编号中文名称英文名称
NF B51-128-1993纤维板.螺钉轴向抽出阻力的测定(FIBREBOARDS. DETERMINATION OF RESISTANCE TO AXIAL WITHDRAWAL OF SCREWS. (EUROPEAN STANDARD EN 320).) NF B51-260-1972木屑板.螺丝拔除试验(PARTICLE BOARD. TEST FOR WITHDRAWAL OF SCREWS.)
NF C20-115-1971标定截面不超过2.5mm**2，线芯无特殊预加
工的硬铜导线连接的无螺钉接线端
(TERMINALS WITHOUT SCREW CLAMPING FOR CONNECTION OF
CONDUCTORS FOR FIXED WIRING,WITH A NOMINAL CROSS-SECTION
NOT EXCEEDIND 2,5 MM2, AND WITHOUT SPECIAL PREPARATION OF
THE CONDUCTOR)
NF C20-116-1981室外铜导线用螺钉丝端子(Terminals with screw campling for external copper conductors.)
NF C60-002-1994家用及类似用低压电路用连接装置.第2-2部
分：不带螺钉型夹件的分开的部件连接装置
的特别要求
(Connecting devices for low voltage circuits for household
and similar purposes. Part 2-2 : particular requirements
for connecting devices as separate entities with screwless-
type clamping units)
NF C83-403-803-2003详细规范：防松螺钉不可拆卸的厚度为0.8MM
的带扁平触点的矩形连接器
(Detail Specification : rectangular connectors - Flat
contacts, 0,8 mm thickness, locking screw not detachable.)
NF C93-561-1981电子元件.螺钉锁定的小型同轴接头.一般规
定
(Components for electronic equipment. Miniature coaxial
connectors with screw coupling. General requirements.)
NF C93-566-1981电子元件.螺钉锁定射频用同轴接头（ＫＮ
系列）.一般规定
(ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREW
COUPLING (TYPE KN). GENERAL REQUIREMENTS.)
法国螺钉标准(NF screw standards)
NF C93-578-1996射频连接件.第20部分：外导线内径为 13.56mm(0,534 in)同时带有两条内导线的
人工膜肺屏蔽平衡电缆用双头螺钉(3/4-20统
(Radio-frequency connectors. Part 25 : two-pole screw (3/4-
20 unef) coupled connectors for use with shielded balanced
cables having twin inner conductors with inner diameter of
outer conductor1356mm(0534in)(type twhn))
NF E02-312-1981钢制规.螺丝孔莫氏锥环规(STEEL GAUGES. MORSE TAPER RING GAUGES.) NF E02-316-1981钢制规.螺丝孔５％锥度环规(STEEL GAUGES. METRIC TAPER RING GAUGES.)
NF E03-152-1981用极限量规检验螺纹.螺钉用螺纹规(Thread checking with limit gauges. Threaded gauges for screw.) NF E03-154-1970公制三角螺纹.用极限规检验螺纹.螺钉和螺
钉孔光滑度检查器
(THREAD CHECKING WITH LIMIT GAUGES. PLAIN GAUGES FOR SCREWS
AND NUTS.)
NF E04-012-1-1996技术制图.螺钉和螺纹部件.第1部分：通用规
范
(Technical drawings. Screw threads and threaded parts. Part
1 : general conventions.)
NF E04-012-2-1996技术制图.螺钉和螺纹部件.第2部分：螺纹嵌
镶件
(TECHNICAL DRAWINGS. SCREW THREADS AND THREADED PARTS. PART
2 : SCREW THREAD INSERTS. (EUROPEAN STANDARD EN ISO 6410-
2).)
NF E04-012-3-1996技术制图.螺钉和螺纹部件.第3部分：简化表
示
(TECHNICAL DRAWINGS. SCREW THREADS AND THREADS AND THREADED
7705acPARTS. PART 3 : SIMPLIFIED REPRESENTATION. (EUROPEAN
STANDARD EN ISO 6410-3).)
NF E22-201-1992滚珠螺钉.第1部分：词汇和命名(Ball screws. Part 1 : vocabulary and designation.)
NF E22-202-1992滚珠螺钉.第2部分：公称直径和公称引线.米
制系列
(Ball screws. Part 2 : nominal diameters and nominal leads.
Metric series.)
NF E22-203-1993球端螺钉.第3部分：合格条件和合格试验(Ball screws. Part 3 : acceptance conditions and acceptance tests.)
NF E25-011-1992紧固件的机械特性.由非亚铁金属制造的螺 (MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS
AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN
28839).)
