锂离子电池技术英文词句
2.3 assembly line process(5/15)流水线工艺
film loading-vacuum on-film folding-sliding jig backward-top cutting-sliding jig forward-
vacuum off-film unloading 防辐射手机
放上包装膜—抽真空—包装膜折叠-分切夹心的后端-剪掉顶部-分切夹心的前段-释放真空-拿下包装膜 station 岗位 two station 两个岗位
folding 折叠 guide type 指导方式
top cutting 顶部剪切 knife 刀片
2.3 assembly line process(6/15)流水线工艺
j/r loading-vacuum on-j/r jig backward-bottom former up-upper former down-
放极组-抽真空-极组夹具放在后端-模板末端在上面-顶端在下面- 消谐柜路障灯heating forming-former up,down-j/r jig forward-vacuum off-j/r unloading
加热模板-模板上下翻转-极组夹具朝前-释放真空-取下极组
station two station
岗位 两个岗位
heating forming pressing time,preset timer
加热模板 施压时间 施压次数
temperature thermocouple
温度热电耦
time:mmin,2~max.3sec
时间：
press force :40~50kg
压力
temperature:150℃
温度
2.3 assembly line process(7/15)流水线工艺
film loading-fim clamp-sliding jig backward-edge pushing-tab clamp-tab unclamp-
放上包装膜-包装夹具-分切极组末端-整边-放极耳夹具-卸下极耳夹具
sliding jig forward-cell unloading
分切极耳前端
远程电源管理
station two station
heat sealing top
热封
sealing thickness control(micrometer)
infocenter
热封厚度控制（毫米）
sealing control pressing time,preset timer
热封控制 施压时间 施压次数
precision regulator
精度校准
temperature, thermocouple
温度热电耦
time :min.2~max.3sec时间
press force:250kg
压力
temperature:180~250℃
温度
2.3 assembly line process(9/15)流水线工艺
cell loading-vacuum on-sliding jig backward-side cutting-feeding-tab cutting-
放上电芯-抽真空-滑动夹心后端-裁边-流入下工序-剪极耳 sliding jig forward-cacuum off-cell unloaing
滑动夹心前端-释放真空-取下电芯
station two station
side cutting knife
side cutting force 100kg
tab cutting knife
tab cutting force 100kg
2.3 assembly line process(10/15)流水线工艺
cell loading-sliding jig backward-vacuum pad down-open-needle down-e/l filling(e/l-needle up-needle up-vacuum pad up-sliding jig forward-cell unloading
station two station
e/l supply 3kuter sub-tank on equipment
metering pump hi -bar pump,hbd-2bc-17
accuracy; under 3.0;±0.1g
ocer 3.0; ±3.5g
2.3 assembly line process(11/15)流水线工艺
cell loading-sliding jig backward-jig backward-jig up-vacuum(vacuum chamber)-
放上电芯-滑动夹心后端-夹心向后-再向上-抽真空-
sealing block forward-sealing
热封前端- 密封
--sealing block backward-jig down-silding jig forward-cell loading-formation
热封后端- 夹心翻转向下-滑动夹心前端-取下电芯-成型
station two station
vacuum source 740mmhg max.vacuum pump
sealing control pressing time preset tiomer
pressing force, precision regulator
temperature, thermocouple热电偶
time:min.3~max4sec
press force:250kg
temperatrure:180~250℃
2.3 assembly line process(12/15)流水线工艺
cell loading-conveyor drive-numbering-numbering-head down-vacuum on-
放上电芯- 启动传送带- 编号码-编号码-电芯朝下-抽真空
head up-head forwward-head down-vacuum purge-head up-cell unloading
电芯朝上- 电芯朝前- 电芯朝下-真空净化- 电芯朝上-取下电芯
speed controller motor 25W
numbering ink jet printer
cell unloading magacine
2.3 assembly line process(13/15)流水线工艺
piercing-cell loading-sliding jig backward-jig up-vacuum°assing-
穿透？？- 放电芯-滑动夹心后端-夹心向上- 抽真空&脱气
sealing block forward-sealing-sealing block backward-jig down-sliding jig forward-cell loading
热封前端- 热封 –热封后端-滑动夹心前端 –取电芯
station two station
piercing ∮6hole
vacuum source 750mmhg max.vacuum pump
sealing comtrol pressing time ,preset timer
摄像机三脚架
pressing force,preision regulator调整压力
temperature,thermocouple(温度热电偶)
time: min.3~max.4sec时间
press force:250kg(压力)
temperature:180~250℃(温度)
2.3 assembly line process(14/15)流水线工艺
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议