FEATURES
* Current transfer ratio
( CTR : MIN. 50% at I F =5mA, V CE =5V )
* High input-output isolation voltage蚀刻因子 ( V iso =3,750Vrms )
* High collector-emitter voltage
( V CEO = 80V )
* Employs double transfer mold technology
* Subminiature type
小环钗
( The volume is smaller than that of conventional DIP type by as far as 30% ) * Mini-flat package :
2.0mm profile : LTV-356T
* UL approved ( No. E113898 )
* CUL approved ( No. E113898 , 01SC19287 )
穿孔塞焊* CSA approved ( No. 1243207 )
* FIMKO approved ( No. FI-16420 )
* NEMKO approved ( No. P0******* )
* DEMKO approved ( No. 310475-01 )
ee22* SEMKO approved ( No. 0109173 / 01-08 )
* VDE approved ( No. 094722 )
* RoHS compliancetf2o
APPLICATIONS
* Hybrid substrates that require high density mounting.
* Programmable controllers
Part No. : LTV-356T Page : 1 of 11 BNS-OD-C131/A4
ABSOLUTE MAXIMUM RATING
( Ta = 25°C )
PARAMETER SYMBOL RATING UNIT
Forward Current I F50 mA INPUT
Reverse Voltage V R 6 V
Power Dissipation P 70 mW
Collector - Emitter Voltage V CEO80 V
Emitter - Collector Voltage V ECO 6 V OUTPUT
Collector Current I C50 mA
Collector Power Dissipation P C150 mW Total Power Dissipation P tot170 mW *1 Isolation Voltage V iso3,750 Vrms Operating Temperature T opr-55 ~ +110 °C
Storage Temperature T stg-55 ~ +150 °C *2 Soldering Temperature Tsol 260 °C Junction Temperature Tj 125 °C *1. AC For 1 Minute, R.H. = 40 ~ 60%
倒立摆Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and
emitter on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
*2. For 10 Seconds
Part No. :LTV-356T Page : 4 of 11 BNS-OD-C131/A4
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议