序号 | 标准号 | 标准名称 |
基础标准(21项) |
1 | ISO 836:2001 | Terminology for refractories耐火材料术语 |
2 | ISO 1146:1988 | Pyrometric reference cones for laboratory use—Specification 实验室用标准测温锥—技术条件 |
3 | ISO 1927:1984 | Prepared unshaped refractory materials(dense and insulating)-classification 不定形耐火材料(致密和隔热)—分类 |
4 | ISO 2245:2006 | Shaped insulating refractory products-classification定形隔热耐火制品—分类 |
5 | ISO 5019—1:1984 | Refractory bricks—Dimensions—Part 1: Rectangular bricks耐火砖—尺寸 第一部分:直形砖 |
6 | ISO 5019—2:1984 | Refractory bricks—Dimensions—Part 2: Arch bricks耐火砖—尺寸 第二部分:楔形砖 |
7 | ISO 5019—3:1984 | Refractory bricks—Dimensions—Part 3: Rectangular checker bricks for regenerative furnace 耐火砖—尺寸 第三部分:蓄热室用直形格子砖 |
8 | ISO 5019—4:1988 | Refractory bricks—Dimensions—Part 4: Dome bricks for electric arc furnace roofs 耐火砖—尺寸 第四部分:电弧炉炉顶用球顶砖 |
9 | ISO 5019—5:1984 | Refractory bricks—Dimensions—Part 5: Skewbacks耐火砖—尺寸 第五部分:拱脚砖 |
10 | ISO 5019—6:2005 | Refractory bricks—Dimensions—Part 6: Basic bricks for oxygen steel-making converters耐火砖—尺寸 第六部分:氧化炼钢转炉用碱性砖 |
11 | ISO 5022:1979 | Shaped refractory products—Sampling and acceptance testing定形耐火制品—抽样及验收检验 |
12 | ISO 5417:1986 | Refractory bricks for use in rotary kilns—Dimensions回转窑用砖—尺寸 |
13 | ISO 8656—1:1988 | Refractory products—Sampling of raw materials and unshaped products—Part 1: Sampling scheme耐火制品—耐火原料和不定形耐火材料抽样第一部分:抽样方案 |
14 | ISO 9205:1988 | Refractory bricks for use in rotary kilns- hot- face identification marking 回转窑用耐火砖—热面标记 |
15 | ISO 10080:1990 | Refractory products—Classification of dense ,shaped acid—resisting products 耐火制品—致密定形耐酸制品的分类 |
16 | ISO 10081—1:2003 | Classification of dense ,shaped refractory products—Part 1:Alumina-silica 致密定形耐火制品的分类 第一部分:铝硅质耐火制品 |
17 | ISO 10081—2:2003 | Classification of dense ,shaped refractory products—Part 2: Basic products containing less than 7% residual carbon致密定形耐火制品的分类 第二部分:残炭量小于7%的碱性耐火制品 |
18 | ISO 10081—3:2003 | Classification of dense ,shaped refractory products—Part 3: Basic products containing from? 7% to 50% residual carbon致密定形耐火制品的分类 第三部分:残炭量7%—50%的碱性耐火制品 |
19 | ISO 10081—4:2007 | Classification of dense ,shaped refractory products—Part 4: Special products致密定形耐火制品的分类 第四部分:特殊制品 |
20 | ISO 12678—1:1996 | Refractory products—Measurement of dimension and external defects of refractory bricks—part 1: Dimension and conformity to drawings耐火制品—耐火砖尺寸和外观缺陷的检验 第一部分:实际尺寸与设计图纸尺寸的一致性 |
21 | ISO 12678—2:1996 | Refractory products—Measurement of dimension and external defects of refractory bricks—part 2: Corner and edge defects and other surface imperfections 耐火制品—耐火砖尺寸和外观缺陷的检验 第二部分:边角缺陷及其他表面缺陷 |
|
22 | ISO 528:1983 | Refractory products—Determination of refractoriness 耐火制品—耐火度的测定 |
23 | ISO 1893:2007 | Refractory products—Determination of refractoriness under load—differential method with rising temperature 耐火制品—荷重软化温度的测定(示差—升温法) |
24 | ISO 2477:2005 | Shaped insulating refractory products—determination of permanent change in dimensions on heating 定形隔热耐火制品—加热永久线变化的测试 |
25 | ISO 2478:1987 | Dense shaped refractory products—determination of permanent change in dimensions on heating 致密定形耐火制品—加热永久线变化的测试 |
26 | ISO 3187:1989 | Refractory products—Determination of creep in compression 耐火制品—压蠕变的测定 |
27 | ISO 5013:1985 | Refractory products—Determination of modulus of rupture? at elevated temperature 耐火制品—高温抗折强度的测定 |
28 | ISO 5014:1997 | Dense and insulating shaped refractory products—Determination of modulus of rupture? at ambient temperature? 致密和隔热耐火制品—常温抗折强度的测定 |
