聚苯乙烯反应器设计

摘要

本文是对10万吨/年高抗冲聚苯乙烯（HIPS）的生产过程设计中反应器进行的设计，通过采用反应器设计的一系列方法以及强度校核等方法，设计出了生产反应所需的反应器，并且对反应器的零部件进行了简要计算，进而选出了零部件的型号；另外，本文还对所设计的反应器的过程控制、开停车方案以及危险性分析等作了说明，从而对所设计的反应器进行了全方位的分析；在本文的最后，附上了反应器的装配图，便于制造时进行参考。总之，本文为整个生产的工艺过程打下良好的基础。

关键词：反应器设计；高抗冲聚苯乙烯生产；过程控制；反应器装配图

ABSTRACT

闪蒸器This article is written for the reactor of 50000 tons one year of HIPS’s production process design. Through a series ways of reactor design and strength check, the reactor needed for reaction is designed out, and a brief calculation for parts of the reactor has been carried out. And then the models of the parts has been selected. In addition, the article als

o talks about on the design of the reactor process control, starting and ending the process, as well as risk analysis. And thus a comprehensive analysis of the reactor is carried. In the end of this article, the assembly drawing of the reactor is attached, which is convenient to refer to while manufactured. In short, this article lays a good foundation for the entire production process.

Keywords: reactor design; HIPS production; process control; reactor assembly drawing

本文发布于:2024-09-22 03:29:06，感谢您对本站的认可！

本文链接：https://www.17tex.com/tex/1/361304.html

上一篇：凝析油稳定装置模拟与优化

下一篇：闪蒸干燥机风险点告知牌

标签：反应器设计过程进行生产控制分析方法

留言与评论（共有 0 条评论）