编号 | 中文名称 | 英文名称 |
IEC 61073-1-2009 | 纤维光学互连器件和无源元件.光学纤维和光缆用机械接头和熔融接头保护器.第1部分:通用规范 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
IEC 61076-3-114-2009 | 电子设备用连接器.产品要求.第3-114部分:矩形连接器.合并IEC 60603-7系列接口的工业环境用频带在600MHz以下 | Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specifications for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
IEC 61188-5-8-2007 | 印制板和印制板组件.设计和使用.第5-8部分:附件(结合区/接头)考虑要素.区域阵列组件(BGA, FBGA, CGA, LGA) | Printed boards and printed board assemblies - Design and use - Part 5-8: Attachment (land/joint) considerations - Area array components (BGA, FBGA, CGA, LGA) |
IEC 62275-2006 | 电缆管理系统.电器设备用电缆接头 | Cable management systems - Cable ties for electrical installations |
ISO 10042 Technical Corrigendum 1-2006 | 焊接.铝和铝合金的弧焊接头.缺陷质量分级.技术勘误1 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections; Technical Corrigendum 1 |
ISO 10042-2005 | 焊接铝和铝合金的弧焊接头缺陷质量分级指南 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections |
ISO 1022-1988 | 航空航天流体系统用气态氧充气接头(旧型) 尺寸(英制系列) | Aerospace; gaseous oxygen replenishment connection for use in fluid systems (old type); dimensions (inch series) |
ISO 10321-2008 | 土工织物.用宽条法对接头/接缝处的拉伸试验 | Geosynthetics - Tensile test for joints/seams by wide-width strip method |
ISO 1034-1973 | 航空器地面空气调节连接接头 | Aircraft; Ground air-conditioning connections |
ISO 10955-1999 | 航空航天航空器操纵钢丝绳用末端接头和松紧套筒技术规范 | Aerospace - End-fittings and turnbarrels for aircraft control wire rope - Technical specification |
ISO 10983-1999 | 木结构实心木材指型接头生产要求 | Timber structures - Solid timber finger-jointing - Production requirements |
ISO 11-1987 | 航空器压力座舱的地面压力试验连接接头 | Aircraft; Ground pressure testing connections for pressure cabins |
ISO 11144-1995 | 牙科设备供水及排水管接头 | Dental equipment - Connections for supply and waste lines |
ISO 1167-1-2006 | 流体传输用热塑管、接头和组件.抗内压力的测定.第1部分:通用方法 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method |
ISO 1167-2-2006 | 流体传输用热塑管、接头和组件.抗内压力的测定.第2部分:管试件的准备 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces |
ISO 12118-1995 | 航空货运设备全向额定承载能力等于或高于22250N(50001bf)的双螺柱系留接头的识别标志 | Air cargo equipment - Identification of double-stud tie-down fittings having an omnidirectional rated load capacity of 22250 N (5000 lbf) or above |
ISO 12151-1-1999 | 液压传动和通用联接件软管接头第1部分:带ISO 8434-3 O形圈端面密封末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
ISO 12151-2-2003 | 液压传动和通用联接件.软管接头.第2部分:带ISO 8434-1 O形圈24锥形末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings |
ISO 12151-3-1999 | 液压传动和通用联接件软管接头第3部分:带ISO6162法兰末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends |
ISO 12151-4-2007 | 用于液压流体传动和一般用途的接头.软管配件.第4部分:带ISO 6149米制螺柱头的软管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Part 4: Hose fittings with ISO 6149 metric stud ends |
ISO 12151-5-2007 | 用于液压流体传动和一般用途的接头.软管配件.第5部分:带ISO 8434-2 37°扩口端的软管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with ISO 8434-2 37° flared ends |
ISO 13486-1-1999 | 道路车辆液压制动系统第1部分:双喇叭口管、螺纹孔、阳螺纹管接头和管座 | Road vehicles - Hydraulic braking systems - Part 1: Double-flare pipes, tapped holes, male fittings and tube seats |