29 | ISO 5016:1997 | Shaped insulating refractory products—Determination of bulk density and true porosity定形隔热耐火制品—体积密度和真气孔率的测试 |
30 | ISO 5017:1998 | Dense shaped refractory products—Determination of bulk density ,apparent porosity and true porosity致密定形耐火制品—体积密度、显气孔率和真气孔率的测试 |
31 | ISO 5018:1983 | Refractory materials—determination of true density耐火材料—真密度的测定 |
32 | ISO 8840:1987 | Refractory materials—determination of bulk density of granular materials 耐火材料—颗粒材料体积密度的测定 |
33 | ISO 8841:1991 | Dense shaped refractory products—Determination of permeability to gases 致密定形耐火制品—透气度的测定 |
34 | ISO 8890:1988 | Dense shaped refractory products—Determination of resistance to sulfuric acid 致密定形耐火制品—抗硫酸侵蚀性的测定 |
35 | ISO 8894—1:2010 | Refractory materials—Determination of thermal conductivity—Part 1:Hot—wire method(cross—array) 耐火材料—导热系数的测定 第一部分:十字热线法 |
36 | ISO 8894—2:2007 | Refractory materials—Determination of thermal conductivity—Part 2:Hot—wire method(parallel) 耐火材料—导热系数的测定 第二部分:平行线法 |
37 | ISO 8895:2004 | Shaped insulating refractory products—Determination of cold crushing strength 定形隔热耐火制品—常温耐压强度的测定 |
38 | ISO 10059—1:1992 | Dense shaped refractory products—Determination of cold compressive strength Part 1: Referee test without packing 致密定形耐火制品—常温耐压强度的测定 第一部分:无衬垫仲裁法 |
山体滑坡监测39 | ISO 10059—2:2003 | Dense shaped refractory products—Determination of cold compressive strength Part 2: Test with packing 致密定形耐火制品—常温耐压强度的测定 第二部分:衬垫法 |
40 | ISO 10060:1993 | Dense shaped refractory products—test methods for products containing carbon 致密定形耐火制品—含碳制品试验方法 |
41 | ISO 10635:1999 | Refractory products—methods of test for ceramic fiber products 耐火制品—陶瓷纤维制品试验方法 |
42 | ISO 12676:2000 | Refractory products—Determination of resistance to carbon monoxide 耐火制品—抗一氧化碳性能的确定 |
43 | ISO 12680—1:2005 | Methods of test for refractory products—Part 1:Determination of dynamic Young,s modulus by impulse excitation of vibration耐火材料试验方法—第一部分:脉冲激发振动法测定杨氏模量 |
44 | ISO 13765—1:2004 | Refractory mortars—Part 1: Determination of consistency using the penetrating cone method耐火泥浆 第一部分:针入度法测定稠度 |
45 | ISO 13765—2:2004 | Refractory mortars—Part 2: Determination of consistency using the reciprocating flow table method耐火泥浆 第二部分:流动法测定稠度 |
46 | ISO 13765—3:2004 | Refractory mortars—Part 3: Determination of joint stability耐火泥浆 第三部分:粘结稳定性(粘结时间)的测定 |
47 | ISO 13765—4:2004 | Refractory mortars—Part 4: Determination of flexural bonding strength 耐火泥浆 第四部分:抗折粘结强度的测定 |
48 | ISO 13765—5:2004 | Refractory mortars—Part 5: Determination of grain size distribution(sieve analysis)耐火泥浆 第五部分:粒度分布(筛分析)的测定 |
49 | ISO 13765—6:2004 | Refractory mortars—Part 6: Determination of moisture content of ready—mixed mortars耐火泥浆 第六部分:湿态成品泥浆含水量的测定 |
50 | ISO 16282:2007 | Dense shaped refractory products—Determination of resistance to abrasion at ambient temperature 致密定形耐火制品 常温耐磨试验方法 |
51 | ISO 20182:2008 | Refractory test—piece preparation—Gunning refractory panels by the? pneumatic-nozzle mixing type guns 耐火材料试样的制备—采用气动—喷嘴混合型喷射方法制备耐火喷射料大样 |
化学分析方法标准(贴片变压器19项) |
52 | ISO 10058—1:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica菱镁矿和白云石耐火制品化学分析方法(可与X射线荧光法并行使用的另一种方法)—第一部分:仪器、试剂、溶样及重量法测定二氧化硅 |
53 | ISO 10058—2:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis菱镁矿和白云石耐火制品化学分析方法(可与X射线荧光法并行使用的另一种方法)—第二部分:湿法化学分析 | d型管
54 | ISO 10058—3:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductivelycoupled plasma atomic emission spectrometry菱镁矿和白云石耐火制品化学分析方法(可与X射线荧光法并行使用的另一种方法)—第三部分:火焰原子吸收分光光度法(FAAS)和感应耦合等离子原子发射光谱法(ICP-AES) |
