浪潮思科交换机相关配置

浪潮思科交换机相关配置
浪潮思科交换机相关配置
⽬录
1、配置vlan⽰例
vlan  3
no shutdown
>>>>>>>##
interface vlanif 3
no shutdown
2、配置聚合端⼝
interface port-channel 1
no shutdown
3、配置聚合端⼝,并将物理接⼝加⼊到聚合端⼝(mode 为active),并设置为trunk ,允许所有vlan 通过。
>>>>>>>>>>>>>>>#
非晶型磷酸盐结晶#注意:接⼝的设置要和聚合端⼝配置设置成⼀样才能将物理端⼝加⼊到聚合端⼝。
>>>>>>>>>>>>>>>#
interface port-channel  1
no shutdown
switchport
switchport mode trunk
switchport trunk allow vlan all
>>>>>>>>>>>##
interface Ethernet 0/2
no shutdown
switchport
switchport mode trunk
switchport trunk allow vlan all
channel-group 1 mode active
硬质合金锯片铣刀4、设置mtu
>>>>>>>>>>>>>>>#
#注意:接⼝的设置要和聚合端⼝配置设置成⼀样才能将物理端⼝加⼊到聚合端⼝。
>>>>>>>>>>>>>>>#
interface port-channel  1
no shutdown
紫外光固化树脂switchport
switchport mode trunk
switchport trunk allow vlan all
mtu 9216
>>>>>>>>>>>##递进式分配器
interface Ethernet 0/2
no shutdown
switchport
switchport mode trunk
switchport trunk allow vlan all
dc偏置
mtu 9216
channel-group 1 mode active
光缆接线盒
>>>>>>>>>>>####
vlan 2
no shutdown
interface vlanif 2
no shutdown
mtu 9216

本文发布于:2024-09-21 18:46:03,感谢您对本站的认可!

本文链接:https://www.17tex.com/tex/2/249854.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:配置   设置   结晶   聚合   树脂   递进
留言与评论(共有 0 条评论)
   
验证码:
Copyright ©2019-2024 Comsenz Inc.Powered by © 易纺专利技术学习网 豫ICP备2022007602号 豫公网安备41160202000603 站长QQ:729038198 关于我们 投诉建议