ISO 13919-1-1996 | 焊接电子束和激光焊接头缺陷的质量分级指南第1部分:钢 | Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel |
ISO 13919-2-2001 | 焊接电子束和激光束焊接接头缺陷质量等级指南第2部分:铝及其可焊合金 | Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys |
ISO 13950 Technical Corrigendum 1-2008 | 塑料管和配件.电熔焊接头的自动识别系统.技术勘误1 | Plastics pipes and fittings - Automatic recognition systems for electrofusion joints; Technical Corrigendum 1 |
ISO 13950-2007 | 塑料管和配件.电熔焊接头的自动识别系统 | Plastics pipes and fittings - Automatic recognition systems for electrofusion joints |
ISO 13953-2001 | 聚乙烯管材和管件拉申强度的测定和熔接对接接头试件的失效模型 | Polyethylene(PE) pipes and fittings - Determination of the tensile strengt and failure mode of test pieces from a butt-fused joint |
ISO 14615-1997 | 粘合剂结构型粘合剂粘结接头的耐久性荷载下暴露在湿度和温度之中 | 回油弯 Adhesives - Durability of structural adhesive joints - Exposure to humidity and temperature under load |
ISO 1465-1989 | 航空器液态氧充填接头相配尺寸 | Aircraft; liquid oxygen replenishment couplings; mating dimensions |
ISO 15171-1-1999 | 用于流体传动和一般用途的管接头诊断用液压管接头第1部分:非压力下连接的管接头 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure |
ISO 15171-2-2000 | 用于流体传动和一般用途的管接头诊断用液压管接头第2部分:带M16×2螺纹端的压力连接接头 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 × 2 end for connection under pressure |
ISO 15236-4-2004 | 钢丝传送带.第4部分:硫化带接头 | Steel cord conveyor belts - Part 4: Vulcanized belt joints |
ISO 15407-1-2000 | 气压传动五气口方向控制阀、规格18mm和26mm 第1部分:不带电接头的安装面 | Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector |
ISO 15509-2001 | 粘合剂工程塑料接头粘合强度的测定 | Adhesives - Determination of the bond strength of engineering-plastic joints |
ISO 15614-8-2002 | 金属材料焊接程序的规范和鉴定.焊接程序试验.第8部分:管对管板接头焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints |
ISO 15615-2002 | 气焊设备.焊接、切割和相关工艺用乙炔复式接头系统.高压装置的安全要求 | Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices |
ISO 15835-1-2009 | 混凝土增强钢.棒材制机械接头用增强耦合器.第1部分:要求 | Steels for the reinforcement of concrete - Reinforcement couplers for mechanical splices of bars - Part 1: Requirements |
ISO 15835-2-2009 | 混凝土加固用钢.棒材机械接头用加固连接件.第2部分:试验方法 | Steels for the reinforcement of concrete - Reinforcement couplers for mechanical splices of bars - Part 2: Test methods |
ISO 16028 AMD 1-2006 | 液压传动.在20MPa(200巴)至31.5MPa(315巴)压力下使用的平面对接型快速接头.规范.修改件1 | Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications; Amendment 1 |
ISO 16028-1999 | 液压传动用于压力为20 MPa(200 bar)~31.5 MPa(315 bar)的平面对接型快速接头规范 | Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications |
ISO 16070-2005 | 石油和天然气工业.下井设备.锁芯轴和落地接头 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples |
ISO 16422-2006 | 托板由定向未增塑聚(氯)乙烯(PVC-O)制成的用于压力下水运输的管道和接头.规范 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications |
ISO 16670-2003 | 木结构.机械紧固件接头.准静态逆循环试验方法 | Timber structures - Joints made with mechanical fasteners - Quasi-static reversed-cyclic test method | 涡轮分子泵
ISO 17636-2003 | 焊缝的无损检验.熔焊接头的放射检验 | Non-destructive testing of welds - Radiographic testing of fusion-welded joints |
ISO 17637-2003 | 焊缝的无损检验.熔焊接头的外观检验 | Non-destructive testing of welds - Visual testing of fusion-welded joints |