NF E25-018-2-1994沉头螺钉.第2部分：十字槽(CONTERSUNK FLAT HEAD SCREWS. PART 2 : PENETRATION DEPTHY OF CROSS RECESSES. (EUROPEAN STANDARD EN ISO 7721-2).)
NF E25-021-1994螺钉的十字槽(欧洲标准EN ISO 4757)(Cross recesses for screws.)
NF E25-022-1-2001紧固件公差.螺栓、螺钉、双头螺栓和螺母.
第1部分：产品等级A、B及C
(Tolerances for fasteners - Bolts, screws, studs and nuts -
Part 1 : product grades A, B and C.)
NF E25-022-1987紧固件.Ｆ级螺钉和螺帽公差（精密机械）.
螺纹直径1到3mm
鞋架(FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCT
GRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3
MM.)
NF E25-023-1992紧固件.螺栓和螺钉的自由尺寸孔(Fasteners. Clearance hole for bolts and screws.)
NF E25-100-1-1999碳钢合金制成的紧固件的机械性能.第1部
分：螺栓、螺钉和螺柱
(Mechanical properties of fasteners made of carbon steel
and alloy steel - Part 1 : bolts, screws and studs.)
NF E25-100-3-1992紧固件.表面不连续性.第1部分：一般要求的
螺栓、螺钉和螺柱
(FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS
不锈钢消声器AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN
26157-1).)
NF E25-100-4-1992紧固件.表面不连续性.第3部分：特殊要求的
螺栓、螺钉和螺柱
(FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW
自来水供水系统
AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN
26157-3).)
NF E25-100-5-1998碳钢和不锈钢制紧固件的机械性能.第5部
分：不处在拉伸应力下的固定螺钉和类似螺
纹紧固件
(Mechanical properties of fasteners made of carbon steel
and alloy steel. Part 5 : set screws and similar threaded
fasteners not under tensile stresses.)
NF E25-100-6-1998不锈钢紧固件耐腐蚀的机械特性.螺栓，螺丝
和双端螺栓
(Mechanical properties of corrosion-resistant stainless-
steel fasteners. Part 1 : bolts, screws and studs.)
NF E25-100-7-1995紧固件的机械性能.第7部分：公称直径1-
10mm的螺栓和螺钉的扭力试验和最小扭矩远程教学系统
(MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL
TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL
DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).)
NF E25-100-8-1998不锈钢紧固件耐腐蚀的机械特性.不低于拉
伸应力下配套螺钉和类似紧固件
(Mechanical properties of corrosion-resistant stainless-
steel fasteners. Part 3 : set screws and similar fasteners
not under tensile stress.)
NF E25-107-1983金属用螺钉.内部六叶埋头.Ａ级.符号ＦＸ(SCREWS. SIX LOBES RECESSED CONTERSUNK HEAD. PRODUCT GRADE A. SYMBOL FX.)
NF E25-108-2001半埋头内六角螺钉(Hexalobular socket raised countersunk head screws.) NF E25-109-2001平头内六角螺钉(Hexalobular socket pan head screws.)
NF E25-110-2001圆柱头内六角螺钉(Hexalobular socket head cap screws.)
NF E25-111-2001凸头内六角螺钉(Hexalobular socket cheese head screws.)
NF E25-114-2001六角头螺钉.产品等级A和B(Hexagon head bolts - Product grades A and B.)
NF E25-115-2-2001六角头螺钉.产品等级C(Hexagon head screws - Product grade C.)
NF E25-116-1983金属用螺钉.方头.标准杆.A和B级.符号Q(Square head screws. Product grades A and B. Symbol Q.) NF E25-117-1983金属用螺钉.方头.全螺纹.A和B级.符号Q(Square head screws. Product grades A and B. Symbol Q.) NF E25-118-1983金属用螺钉.方头.C级.符号Q(Square head screws. Product grade C. Symbol Q.)
NF E25-119-1-1994带有H型或Z型的十字槽沉头螺钉(普通头
型).产品等级A.第1部分：性能类别4.8的钢
(Countersunk flat head screws (common head style) with type
H or type Z cross recessed. Product grade A. Part 1 : steel
of property class 4.8.)
NF E25-119-2-1994十字槽沉头螺钉(一般头形).等级A.第2部
分:8.8类特性钢，不锈钢和有金属
(Cross recessed countersunk flat head scews (common head
style). Grade A. Part 2 : steel of property class 8.8,
stainless steel and non-ferrous metals.)
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议