、、
HY01(CBJ)型齿轮油泵
DCB-B600~1000低噪音大流量泵(圆形)
DCB-B600~1000低噪音大流量泵(椭圆形)CB-B双联齿轮泵
CB-0.8油泵电机装置
CB-BJZ齿轮泵电机组(卧式)
BB-BJZ摆线齿轮泵电机组(立卧式)
LBZ立式齿轮泵电机装置
SNBY双向润滑油泵
车载厨房
CB-FA(Fc)型高压齿轮泵
KCB
-5-32300510~1.510m /s OUTLINE
KCB type gear oil transferring pumps are applicable to transfer various kind of oil like crude oil, diesel, lubricating oil. If equipped with copper gears they can transfer low flash point liquid like gasoline and benzene and soon on. Temperature of medium is not over 70. If for high temperature resistant pump, only change material to high temperature resistant type
material.for this kind of pump, the temperature can`t be over -5-32300, viscosity should be 510~1.510m /s. L ubricating oil, heavy oil, light oil for industry purpose, edible oil which are free of solid and fibre, no corrosion. They are applicable in bulk plants, wharf, water crafts, factories, farmers and mines and so on.
01
WORKING PRINCIPLE
() A B (A)(B)
取根
3Rated flow is 12m /h (200L/min)
pump with relief valve (200L/min)
MODEL MEANING
A pair of reverse gears are fitted in this type of pump, one is drive, the other is passive, depend on mesh between the two gears, the whole operating chamber is divided into two independent parts.As right drawing,A is suction chamber,
B is discharge chamber.When pump runs, drive gear lead the passive gear rotate, when gear work from mesh to depart, a partial vacuum will occure at suction side (A), the liquid is sucked in the sucked liquid is fill each gear valley and lead to outlet side (B), when gear mesh, the liquid is squeezed out and become high pressure liquid, then drained from exhaust port.
STRUCTURAL AND FEATURES
(1)
(2)
(3)
KCB-300~960
KCB-18.3~83.3
(4)
(5)
(1)
(2)
(3)
(4)
02
1. Structure
智能操作票
压缩木耳(1)This type of pumps are horizontal reverse pump, which
is composed of casing, gear, bearing seat, relief valve,bearing
and sealing device and so on.
(2) Casing and bearing seat are made of cast iron gear
is made of superior carbon steel, if customers require, it can
also be made of copper and stainless steel.
(3)There is a packing gland in the bearing seat,for axial
seal purpose. KCB-300~960 type pumps adopt mechanical seal
device, bearing is single row radial ball bearing. KCB-18.3~83.3
type of pumps are composed of three oil-proof rubber seals and
middlelined retainer, adjust two nuts in the gland to control seal.
Copper beryllium powder with oil bearing.Additionally,this
series of pumps can be fitted with packing gland, features of
good sealing, high & low temperature resistant, steady chemical
nature and the packing is supple graphite with self lubricating
property.
(4) In the pump there is a relief valve,when failures occur
to the pump or exhaust pipeline, or completely close the dis-
charge valve by mistake to produce high pressure or high pr-
essure impact, relief valve will be opened automatically,to
spoil partial or all high pressure liquid return to low pressure
chamber, thus it keeps safety and protect pumps and pipelines.
(5) Directly connect with drive motor with flexible coupler,
and installed on a public cast iron base
2. Features
(1) This type of pump is in smart and impact structure,
convenient operation and maintenance.
(2) This series of pump features of good self-priming,so
it is not necessary to pour lubricant for ordinary work.
(3) The lubrication of this type of pumps are automatically
completed by transferring liquid, so no lubricant will be poured
眼模
for ordinary work.
(4) Transmit power with flexible coupler can compensate
little deviation from installation. The coupler can be in buffer
绿豆肽action when pump is impacted by inevitable pressure surge.
KCB(2CY) TYPE PUMP PERFORMANCE TABLE
2CY TYPE PUMP PERFORMANCE TABLE
03