ISO 17640-2005 | 焊接的无损检验.焊接接头的超声波检验 | Non-destructive testing of welds - Ultrasonic testing of welded joints |
ISO 17653-2003 | 金属材料接头的破坏检验.电阻点焊的扭转试验 | Destructive tests on welds in metallic materials - Torsion test of resistance spot welds |
ISO 17659-2002 | 焊接.图示焊接接头的多语种术语 | Welding - Multilingual terms for welded joints with illustrations |
ISO 1813-1998 | 带传动多楔带、有接头V带、宽截面带及六角带抗静电带的电导率:特性和试验方法 | Belt drives - V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts - Electrical conductivity of antistatic belts: Characteristics and methods of test |
ISO 18279-2003 | 钎焊.钎焊接头的缺陷 | Brazing - Imperfections in brazed joints |
ISO 18672-1-2009 | 塑料无压埋地排水管管道系统.聚酯混凝土(PRC).第1部分:连接管子和配件的柔性接头. | Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints |
ISO 1966-1973 | 航空器电缆的压接接头 | Crimped joints for aircraft electrical cables |
ISO 2016-1981 | 铜管用毛细管焊接接头组装尺寸和试验方法 | Capillary solder fittings for copper tubes; Assembly dimensions and tests |
ISO 2048-1990 | 弹性密封圈型接头的硬聚氯乙烯(PVC-U)压力管的双承口最小配合深度 | 地面数字电视接收机 Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints; minimum depths of engagement |
ISO 21004-2006 | 塑料管道系统.供水用基于热塑性塑料的多层管道及其接头 | Plastics piping systems - Multilayer pipes and their joints, based on thermoplastics, for water supply |
ISO 21809-3-2008 | 石油和天然气工业.管道运输系统用掩埋于地下或淹没于水下的管道外部覆层.第2部分:安装接头涂层 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings |
ISO 22826-2005 | 金属材料焊缝的破坏性试验.激光和电子束焊接窄接头的硬度试验(维氏和努氏硬度试验) | Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
ISO 23711-2003 | 弹性密封件.灌溉和排水设施用管接头密封件材料的要求.弹性塑料 | Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers |
ISO 2531-1998 | 输水和输气用球墨铸铁管、配件、附件及其接头 | Ductile iron pipes, fittings, accessories and their joints for water or gas applications |
ISO 2553-1992 | 焊接、硬钎焊和软钎焊接头图样上的符号表示法 | Welded, brazed and soldered joints; symbolic representation on drawings |
ISO 2974-2005 | 柴油机.60度锥孔的高压油管接头管端部连接 | Diesel engines - High-pressure fuel injection pipe end-connections with 60 degrees female cone |
ISO 3174-1994 | 航空器用地面设备检查液压系统的连接接头螺纹式 | Aircraft - Connections for checking hydraulic systems by ground appliances - Threaded type |
ISO 3253-1998 | 气焊设备焊接、切割和有关工艺设备的软管接头 | Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
ISO 3458-1976 | 聚乙烯(PE)压力管材和管件间的装配接头内压密封试验 | Assembled joints between fittings and polyethylene (PE) pressure pipes ; Test of leakproofness under internal pressure |
ISO 3459-1976 | 聚乙烯(PE)压力管用机械式管件装配的接头内压试验法和要求 | Polyethylene (PE) pressure pipes; Joints assembled with mechanical fittings; Internal under-pressure test method and requirement |
ISO 3460-1975 | 硬聚氯乙烯(PVC)压力管材公制系列凹法兰管接头尺寸 | Unplasticized polyvinyl chloride (PVC) pressures pipes; Metric series; Dimensions of adapter for backing flange |
ISO 3501-1976 | 聚乙烯(PE)压力管材和管件间的装配接头抗拉拔试验 | Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of resistance to pull out |
ISO 3503-1976 | 聚乙烯(PE)压力管材和管件间的装配接头弯曲时承受内压的密封试验 | Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under internal pressure when subjected to bending |
