Version NEC PD Comms Tool User’s Guide
2 | NEC PD COMMS TOOL - USER’S GUIDE
Software Updates
Occasionally updates and enhancements to the NEC PD Comms Tool software will be made available. Use the Check for updates feature in the software to automatically see if a newer version is available.
Technical Support and Feedback
For technical support with the NEC PD Comms Tool product, please check for any Frequently Asked Questions that may help to solve the issue.
Trademarks and Copyright
非法请求
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Apple, Macintosh, Mac and the Mac logo are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
Copyright © 2010-11 NEC Display Solutions, Ltd.
The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by NEC Display Solutions. NEC Display Solutions assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.
All rights reserved. Your rights of ownership are subject to the limitations and restrictions imposed by the copyright laws as outlined below.
It is against the law to copy, reproduce or transmit, including without limitation electronic transmission over any network, any part of the manual except as permitted by the Copyright Act of the United States, Title 17, United States Code. Under the law, copying includes translation into another language or format.
The above is not an inclusive statement of the restrictions imposed on you under the Copyright Act.
For a complete statement of the restrictions imposed on you under the copyright laws of the United States of America, see Title 17, United States Code.
USA and Canada: display
Europe: -display-solutions
Revision 110801
NEC PD COMMS TOOL - USER’S GUIDE | 3 Contents
Precautions: (4)
Supported Display Monitors . . . . . . . . . . . 5
System Requirements . . . . . . . . . . . . . 6
1 Introduction 7
Overview . . . . . . . . . . . . . . . . . . 7
Main Features and Benefits (7)
Example Usage Scenarios . . . . . . . . . . . 7
2 Controls and Functions 8
Communications Interface . . . . . . . . . . 9
Communications Send/Receive Log . . . . . . 10
Controls tab . . . . . . . . . . . . . . . . 11
Power tab . . . . . . . . . . . . . . . . . 13
Schedule tab. . . . . . . . . . . . . . . . 14
Video tab . . . . . . . . . . . . . . . . . 15
Analog tab . . . . . . . . . . . . . . . . . 16
Status tab . . . . . . . . . . . . . . . . . 17
Tile Matrix tab . . . . . . . . . . . . . . . 18
排气歧管Size/Position tab . . . . . . . . . . . . . . 19
IR Remote tab . . . . . . . . . . . . . . . 20
Simple Commands tab. . . . . . . . . . . . 21
Scripting tab . . . . . . . . . . . . . . . . 22
IP Scan tab (24)
3 Frequently Asked Questions 25
4 Troubleshooting 26
5 Scripting Language 27
SETPORT command . . . . . . . . . . . . . 27
FOREACHPORT command . . . . . . . . . . 27
SETMONITORID command . . . . . . . . . . 28
识别腕带
SETPOWER command . . . . . . . . . . . . 28
SETDATETIME command . . . . . . . . . . . 28
SETOPCODE command (29)
WAIT command . . . . . . . . . . . . . . . 29
SENDIR command. . . . . . . . . . . . . . 30
SCHEDULE command . . . . . . . . . . . . 30
SETASSETTAG command . . . . . . . . . . . 33
SAVESETTINGS command . . . . . . . . . . 33
Further Script Examples. . . . . . . . . . . . 33
6 Example Display Connections 34
Daisy-chained RS232 with one COM port . . . . . 35
Daisy-chained RS232 with multiple COM ports . . . 36
Single IP LAN with daisy-chained RS232 . . . . . 37
Multi IP LAN (38)
Wireless multi IP LAN with daisy-chained RS232 . . 39
烟道蝶阀7 Assigning an IP address 40 8 Op Code Names and Values 42
Precautions:
• This software application allows many advanced features of the display to be adjusted.
Care should be taken when making any adjustments to avoid misadjustment. Note:
如何制作
音箱This document covers both the Mac OS and Windows versions of the NEC PD Comms Tool software. The features and functions of both versions are identical unless noted otherwise. This document is intended to be used together with the display’s User Manual and optionally the display’s External Control specification document. It is not intended as a replacement for either.酒瓶盖
Supported Display Monitors
NEC PD Comms Tool supports the following NEC display monitor models:
• NEC P Series (P401, P461, P521, P402, P462 etc)
• NEC X Series (X461UN, X461HB, X431BT, X462UN etc.)
• NEC S Series (S401, S461, S521 etc.)
• NEC M Series (M401, M461 etc.)
• NEC Multeos M40 and M46 [RS232 connection only]
• NEC MultiSync LCD20 Series (LCD4020, LCD4620 etc.) [RS232 connection only]• Newer models not listed may also be supported.
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议