55 | ISO 12677:2011 | Chemical analysis of refractory products by XRF-Fused cast bead method 耐火制品X—标准车当量数射线荧光化学分析(玻璃样片法) |
56 | ISO 20565—1:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica 含铬耐火制品和含铬原料化学分析方法(可与X射线荧光法并行使用的另一种方法)—第一部分:仪器、试剂、溶样及重量法测定二氧化硅 |
57 | ISO 20565—2:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis含铬耐火制品和含铬原料化学分析方法(可与X射线荧光法并行使用的另一种方法)—第二部分:湿法化学分析 |
58 | ISO 20565—3:2008 | 微型液位开关Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrometry含铬耐火制品和含铬原料化学分析方法(可与X射线荧光法并行使用的另一种方法)—第三部分:火焰原子吸收分光光度法(FAAS)和感应耦合等离子原子发射光谱法(ICP-AES) |
59 | ISO 21068—1:2008 | Chemical analysis of silicon—carbide —containing raw materials and refractory products—Part 1: General information? and sample preparation 含碳化硅原料及耐火制品的化学分析方法—第一部分:总则及制样 |
60 | ISO 21068—2:2008 | Chemical analysis of silicon—carbide —containing raw materials and refractory products—Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide ,total and free silica and total and free silicon 含碳化硅原料及耐火制品的化学分析方法—第二部分:酌减、总碳、游离碳和碳化硅、总游离二氧化硅及游离二氧化硅、总游离硅及游离硅的测定 |
61 | ISO 21068—3:2008 | Chemical analysis of silicon—carbide —containing raw materials and refractory products—Part 3: Determination of nitrogen, oxygen, metallic and oxidic? constituents 含碳化硅原料及耐火制品的化学分析方法—第三部分:氮、氧、金属成分及氧化物的测定 |
62 | ISO 21078—1:2008 | Determination of boron oxide in refractory products—Part 1: Determination of total boron oxide in oxidic? materials for ceramics, glass and glazes耐火制品中B2O3的测定—第一部分:陶瓷、玻璃和釉料用氧化物材料中B2O3总量的测定 |
63 | ISO 21078—2:2006 | Determination of boron oxide in refractory products—Part 2: Acid extraction method of determination of boron oxide in binder 耐火制品中B2O3的测定—第二部分:酸萃取法测定结合剂中的B2O3 |
64 | ISO 21079—1:2008 | Chemical analysis of refractories containing alumina, zirconia and silica—Refractories containing from 5% to 45% of ZrO2 (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution含氧化铝、氧化锆、氧化硅耐火材料化学分析方法—含氧化锆5%—45%的耐火材料(可与X射线荧光法并行使用的另一种方法)—第一部分:仪器、试剂、溶样 |
65 | ISO 21079—2:2008 | 墨菲氏滴管Chemical analysis of refractories containing alumina, zirconia and silica—Refractories containing from 5% to 45% of ZrO2 (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis含氧化铝、氧化锆、氧化硅耐火材料化学分析方法—含氧化锆5%—45%的耐火材料—第二部分:湿法化学分析 |
66 | ISO 21079—3:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrometry含氧化铝、氧化锆、氧化硅耐火材料化学分析方法—含氧化锆5%—45%的耐火材料—第三部分:火焰原子吸收分光光度法(FAAS)和感应耦合等离子原子发射光谱法(ICP-AES) |
67 | ISO 21587—1:2007 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica 铝硅酸盐耐火制品化学分析方法(可与X射线荧光法并行使用的另一种方法)—第一部分:仪器、试剂、溶样及重量法测定二氧化硅 |
68 | ISO 21587—2:2007 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis铝硅酸盐耐火制品化学分析方法(可与X射线荧光法并行使用的另一种方法)—第二部分:湿法化学分析 |
69 | ISO 21587—3:2007 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrometry铝硅酸盐耐火制品化学分析方法(可与X射线荧光法并行使用的另一种方法)—第三部分:火焰原子吸收分光光度法(FAAS)和感应耦合等离子原子发射光谱法(ICP-AES) |
70 | ISO 26845:2008 | Chemical analysis of refractories—General requirement for wet chemical analysis, atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrophotometry methods耐火材料化学分析方法—湿法化学分析、原子吸收光谱及感应耦合等离子原子发射光谱法的一般技术条件 |
其他(技术指南和技术勘误表) |
71 | ISO 10081—2:2003/Cor 1:2008 | Classification of dense ,shaped refractory products—Part 2: Basic products containing less than 7% residual carbon—Technical Corrigendum致密定形耐火制品的分类 第二部分:残炭量小于7%的碱性耐火制品 技术勘误表 |
72 | ISO/TR 21828:2010 | Guidance on standards available for preparation and testing of monolithic, unshaped refractory products 不定形耐火材料制备与试验技术指南 |
| | |