ISO 3553-1-1987 | 道路车辆点火线圈和分电器的高压接头第1部分:插座型 | Road vehicles; High-tension connections for ignition coils and distributors; Part 1 : Socket-type |
ISO 3553-2-1997 | 道路车辆点火线圈和分电器的高压接头第2部分:插头型 | Road vehicles - High-tension connectors for ignition coils and distributors - Part 2: Plug-types |
ISO 3926-1980 | 造船内河航行滑油和燃料输入管接头、配合尺寸 | Shipbuilding; Inland navigation; Couplings for oil and fuel reception; Mating dimensions |
ISO 4038-1996 | 道路车辆液压制动系统单喇叭口管、螺孔和阳螺纹接头和软管管端接头 | Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings |
ISO 4039-1-1998 | 道路车辆气压制动系统第1部分:有平面密封面的管、阳螺纹管接头和螺纹孔 | Road vehicles - Pneumatic braking systems - Part 1: Pipes, male fittings and tapped holes with facial sealing surface |
ISO 4039-2-1998 | 道路车辆气压制动系统第2部分:有锥形密封面的管、阳螺纹管接头和螺纹孔 | Road vehicles - Pneumatic braking systems - Part 2: Pipes, male fittings and tapped holes with conical sealing surface |
ISO 4132-1979 | 承压管用硬聚氯乙烯(PVC)和金属的接头管件安装长度和螺纹尺寸公制系列 | Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure; Laying lengths and size of threads; Metric series |
ISO 4347-2004 | 板式链、端接头及槽轮.尺寸、计量力和抗拉强度 | Leaf chains, clevises and sheaves - Dimensions, measuring forces and tensile strengths |
ISO 4397-1993 | 流体传动系统和元件管接头及其附件硬管外径和软管内径 | Fluid power systems and components; connectors and associated components; nominal outside diameters of tubes and nominal inside diameters of hoses |
ISO 4399-1995 | 流体传动系统和元件管接头及其附件公称压力系列 | Fluid power systems and components - Connectors and associated components - Nominal pressures |
ISO 4434-1977 | 承压管用硬聚氯乙烯(PVC)接头管件安装长度和螺纹尺寸公制系列 | Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure; Laying length and size of threads; Metric series |
ISO 45-1990 | 航空器压力加油接头 | Aircraft; pressure refuelling connections |
ISO 451-1976 | 飞机.压力加注润滑油接头 | Aircraft; Pressure re-oiling connection |
ISO 485-1973 | 航空器的水-甲醇压力加注接头 | Aircraft water-methanol pressure connections |
ISO 49 Technical Corrigendum 1-1997 | 符合ISO 7-1可锻铸铁管螺纹接头技术勘误1 | Malleable cast iron fittings threaded to ISO 7-1; Technical Corrigendum 1 |
ISO 49-1994 | 符合ISO 7-1可锻铸铁管螺纹接头 | Malleable cast iron fittings threaded to ISO 7-1 |
ISO 5031-1977 | 松散物料连续搬运设备气力输送用接头和软管安全规则 | Continuous mechanical handling equipment for loose bulk materials; Couplings and hose components used in pneumatic handling; Safety code |
ISO 5178-2001 | 金属材料焊接的破坏性试验熔焊接头的焊接金属的纵向拉申试验 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints |
ISO 5183-1-1998 | 电阻焊设备外锥度1:10电极接头第10部分:锥度1:10圆锥形接头 | Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 |
ISO 5183-2-2000 | 电阻点焊外锥度1:10电极接头第2部分:端推力电极用平行柄接头 | Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes |
ISO 5187-1985 | 焊接和相关工艺用软钎焊和硬钎焊接头力学试验方法 | Welding and allied processes; Assemblies made with soft solders and brazing filler metals; Mechanical test methods |
ISO 5290-2001 | 带传动带接头的窄V带槽轮槽形截面为9N/J、15N/J和25N/J(有效系列) | Belt drives - Grooved pulleys for narrow V-belts - Groove sections 9N/J, 15N/J and 25N/J (effective system) |
