首页 > 专利信息

移动式升降平台简介中英文 Mobile lifting platform 翻译

Mobile lifting platform

额定载荷：200~2000kg

举升高度：4~16米

驱动方式：液压

动力源：柴油、蓄电池、三相交流。

行走方式：手推式、牵引式、自行式和车载式。

Capacity: 200~2000kg

Lifting height: 4-16m

Driving mode: hydraulic drive

Power supply: diesel oil, storage battery, three phase current

Walking ways: hand push, pull-type, self-style and vehicle-mounted style

产品简介：移动剪刀叉式液压升降平台（mobile hydraulic scissor lift platform）是用途广泛的高空作业专用设备。举升采用液压缸推动剪刀叉机械结构，使升降台起升有较高的稳定性。宽大的作业平台和较高的承载能力，使高空作业范围更大、并适合多人同时作业。升降平台移动性好，转移场地方便；外型美观，适于室内外作业和存放。

Brief introduction: Mobile hydraulic scissor lift platform is a widely used special equipment for high altitude operations. The lifting adopts hydraulic cylinder to push the scissor mechanical structure, which makes lifting platform rise with stability. Wide work platform and high bearing capacity make the high-altitude operation more extensive and suitable for multiple people to work at the same time. The lifting platform is of good movability and convenient to transfer the site. Beautiful appearance, suitable for indoor and outdoor operation and storage.

适用范围：工地、厂房、仓库、粮库、车站、宾馆、机场、码头、加油站、体育场、电力、高架管道等高空设备安装维修、清洁等，还用于起吊设备维护、野外电力设施维护、钢结构厂房维护等；是您高空作业的好帮手。

Application: especially applied in factory, workshop, warehouse, grain depots, stations, hotels, airports, docks, gas stations, stadiums, electric power, elevated pipelines, etc., installation, maintena

nce, cleaning, etc. It also used for maintaining of lifting equipment and outdoors electric facilities as well as steel structure workshop. The mobile lifting platform can better help you do high altitude works.

产品优势：

1、3~16米高度任意配置, 各类高度可定制生产，范围广，用途多。

2、三相交流电、蓄电池、内燃机多种动力源可选。另配有手压泵，供停电时使用。

3、电器箱固定在平台底座上，并配有急停按钮，以防突发事故。一套手持按钮，可放在台面上的任一位置。也可选遥控控制。强力胶配方

4、移动方式多样，手推、机动车牵引、自行式和车载式。

5、可拆卸式护栏，方便拆卸，可以减少存储空间，方便进出有高度限制的场所。

6、剪叉为高强度锰钢矩形管，强度高、升高稳定、可靠。

7、宽大的作业平台，承载能力大。高空作业范围宽。可适合多人。

8、特制的铸钢铰耳。更加耐磨，使用寿命长。

9、配置工具箱：可放随机的工具，满足快捷维修需要。

10、伸缩式支撑和调节支撑脚。确保使用过程稳固可靠。

11、采用聚氨酯油漆，耐腐蚀性好，有利于室外长时间存放。多种颜配置，按客户需要配。

Advantages:

1 Available to choose the height from 3 to 16m. All kinds of height can be chosen.

2 Three phase current, storage battery, internal combustion engine can be chose as source of power.

3 Electrical box fixed on the platform base, and equipped with a stop button, in case of accidents.

自制一个牙签弓4 It can be move in a variety of ways, hand push, pull-type, self-style and vehicle-mounted style

5 Removable type guardrail, convenient disassembly, can reduce the storage space, convenient in and out of the places where highly restricted.

6 The scissor made of strong manganese steel rectangular tube with high strength, stability and reliability advantages.

7 The widely working platform can bear heavy load. Multiple workers can operate the platform, because it has widely high attitude working ranges.

8 Specially casting steel hinge ears will be more wear-resistant with longer service life.

9 Configuring toolbox: basic tolls can be placed to meet the need of quick maintenance.

10 Telescopic support and adjustment of the support feet to ensure stable and reliable use

11 Polyurethane paint with good corrosion resistant. Different colors can be freely choose by customers.

安全设施：

1、配有紧急停止按钮，突发情况下按下按钮后平台会缓缓降下。

2、停电时配有应急下降装置。

3、设有超载保护. 确保在安全承重状态下运作。

4、车轮在作业期间处于制动状态辣椒红素的提取

5、平台和油缸活塞双行程开关限制为升高限位提供双重保障，平台到达最高点时非常平稳，最大程度保证安全性。

6、一米高四面护栏，确保作业安全。

Security facilities:

1 Assembled with emergency stop button. The platform will slowly down when it press the button in an emergency occasion.

2 Equipped with emergency descending device when power failure occurs.

3 Overload protection is provided to ensure the operation under safe load bearing condition

4 The wheel is in a braking state during operation

5 Double stroke switch restrictions on platform and cylinder piston provide double guarantee for elev

ating the limit. The platform is very stable when it reaches the highest point to ensure maximum safety.

6 One meter high fence all around to ensure the operation safety

Detailed specifications:

Model	Lifting height去皮刀片	Lifting capacity	Platform dimension (Length*Width)mm	一叶荻Matching power
SJY-4	4m	300~2000kg	1800*1100	2.2~4.0kg
SJY-6	6m	300~2000kg	1800*1100
SJY-8	8m	300~2000kg	1800*1100
SJY-10	10m	300~2000kg	2000*1200
SJY-12	12m	300~1000kg	2000*1200
SJY-14	14m	200~500kg	2400*1300
SJY-16	16m	滚花铜螺母200/300kg	2800*1400	3.0/4.0kg