手表金属表壳的制作工艺流程车钻锣雕
CNC加工流程 process flow of CNC
车壳来胚→雕格仔纹→3.9H巴孔→安全带卡扣耳仔配壳位→铣按的位→粗钻
按的孔→胶内罩位
Blank after turning → Milling the plaid → Drilling the 3.9H cown hole
→ Milling the lug to fit the end piece → Milling the pusher position
→ Rough drilling the pusher hole→ movement holder position
机器人拉车车壳来胚→壳钻面钉吼→壳钻按的孔→壳钻巴孔→精钻巴孔→圈拔避按的位→注塑出货
Case blank after turning → drilling 吊葫芦dial hole in the case → drilling pusher hole in the case → drilling crown hole in the case → fine drilling the crown hole → milling the pusher recess of basel ring → injection
车壳来胚→ 壳雕底平→ 壳雕配胶位→ 圈锣钻石纹→ 镶件锣钻石纹→胶罩配壳位→ 雕胶罩面字印
Case blank after turning → milling the case bottom → milling the position of fitting the plastic → milling the diamond texture of the ring → milling the diamond texture of the inlay piece →milling the notch position for movement holder → milling the marking of movement holder
来胚→ 壳锣底平→ 底件配壳位→ 壳底件碰焊→ 胶罩配壳位→ 胶罩锣外形→ 胶罩铣面
Blank after stamping → milling the case bottom → milling the position of the bottom part fitting the case → soldering the case back → milling the notch for movement holder → milling the shape of the plastic holder → milling the surface of the plastic holder
来胚→ 壳锣底平→ 壳避位胶罩位→ 胶罩粗中孔→ 胶罩锣外形→ 铣胶罩配壳位→ 铣胶罩四角避位
Blank after stamping → milling the case bottom → milling the notch for movement holde
r → drilling the middle hole of the plastic holder → milling the shape of the plastic holder → milling the plastic holder to fit the case → milling the four corner clearance of the plastic holder
钻壳工艺流程
Process Flow of Drilling Case
来胚→ 烧焊→ 粗钻(2H、3H、4H) → 钻耳孔→ 烧壳身件(分离) → 钻牙孔→ 攻牙 打批锋Q货→ 出货
Blank after stamping → soldering → rough drilling (2H、3H、4H) → drilling lug hole → soldering case body piece → drilling screw thread hole → tapping thread , removing burrs , inspection → deliver to assembly
车壳来货→ 粗钻(2H、3H、4H) → 拔位/钻准(2H、3H、4H) → 钻耳孔→ 钻牙孔/攻牙→ 锣12H米位→ 打批锋、Q货→ 出货
Case blank after turning → rough drilling (2H、3H、4H) → crown recess /drilling (2H、3H、4H) → drilling lug hole → drilling screw thread hole/tapping thread → milling notch at 12H → removing burrs, inspection → deliver to assembly
来胚→ Q胚确认→ 粗钻3H→ 粗磨打油→ 烧焊过炉→ 拔位/ 3H→ 钻耳孔配带→打批锋、Q货→ 出货高效除雾器
Blank after stamping→ Checking blank → rough drilling (3H) → rough polishing →soldering bracelet → crown recess(3H) → drilling lug hole for matching bracelet → removing burrs, inspection →deliver to assembly
来胚→ 粗钻(2H、3H、4H、) → 粗钻(8H、 9H、 10H) → 钻耳孔→ 钻牙孔→ 精钻(2H、 3H、 4H 、8H、 9H、 10H) → 攻牙→ 打批锋、Q货→ 出货
Blank after stamping → rough drilling (2H、3H电弧发生器、4H) → rough drilling (8H、 9H、 10H) → drilling lug hole → drilling screw thread hole → fine drilling(2H、 3H、 4H 、8H、 9H、 10H) → tapping thread →removing burrs, inspection → deliver to assembly
CNC来货→ 精钻3H→ 钻耳孔配带→ 锣腰线→ 钻石位
Blank after CNC → fine drilling stem hole(3H) → drilling lug hole for fitting bracelet → milling the case side → drilling holes for stones
车壳来货→ 粗钻(2H 3H 4H) → 拔位/钻准(2H 3H 4H) → 钻耳孔配带 → 钻耳面钢压钉孔→打批锋Q出货→ 出货
Case blank after turning → rough drilling (2H、 3H、 4H) → crown recess /drilling (2H、3H、4H) →drilling lug hole for fitting bracelet →drilling lug face, hole for decoration pin → removing burrs, inspection →deliver to assembly
车壳工序流程
Process flow of turning the case
来胚→ 粗丝吼→光刻工艺 粗面子口、外元面平→ 精车丝孔→ 精车面胶圈坑面平外圆→ 烧壳耳罩→精车牙位、胶圈坑、底平→ 精车面子口→ 车牙 case blank → rough turning case inside dimension → turning the dial opening ,turning the top surface → fine turning case inside dimension → fine turning top surface outside circumference → soldering the case lug → fine turning thread area, o-ring groove, turning bottom surface → fine turning dial opening → turning thread