ISO 5291-1993 | 带传动带接头的三角V带槽轮槽形截面为AJ、BJ、CJ和DJ(有效系列) | Belt drives; grooved pulleys for joined classical V-belts; groove sections AJ, BJ, CJ and DJ (effective system) |
ISO 5356-1-2004 | 麻醉和呼吸设备.锥形接头.第1部分:锥体和锥套 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets |
ISO 5356-2-2006 | 麻醉和呼吸设备.圆锥形接头.第2部分:螺纹承重接头 | Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors |
ISO 5366-1-2000 | 麻醉和呼吸设备气管造口插管第1部分:成人用插管和接头 | Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults |
ISO 5599-1-2001 | 气压传动五气口方向控制阀第1部分:不带电接头的安装面 | Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector |
ISO 5599-2 AMD 1-2004 | 气压传动.五气口方向控制阀.第2部分:带可选电接头的安装面.修改件1 | Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector; Amendment 1 |
ISO 5599-2-2001 | 气压传动五气口方向控制阀第2部分:带可选电接头的安装面 | Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector |
ISO 5620-1-1992 | 造船及海上结构物饮水舱的注水接头第1部分:一般要求 | Shipbuilding and marine structures; filling connection for drinking water tanks; part 1: general requirements |
ISO 5620-2-1992 | 造船及海上结构物饮水舱的注水接头第2部分:零件 | Shipbuilding and marine structures; filling connection for drinking water tanks; part 2: components |
ISO 5675-2008 | 农业拖拉机和机械.一般用快速液压接头 | Agricultural tractors and machinery - General purpose quick-action hydraulic couplers |
ISO 5676-1983 | 农林用拖拉机和机械液压接头制动回路 | Tractors and machinery for agriculture and forestry; Hydraulic coupling; Braking circuit |
ISO 5817-2003 | 焊接.钢、镍、钛及其合金熔焊接头(束焊除外).缺陷的质量分级 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections |
ISO 5821-2009 | 电阻焊接.点焊电极帽接头 | Resistance welding - Spot welding electrode caps |
ISO 5828-2001 | 电阻焊设备连接水冷接头的二次连接电缆尺寸及特性 | Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics |
ISO 5829-1984 | 电阻点焊内锥度为1:10的电极接头 | Resistance spot welding; Electrode adaptors, female taper 1 : 10 |
ISO 5855-3-1999 | 航空航天 MJ螺纹第3部分:液体系统管接头螺纹系统的极限尺寸 | Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluid systems |
ISO 5866-1983 | 航空器有扁接头的2型和3A型插座式的换向继电器间隙和固定尺寸 | Aircraft; 2 and 3A plug-in base change-over relays, Type II, with crimped connections; Clearance and fixing dimensions |
ISO 5887-1981 | 航空器乘务员用调压面罩与氧气源的连接接头 | Aircraft; Joints for connecting crew members' regulator masks to oxygen sources |
ISO 594-1-1986 | 注射器、针头及其他医疗器械为6%(鲁尔)的锥形接头第1部分:一般要求 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment; Part 1 : General requirements |
ISO 594-2-1998 | 注射器、针头及其他医疗器械为6%(鲁尔)的锥形接头第2部分:锁紧接头 | Conical fittings with 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 2: Lock fittings |
ISO 6038-1993 | 电影 70mm、65mm、35mm和16mm电影影片接头尺寸和位置 | 沼气发酵罐Cinematography; splices for use on 70 mm, 65 mm, 35 mm and 16 mm motion-picture films; dimensions and locations |
ISO 610-1990 | 刮板输送机和刨煤机用高强度钢链带(无接头无形连接) | High-tensile steel chains (round link) for chain conveyors and coal ploughs |
ISO 6149-1-2006 | 用于液压流体传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第1部分:带锪孔沟槽中装有 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal |
ISO 6149-2-2006 | 用于液压传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第2部分:重型(S系列)螺柱端头 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
