ISO耐火材料国际标准
自动旋转喷雾喷头1.ISO 528:1983 Refractory products－Determination of pyrometric cone equivalent (refractoriness) 耐火制品——耐火度的测定 2.ISO 836：2001 Terminology for refractories 耐火材料术语
3.ISO 1146：1988 Pyrometric reference cones for laboratory use－Specification 实验室用标准测温锥——技术条件
4.ISO 1893:1989 Refractory products－Determination of refractoriness under load (differential - with rising temperature) 耐火制品——荷重软化温度的测定（示差—升温法）
5.ISO 1927:1984 Prepared unshaped refractory materials (dense and insulating) － Classification 不定形耐火材料（致密和隔热）——分类 6.ISO 2245:1990 Shaped insulating refractory products－Classification 定形隔热耐火制品——分类
7.ISO 2477:1987 Shaped insulating refractory products－Determination of permanent change in dimensions on heating 定形隔热耐火制品——加热永久线变化的测定
8.ISO 2478:1987 Dense shaped refractory products－Determination of permanent change in dimensions on heating 致密定形耐火制品——加热永久线变化的测定
9.ISO 3187:1989 Refractory products－Determination of creep in compression 耐火制品——压蠕变的测定
10.ISO 5013:1985 Refractory products－Determination of modulus of rupture at elevated temperatures 耐火制品——高温抗折强度的测定
11.ISO 5014:1997 Dense and insulating shaped refractory products－Determination of modulus of rupture at ambient temperature 致密和隔热耐火制品——常温抗折强度的测定
12.ISO 5016:1997 Shaped insulating refractory products－Determination of bulk density and true porosity 定形隔热耐火制品——体积密度和真气孔率的测定
13.ISO 5017:1998 Dense shaped refractory products－Determination of bulk density, apparent porosity and true porosity 致密定形耐火制品——体积密度、显气孔率和真气孔率的测定
14.ISO 5018:1983 Refractory materials－Determination of true density 耐火材料——真密度的测定
15.ISO 5019-1:1984 Refractory bricks－Dimensions－Part 1: Rectangular bricks 耐火砖——尺寸 第一部分：直形砖 16.ISO 5019-2:1984 Refractory bricks－Dimensions－Part 2: Arch bricks 耐火砖——尺寸 第二部分：楔形砖
17.ISO 5019-3:1984 Refractory bricks－Dimensions－Part 3: Rectangular checker bricks for regenerative furnaces 耐火砖——尺寸 第三部分：蓄热室用直形格子砖
18.ISO 5019-4:1988 Refractory bricks－Dimensions－Part 4: Dome bricks for electric arc furnace roofs 耐火砖——尺寸 第四部分：电弧炉炉顶用球顶砖
19.ISO 5019-5:1984 Refractory bricks－Dimensions－Part 5: Skewbacks 耐火砖——尺寸 第五部分：拱脚砖
20.ISO 5019-6:1984 Refractory bricks－Dimensions－Part 6: Basic bricks for oxygen steel-making converters 耐火砖——尺寸 第六部分：氧气炼钢转炉用碱性砖
21.ISO 5022:1979 Shaped refractory products－Sampling and acceptance testing 定形耐火制品——抽样及验收检验
22.ISO 5417:1986 Refractory bricks for use in rotary kilns－Dimensions 回转窑用耐火砖——尺寸
23.ISO 8656-1:1988 Refractory products－Sampling of raw materials and unshaped products -- Part 1: Sampling scheme 耐火制品——耐火原料和不定形耐火材料抽样 第一部分：抽样方案
24.ISO 8840:1987 Refractory materials－Determination of bulk density of granular materials (grain density) 耐火材料——颗粒材料体积密度（颗粒密度）的测定
25.ISO 8841:1991 Dense, shaped refractory products－Determination of permeability to gases 致密定形耐火制品——透气度的测定
26.ISO 8890:1988 Dense shaped refractory products－Determination of resistance to sulfuric acid 致密定形耐火制品——抗硫酸侵蚀性的测定
钽酸锂晶体
27.ISO 8894-1:1987 Refractory materials－Determination of thermal conductivity－Part 1: Hot-wire method (cross-array) 耐火材料——导热系数的测定 第一部分：十字线法
28.ISO 8894-2:1990 Refractory materials－Determination of thermal conductivity －Part 2: Hot-wire method (parallel) 耐火材料——导热系数的测定 第二部分：平行线法掘进机液压泵
29.ISO 8895:1986 Shaped insulating refractory products－Determination of cold crushing strength 定形隔热耐火制品——常温耐压强度的测定
30.ISO 9205:1988 Refractory bricks for use in rotary kilns－Hot-face identification marking 回转窑用耐火砖——热面标记
31.ISO 10058:1992 Magnesites and dolomites－Chemical analysis 菱镁矿和白云石——化学分析方法
32.ISO 10059-1:1992 Dense, shaped refractory products－Determination of cold compressive strength－Part 1: Referee test without packing 致密定形耐火制品——常温耐压强度的测定 第一部分：无衬垫仲裁法
便当袋33.ISO 10059-2:2003 Dense, shaped refractory products－Determination of cold compressive strength－Part 2: Test with packing致密定形耐火制品——常温耐压强度的测定 第二部分：衬垫法
34.ISO 10060:1993 Dense, shaped refractory products－Test methods for products containing carbon 致密定形耐火制品——含碳制品的试验方法
35.ISO 10080:1990 Refractory products－Classification of dense, shaped acid-resisting products 耐火制品——致密定形耐酸制品的分类
36.ISO 10081-1:2003 Classification of dense shaped refractory products－Part 1:Alumina-
标本缸silica 致密定形耐火制品的分类 第一部分：铝硅耐火材料
37.ISO 10081-2:2003 Classification of dense shaped refractory products－Part 2: Basic products containing less than 7 % residual carbon致密定形耐火制品的分类 第二部分：残炭量小于7%的碱性耐火制品
38.ISO 10081-3:2003 Classification of dense shaped refractory products－Part 3: Basic products containing from 7% to 50% residual carbon致密定形耐火制品的分类 第三部分：残炭量7%～50%的碱性耐火制品
远程电源管理
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议