设计题目---SHL35-2.5-A型锅炉设计拖鞋生产设备
摘运维安全审计 要
本设计是针对SHL35-2.5-A的低压燃烟煤锅炉进行的。本设计是在现场参观的基础上，通过查阅大量的文献和资料，结合所学专业知识，对锅炉进行了总体布置和全面的热力计算。目的是掌握锅炉设计的一般计算方法及计算步骤。 锅炉总体结构采用双锅筒横向布置,上升烟道为燃烧室和凝渣管两部分，垂直下行烟道中布置省煤器和两级管式空气预热器，锅炉炉膛全部布满光管水冷壁。设计本着锅炉运行的安全性和可靠性为首要设计特性的准则。综合考虑燃烧，传热，烟气和空气以及工质的动力特性以及磨损和腐蚀。在锅炉设计的过程中，主要考虑的因素是保证炉内着火，炉膛内有足够的辐射热量，煤的燃尽程度以及合理的烟气速度和排烟温度。同时，还要确保有一定的气密性以保证炉膛内进行负压燃烧。在整个设计过程中作为技术支持进行了热力计算、强度计算和烟风阻力计算。其中热力计算包括炉膛、防渣管、锅炉管束、省煤气，空气预热器。为了使小 型锅炉的结构紧凑，大部分受热面都布置在炉膛内。根据结构，锅炉出口布置燃尽室达到飞灰和降尘作用；采用铸铁省煤器，来达到降低排烟温度的要求。
擦鞋巾配方利用CAD,完成了锅炉总图、 炉墙图、钢架图、水系统图，水管图。
关键词菌类生产 热力计算；强度计算；烟风阻力计算
Design of SHL35-2.5-A boiler
Abstract
This design is for SHL35-2.5-A low-pressure boiler burning coal. This design is in the site visit, and on the basis of consulting a large number of documents and the information, combined with the major knowledge, the overall layout of boiler and comprehensive thermodynamic calculation. In order to master the design calculation method and the general calculation steps.
The boiler general structure with double pot horizontal cylinder decorate, up to and incl
uding flue chamber slag tube two parts, the arrangement of vertical downside flue economizer and two levels of tubular air preheater, boiler hearth all be full of light pipe water wall. Design in line with the safety and reliability of the boiler operation for the primary design characteristics of the standards. Comprehensive consideration of the combustion, heat transfer, flue gas and air and working medium of the dynamic properties and wear and corrosion. In the process of boiler design, the main factors that fire is furnace hearth, there is enough heat radiation, coal burns out degree and the smoke of reasonable speed and smoke exhaust temperature. At the same time, to ensure the has certain air tightness to ensure that within the negative pressure combustion chamber. In the design process as a technical support for the thermodynamic calculation, strength calculation and smoke wind resistance calculation. Thermal calculation of the furnace slag, including pipe, the boiler over, province the gas and air preheater. In order to make small boiler compact structure, most of the heating surfaces are decorated in the chamber. According to the structure, boiler room decorate export burn to fly ash and dust role; Using iron economizer, to achieve reduce exhaust temperature requirements.
Use CAD, and completed the general layout, the boiler furnace wall chart, steel figure, water system graph, conduit figure.
Key words thermodynamic calculation; Strength calculation; Smoke wind resistance calculation
摘要 眼镜显示器Ⅰ
Abstract gmr传感器Ⅱ
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议