ISO 6149-3-2006 | 用于液压传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第3部分:轻型(L系列)螺柱端头 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
ISO 6149-4-2006 | 用于传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第4部分:内外六角气门栓的尺寸、设 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
ISO 6150-1988 | 气压传动最高工作压力为10 bar、16 bar和25 bar(1 MPa、1.6 MPa和2.5 MPa)圆柱形快换接头、插头、连接尺寸 | Pneumatic fluid power; cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 MPa and 2,5 MPa); plug connecting dimensions, specifications, application guidelines and testing |
ISO 6455-1983 | 承压管用带弹性密封圈型接头的硬聚氯乙烯(PVC)管件安装长度的测定公制系列 | Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure; Dimensions of laying lengths; Metric series |
ISO 6696-1989 | 自行车用于中接头装配的螺纹 | Cycles; screw threads used in bottom bracket assemblies |
ISO 6699-1990 | 自行车把横管和把立管接头装配尺寸 | Cycles; stem and handlebar bend; assembly dimensions |
ISO 6772-1988 | 航空航天流体系统液压软管、导管和接头组件的冲击试验 | Aerospace; fluid systems; impulse testing of hydraulic hose, tubing and fitting assemblies |
ISO 6891-1983 | 木结构机械紧固件接头强度和变形特性确定的一般原则 | Timber structures; Joints made with mechanical fasteners; General principles for the determination of strength and deformation characteristics |
ISO 7169-2007 | 航空航天.液压系统用24°锥形的、压力范围截至3000psi或21000kPa的可拆卸管接头.采购规范(英制/米制) | 液压软管接头 Aerospace - Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3000 psi or 21000 kPa - Procurement specification, inch/metric |
ISO 7241-1-1987 | 液压传动快换接头第1部分:尺寸和要求 | Hydraulic fluid power; Quick-action couplings; Part 1 : Dimensions and requirements |
ISO 7241-2-2000 | 液压传动快换接头第2部分:试验方法 | Hydraulic fluid power - Quick-action couplings - Part 2: Test methods |
ISO 7257-1983 | 航空器液压管接头和连接接头扭转弯曲试验 | Aircraft; Hydraulic tubing joints and fittings; Rotary flexure test |
ISO 7289-1996 | 气焊、切割及相关工艺用带关闭阀的快速接头 | Quick-action couplings with shut-off valves for gas welding, cutting and allied processes |
ISO 7319-1992 | 航空航天.流体系统.24°锥孔米制管接头的接口 | Aerospace; fluid systems; interface of 24° cone metric couplings |
ISO 7320-1992 | 航空航天流体系统螺纹密封连接接头尺寸 | Aerospace; couplings, threaded and sealed, for fluid systems; dimensions |
ISO 7803-1987 | 商用道路车辆转向球接头 | Commercial road vehicles; Steering ball joints |
ISO 7876-4-2004 | 燃油喷射装置.词汇.第4部分:高压管和末端接头 | Fuel injection equipment - Vocabulary - Part 4: High-pressure pipes and end-connections |
ISO 8056-4-1987 | 航空器镍铬和镍铝热电偶的延伸电缆第4部分:压接式对接接头尺寸 | Aircraft; Nickel-chromium and nickel-aluminium thermocouple extension cables; Part 4 : Crimp-type butt connectors; Dimensions |
ISO 8092-1-1996 | 道路车辆车载电气线束的连接第1部分:单极联接接头尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections; dimensions and specific requirements |
ISO 8092-3-1996 | 道路车辆车载电气线束的连接第3部分:多极连接接头尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections; dimensions and specific requirements |
ISO 8267-1-2005 | 飞行器.牵引杆附属接头的接口要求.第1部分:干线飞行器 | Aircraft - Tow bar attachment fittings interface requirements - Part 1: Main line aircraft |
ISO 8267-2-2005 | 飞行器.牵引杆附属接头的接口要求.第2部分:地方飞行器 | Aircraft - Tow bar attachment fittings interface requirements - Part 2: Regional aircraft |
