delta value is out of tolerance. For example, if ∆a* is out of tolerance, the redness/greenness needs to be adjusted. Whether the sample is redder or greener than the standard is indicated by the sign of the delta value. For example, if ∆a* is positive, the sample is redder than the standard.
The total color difference, ∆E*, may also be calculated. The ∆E* is a single value which takes into account the differences between the L*, a*, and b* of the sample and standard. It does not indicate which parameter(s) (L*, a*, and/or b*) are out of tolerances if ∆E* is out of tolerance. It may also be misleading in some cases where ∆L*, ∆a*, or ∆b* is out of tolerance, but ∆E* is still within tolerance. In addition, there are two other delta values that are related to this scale, ∆C* and ∆H*. The ∆C* is the difference in chroma between the sample and standard as described in a polar coordinate system. The ∆H* is the difference in hue angle between the sample and standard as described in a
新型避孕套
polar coordinate system.
The CIELAB color scale may be used on any object whose color may be measured. It is used extensively in many industries. As was intended, it provides a standard scale for comparison of color values.
Conditions for Measurement
Instrumental: Any HunterLab color measurement instrument
Illuminant: Any
Standard Observer Function: 2 or 10 degree
Transmittance and/or Reflectance: Either.
Formulas
If X/X n , Y/Y n , and Z/Z n are all greater than 0.008856, then
L* = 116 Y /Y - 16n 3
()3n 3n Y/Y - X/X 500 = *a ()3n 3n Z/Z - Y/Y 200 = *b
If any of X/X n , Y/Y n , or Z/Z n is equal to or less than 0.008856, then
()n Y/Y 903.3 = *L
()()[]n n Y/Y f - X/X f 500 = *a
()()[]n n Z/Z f - Y/Y f 200 = *b
where
X, Y, and Z are the CIE Tristimulus Values
X n , Y n , and Z n are the tristimulus values for the illuminant
Y n is 100.00
X n and Z n are listed in the tables below. CIE 2 Degree Standard Observer
Illuminant X n Z n
A 109.83 35.55
C 98.04 118.11
D 65 95.02 108.82
F2 98.09 67.53
TL 4 101.40 65.90
UL 3000 107.99 33.91
D 50 96.38 82.45
D 60 95.23 100.86
D 75 94.96 122.53
CIE 10 Degree Standard Observer
Illuminant X n Z n
A 111.16 35.19
C 97.30 116.14
D 65 94.83 107.38
F2 102.13 69.37
TL 4 103.82 66.90
橡胶
还原剂UL 3000 111.12 35.21
防盗车牌架
D 50 96.72 81.45
D 60 95.21 99.60
D 75 94.45 120.70
()3n n X/X = X/X f when X/X n > 0.008856
+ X X 7.87 = X/X f n n ⎟⎟⎠⎞
⎜⎜⎝⎛ when X/X n < 0.008856
()3n n Y/Y = Y/Y f when Y/Y n > 0.008856
()11616 + Y Y 7.87 = Y/Y f n n ⎟⎟⎠⎞
⎜⎜⎝⎛ when Y/Y n < 0.008856
()3n n Z/Z = Z/Z f when Z/Z n > 0.008856
()11616 + Z Z 7.87 = Z/Z f n
n ⎟⎟⎠⎞
⎜⎜⎝⎛ when Z/Z n
< 0.008856 ∆L* = L*sample - L*standard + ∆L* means sample is lighter than standard
- ∆L* means sample is darker than standard
∆a* means sample is redder than standard
∆a* = a*sample - a*standard +
- ∆a* means sample is greener than standard
∆b* means sample is yellower than standard
突起
路标∆b* = b*sample - b*standard +
- ∆b* means sample is bluer than standard
222
∆∆∆∆
E* =L*+ a*+ b*
∆C* = C*sample - C*standard
where
22(this is called metric chroma)
C* =a*+ b*
cielab
222
∆∆∆∆
H*E*- L*- C*
Typical Applications
This color scale may be used for measurement of the color of any object whose color can be measured. For Additional Information Contact:
Technical Services Department
Hunter Associates Laboratory, Inc.
11491 Sunset Hills Road
Reston, Virginia 20190
Telephone: 703-471-6870
FAX: 703-471-4237
www.hunterlab