HTL-TTL编码器电机与CUA32接线图

Encoder system connection
4.5 Sensor Module Cabinet-Mounted SMC30
一般工业固废焚烧炉
Control Units and additional system components
198
Manual, (GH1), 10.2008 Edition, 6SL3097-2AH00-0BP5
CAUTION
u魅The sensor power supply can be parameterized to 5 V or 24 V. The sensor may be destroyed if you enter the wrong parameters.
4.5.3.5
X521 / X531 alternative encoder system interface
Table 4-15 X521 / X531 alternative encoder system interface
1) Because the physical transmission media is more robust, the bipolar connection should
always be used. The unipolar connection should only be used if the encoder type does not output push-pull signals.
2) Only from Order No. 6SL3055-0AA00-5CA1 and Firmware 2.4
王宝连CAUTION
When the encoder system is connected via terminals, make sure that the cable shield is connected to the component. Refer to the Chapter "Electrical connection".
Control Units
6.5 CUA32 Control Unit Adapter
AC Drive
250
Manual, (GH6), 06/2008 Edition, 6SL3097-2AL00-0BP3
6.5.3.4
X220 HTL/TTL/SSI encoder interface
Table 6-41 Encoder connection X220
Pin Signal name Technical specifications 1 +Temp KTY or PTC input
开口料
2 SSI_CLK SSI clock, positive
3 SSI_XCLK
SSI clock, negative 4 P_Encoder 5 V / 24 V Encoder power supply 5 P_Encoder 5 V / 24 V Encoder power supply
6 P_Sense Sense input encoder power supply
7 M_Encoder (M) Ground for encoder power supply
8 -Temp Ground for KTY or PTC
9 M_Sense Ground sense input 10 RP R track positive 11
RN R track negative 12 BN    B track negative 13 BP
B track positive
14 AN_SSI_XDAT    A track negative / SSI data negative
15
AP_SSI_DAT
7-acaA track positive / SSI data positive
Type: 15-pin sub D connector
NOTICE
The KTY temperature sensor/the PTC must be connected with the correct polarity.
Cables with integral connectors, Details
1.6 Signal
Cables and Connections
Configuration Manual, 12/2007
27激光切割烟雾净化器
6FX⃞ (✓, ⃞, ✓6FX8…)
6FX⃞ (✓, ⃞, ✓6FX8…)
F n
a l
u
l
y
X220定义定义
6FX5002-2AH001+TEMP KTY84+2
234P_ENCODER 5V/24V
15V 12
5P_ENCODER 5V/24V
67M_ENCODER
0V 108-TEMP
KTY84-11910R+ZEROTRACK 311R-*ZEROTRACK
412B-*B 113B+B 814A-*A 615
A+
A
5
1PH7 电机编码器电缆
CUA32

本文发布于:2024-09-22 19:40:11,感谢您对本站的认可!

本文链接:https://www.17tex.com/tex/2/208797.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:烟雾   编码器   焚烧炉   激光   电缆   切割
留言与评论(共有 0 条评论)
   
验证码:
Copyright ©2019-2024 Comsenz Inc.Powered by © 易纺专利技术学习网 豫ICP备2022007602号 豫公网安备41160202000603 站长QQ:729038198 关于我们 投诉建议