ISO 8434-1-2007 | 液压传动和通用金属管连接件.第1部分:24°锥形接头 | Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors |
ISO 8434-2-2007 | 液压传动和通用金属管连接件.第2部分:37°扩口管接头 | Metallic tube connections for fluid power and general use - Part 2: 37° flared connectors |
ISO 8434-3-2005 | 用于流体传动和一般用途的金属管接头.第3部分:O形圈端面密封管接头 | Metallic tube connections for fluid power and general use - Part 3: O-ring face seal connectors |
ISO 8483-2003 | 玻璃增强热固性塑料管及配件.栓结法兰接头设计验证的试验方法 | Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints |
ISO 8533-2003 | 玻璃增强热固性塑料管及配件.胶合接头或包好的接头设计验证的试验方法 | Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints |
ISO 8775-1988 | 航空航天流体系统用气氧充填接头(新型) 尺寸(英制) | Aerospace; gaseous oxygen replenishment connection for use in fluid systems (new type); dimensions (inch series) |
ISO 8793-1986 | 钢丝绳套圈卡紧环眼接头 | Steel wire ropes; Ferrule-secured eye terminations |
ISO 8795-2001 | 输送人类生活用水用塑料管道系统流动评定塑料管道和管件及其接头的流动值的测定 | Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints |
ISO 8820-3-2002 | 道路车辆.熔断体.第3部分:带接头的熔断体(刀闸) | Road vehicles - Fuse-links - Part 3: Fuse-links with tabs (blade type) |
ISO 8969-1990 | 木结构单侧冲孔金属板紧固件和接头的试验 | Timber structures; testing of unilateral punched metal plate fasteners and joints |
ISO 8970-1989 | 木结构机械紧固件接头的试验对木材密度要求 | Timber structures; testing of joints made with mechanical fasteners; requirements for wood density |
ISO 9015-1-2001 | 金属材料焊接的破坏性试验硬度试验第1部分:弧焊接头的硬度试验 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
ISO 9538-1996 | 航空航天液压管路安装接头及管接头平面弯曲试验 | Aerospace - Hydraulic tubing joints and fittings - Planar flexure test |
ISO 9623-1997 | 压力流体用聚乙烯(PE)/金属和聚丙烯(PP)/金属接头管件螺纹的设计长度和尺寸公制系列 | PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure - Design lengths and size of threads - Metric series |
ISO 9624-1997 | 压力流体用热塑性塑料管材法兰接头和活套法兰的适配尺寸 | Thermoplastics pipes for fluids under pressure - Mating dimensions of flange adapters and loose backing flanges |
ISO 9691-1992 | 橡胶管接头的密封件制造工艺的建议缺陷类型和描述 | Rubber; recommendations for the workmanship of pipe joint rings; description and classification of imperfections |
ISO 9692-2-1998 | 焊接和相关工艺接头的制备第2部分:钢的埋弧焊 | Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels |
ISO 9692-3-2000 | 焊接和相关工艺接头制备的建议第3部分:铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
ISO 9692-4-2003 | 焊接和相关工艺.接头制备的建议.第4部分:包钢 | Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels |
ISO 9788-1990 | 航空货运设备固定航空货物用承载能力为22250N(5000lbf)双螺柱接头的铸件 | Air cargo equipment; cast components of double stud fitting assembly with a load capacity of 22250 N (5000 lbf), for aircraft cargo restraint |
ISO 9939-1994 | 航空航天滑油的压力加油接头(新型) | Aerospace; pressure re-oiling connection (new type) |
ISO/TR 5987-1984 | 内河航行喷水灭火系统灭火水龙带连接头一般技术要求 | Inland navigation; Water fire-fighting system; Couplings of fire hoses; General technical requirements |
编号 | 中文名称 | 英文名称 |
本文发布于:2024-09-25 16:36:25,感谢您对本站的认可!
本文链接:https://www.17tex.com/tex/1/338141.html
版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。
留言与评论(共有 0 条评论) |